Hello everyone.
Since the topic is relevant for many samsung vacuum cleaners SC65 / 66/67/68 vacuum cleaners, I decided to make a short review for filters for them.
Samsung Vacuum cleaners SC65 / 66 / 67/68 series belong to the cyclone type vacuum cleaners in which after another 4 filters are installed after a dust collector: foam (as it were), cellulose, intermediate (actually it is not a filter, but a grid to prevent random trash to the pump ) And, after the pump, the non-filter. Nehra filters are a special pain of all vacuum cleaners and therefore I will not touch them, but I will tell about the first two. These two filters served in my vacuum cleaner for quite a long time, but it came that hour when it was stopped performing - foam lost elasticity and was literally "refrigerated", and the cellulose also lost the rigidity of the rubber border and began to fall through the stubborn reinforcement. 
All this leads to intense tightening of dust on the internal elements of the pump, which is then very intensely baked on them and exudes very nasty smell With each inclusion of the vacuum cleaner. In addition, a safety net is still very quickly clogged 
And I don't even say about the non-filter - after that it is necessary to throw away. The entire tragedy of the situation is that the neh-filter can still be found in stores, but I have not met this couple, and only recently their clones appeared on Ali, first of their price was pretty high - more than $ 12, and then the sellers became More and the price "fell" half.
So, on the first impression everything is beautiful 
And this couple is very similar to the originals 
but looking at the closer we notice that dimensions both filters do not coincide with each other 
Perhaps this is not "crime", because The foam filter tightly sits into the plastic frame and easily takes his shape, but it rushed into the eyes. The foam filter, with attentive consideration, is no longer reminiscent of the foam rubber, but a cellular structure like a volumetric grid that is easily purged. 
In the thickness of the porolon to half a centimeter, the thickness of the original, the pitch of the corrugation coincides.
The cellulosic filter is a slightly compressed long fiber, assume cellulose, placed between two kapron fine grids, along the perimeter Wood in a rubber border, which is simultaneously the sealing gasket. Filling fibers more or less uniform 
When installing in the frame there are small gaps on two pointed protrusions 
The thickness of the kayma for half a millimeter is thinner than in the "swelling" original, but according to flexibility it seems rightest that there is good. 
Unlike originals, these filters are not fastened to each other on the one hand, but there is a place for fastening. Technological slots for frame elements coincide. 
View of the assembled state. 
And tests. We turn on a couple of minutes a vacuum cleaner at full capacity, after which we get a cassette with filters, turn over, and ... We are convinced that "failures", and no other artifacts are observed. 
Conclusion: if already "shred" is a good option to extend the resource of a home assistant.
Good luck to all.
Probably every mistress to agree that without such an important thing as a vacuum cleaner, in the house can not do. Among the great variety of models, experts advise, in order to obtain a better result of cleaning. Such models absorb dust occurs more efficiently. They have recently started using popularity. If your model has no device to contain water, allowing cleaning better, then you should not be upset.
How the filter is arranged with water
Even if you recently purchased a vacuum cleaner without an aqua filter or at your disposal there is a slightly forced model, do not worry, let's look at how you can make a water filter for your model of vacuum cleaners with your own hands.
Recently, vacuum cleaners where the aqua filters are installed are incredibly sought-after. With their help you can really clean not only, but even air. When you use aqua-flavorship, it is at all optional to air the room, because the air completely becomes clean after cleaning.
Perfect cleansing due to water use
Some modern models A large amount of foam can form, but this problem can be easily solved, there will be a high-quality defoamer. Before purchasing or independently remade the usual vacuum cleaner into the aquaustion, it is worth knowing all its features and advantages. The main one can attribute the following:
Also, AquaPlasplasmists also have some drawbacks, but they are minor and with them can be completed. By minus the device can be attributed:
Water filter vacuum cleaner
The essence of the water filter is that he is not just struggling with dust, he still produces humid cleaning at the same time, helps in the fight against bacteria, pathogenic organisms, pets, ticks, and fills the room with freshness, cleanliness and moisturizes air.
The essence of the aquaofiltra lies in the tank that is filled with water. The device has a separator that works on the principle of cyclone, thus leading the capacity with water in motion. The mechanism sucks the air polluted and dirt and mud and skips it through the water in the tank. Thus, dust particles are associated with water, the flow further passes through additional filters, and at the output we have clean moisturized air.
Unlike the conventional dry-type vacuum cleaner, you need to be cleaned after each application. To do this, rinse the container and how to dry all the filters that are in it. If this is poor quality, there is a possibility of breeding bacteria.
There are two types of water filters:
The work of this type of aquilifers is the separation of air with dust particles due to centrifugal force. Contaminated particles that fall into the filter remain in water, without falling into the air of the dwelling. The main advantage of the vacuum cleaners of this type is higher in comparison with other cleaning quality, as well as they differ in durability. However, separaty models are not suiced.
Separate filter
The vacuum cleaners of this type are pretty simple design. These devices are better coping with large dust, but with small dust they are not easy. However, this deficiency can be easily corrected by installing additional filters. One of the inconveniences to use a hooking filter is the need for its frequent systematic washing and high-quality drying. In addition, it is equipped with a fairly small liquid tank.
Aqua filter in the vacuum cleaner
Among all the advantages of vacuum cleaners with a water filter, its lack of its drawback is its cost. For this reason, many "masters for all hands" make aquilter for different models of vacuum cleaners with their own hands. You can save not only to buy a vacuum cleaner, but the filter itself makes it from materials that are always at hand.
If you decide to make a filter for a vacuum cleaner with your own hands, and the power of your home vacuum cleaner wants to have a better, at the same time and can be corrected. What to do with it? First of all, it is necessary to replace the paper component on the incoming filter on the incoming filter. This will allow an aggregate with more power to suck dirt and dust. Most inexpensive modifications of vacuum cleaners, suction power is lost due to dense material on the filter. Therefore, it can also be replaced by less dense, thus increasing the total capacity of the device. But at the same time, small particles of dust will be lingering on the filter is not worse.
Before the start of the homemade aquafiltra assembly, it is necessary to prepare all the materials that you need. Among them:
So, let's start with the fact that in the bottom of the aluminum pan cut the circle. Its diameter should be less than a pant diameter of about 3 cm. Next, you need to attach this design to the vacuum cleaner in the place where the air leaves. Pre-in the saucepan need to drill holes.
Simple materials - a great end result
Take plastic bottle And put in a saucepan. In the eggplant it is necessary to make several holes so that it can go out clean, filtered air. We pour about 1-1.5 liters of water into it. By analogy with a purchased vacuum cleaner, the air polluted air will penetrate through the water in which the dirt will remain.
Metal adapters and screws all this design is attached to the exhaust hole of the vacuum cleaner. On the one hand, the corrugated hose is fastened to the adapter, and on the other, we make a slot in it, which will give the effect of the whirlpool inside the eggplant.
Now we will figure out how to do water filterwhich is considered separate. For him, you need to prepare the following:
When everything is prepared, install the casing directly on the dust collector. Next, it is necessary to carefully attach the pump on which the rubber ring will be located. In order to significantly reduce the noise from the device, which occurs directly during operation, it is enough to glue a small amount of polyethylene to the bottom of the vacuum cleaner.
Using girlfriend materials
As can be seen, paying a little time, the minimum of effort and financial costs can be constructed by a rather good water filter for the most ordinary vacuum cleaner. In such work there is nothing complicated, it is not even necessary to have some special knowledge. It is enough to follow the instructions provided by us and you will definitely get a high-quality water filter, which in its characteristics will be much different from purchased and more expensive device. If the assembly process passed successfully, then you can immediately try the fruits of your works.
Many know what kind of building litter is, and how difficult it is to be removed, especially on an industrial scale. There are special construction vacuum cleaners on the market, which have high power, in comparison with domestic, but at the same time have large dimensions and a considerable price. Therefore, the masters of their case creates chips of the type of cyclone with their own hands, thereby improving their household vacuum cleaners and facilitate their work.
The filter is a design of two compartments: external and internal. Under the influence of centrifugal force, all chopping in the dust collector, based on a cyclone principle, is sorted into large and small particles.
About filters. Cyclone filter does not hold more than 97% of dust. Therefore, additional filters are added to them. From English "HEPA" translates as High Efficiency Particulate Air "- a filter for particles contained in the air.
Agree that even you can not imagine your life without such necessary machinerylike a vacuum cleaner? They cope not only with dust, but also with mud.
Of course, vacuum cleaners can be used not only at home, but they are also different: rechargeable, detergent, pneumatic. As well as automotive, low-voltage industrial, ranksis, gasoline, etc.
James Dyson is the first creator of a cyclone vacuum cleaner. The first creation was his creation, G-Force in 1986
A little later in the 1990s, he filed a petition for the manufacture of cyclone devices and had already collected his center for creating vacuum cleaners. In 1993, his first vacuum cleaner was on sale - known as "Dayson DC01". So still, how does this wonder of a cyclone type work?
Looks like the creator Jame Dyson was a wonderful physicist. Thanks to centrifugal strength, the dust is involved.
The device is two-chamber and it is divided into two types - external and internal. The air that spins inside the dust collector moves up as if on the helix.
According to the law, large dust falls into the outer chamber, and in the inner remains everything else. And the purified air comes out of the dust collector through the filters. This is how the vacuum cleaners with a cyclone filter work.
Do not stop your choice on those models that require little power. You will not like this cleaning and most likely, want to throw away such a device.
Interesting! How to cook semiautomatic with carbon dioxide, here!
Do not waste money in vain, and come to buying a vacuum cleaner more seriously. It is only worth contacting the seller consultant and he will help you with the choice of one or another vacuum cleaner.
The device is worth choosing, which is 20-30% more powerful bag vacuum cleaner. It is best to take the one with a capacity of 1800 W. Almost all producers of vacuum cleaners produce models with this filter, which cannot but rejoice.
1. Let's probably, it happened when the Inexsee need was inadvertently necessary in a dust collector? Now this is not a problem, because it is transparent! And you can always notice the items that you need to pull out from there.
This is one of the most important advantages.
2. The power of such vacuum cleaners is maximum and does not slow down and power, even when the container is clogged. Cleaning is much more pleasant, power does not fall, cleaning cleaner.
Such a vacuum cleaner is able to delay much more than you represent. Up to 97% !!! Is it probably true? Although some are unhappy and such a result, since vacuum cleaners with a water filter are preferred.
4. No need to constantly change paper bags for a vacuum cleaner.
5. Power. It does not lose from fullness.
6. It can be perfectly rinsed with water and dried.
1. One of the minuses of these vacuum cleaners is not very pleasant. It is washing and cleaning the filter. Of course, it does not have to clean the container with the help of a brush every day, but all this is one of the minuses. Laziness is present in every person. Yes, of course it is unpleasant to face the fact that the handles need to be stained.
2. Noise. Noise from this type of vacuum cleaner much more than the usual one.
3. Power consumption. It is also much higher than from the ordinary vacuum cleaner. This is a little tornado.
Buy this little miracle or not, to solve only you. In fact, all his merits overlap those not many of its flaws. Clean the house is much more pleasant than not to the end of the completed tidy, agree?
Compared to the old vacuum cleaner, the cyclone dust collector looks rather modestly in size. It is impossible to believe that such a baby is capable of something serious. Now the old vacuum cleaner can only be used with a wet cleaning.
I have accessories, when you first use, insert the pipe not large in diameter, turn on the device, and that's what is really surprising, the brush brush carpets significantly better than my previous helper.
He cleans everything. Dirt, wool of our pets. Previously, it was necessary to make not small efforts to cope with such "now small things."
In the corridor, I have a laminated coating and it is also easily cleaned. The fact is that in my reserve there is another brush, tougher than the previous one for carpets, so I just coped with this task. You know, and the sound of this vacuum cleaner is not so loud as they wrote about it on the Internet.
This apparatus pleases me by the fact that it is light and not so much, and loud. I also liked the storage compartment of all the necessary nozzles, it is very convenient that it is built into the vacuum cleaner itself.
As soon as I found out what this little tornado is capable of, it's time to clean the container. Thank God when I began to shake out the garbage from the dust collector, he fell tightly large lumps.
Since the garbage was tumped by air flow. Claws dust is not visible, and he did not rise into the air! So I finished my first cleaning with my cyclone vacuum cleaner. Washed the container and on this cleaning ended!
All vacuum cleaners are intended for one purpose - purity. We are talking about all the vacuum cleaners and the construction vacuum cleaners are usually used on machines or for cleaning any rooms. These vacuum cleaners are expensive, since the principle of operation of the vacuum cleaner cyclone filter must be selected carefully.
You should also know that most often industrial devices use when repairing and construction. Leave workplace need clean.
If a person has his own workshop, then one of the most important issues is the cleaning of the room.
But unlike the cleaning of dust in the apartment, the usual household vacuum cleaner will not help here, since it is not designed for the construction trash and sawdust - its reservoir for garbage (dust collector or bag) will break very quickly and will be unusable. Therefore, a homemade cyclone filter is often used, which, together with a domestic vacuum cleaner, will help remove the workshop.
Wood dust and other technical garbage although it seems harmless at first glance, but actually makes many different dangers in themselves, both for the master and equipment.
For example, long-term work without means of protection that prevent dust to enter the respiratory authorities can cause serious complications with breathing paths, worsen the smell, etc.
In addition, the tool located in the workshop under the influence of dust can quickly fail. This happens by the fact that:
Thus, the question of quality of removal of feeding products and as a whole cleaning the room is very acute. The modern power tool is equipped with dust and chip and chip systems directly from the sawing zone, which does not allow dust to spread through the workshop. In any case, for the dust removal process you need a vacuum cleaner (or chips)!
There are good industrial vacuum cleaners and if there is an opportunity, it is better to choose the most optimal option For the price and quality and buy a building vacuum cleaner.
Nevertheless, there are cases when there is already a household vacuum cleaner and it is easier to upgrade it and solve the problem of collecting the construction trash in the room. To do this, you need to use a cyclone filter - it is done in half an hour with all the necessary items.
There are a great set of different cyclone constructions, but all of them unites the same principle of operation. All constructions of cyclone chips consist of three main parts:
The design of it is such that the flow of suction air is sent in a circle and it turns out. rotary traffic. Accordingly, the construction trash contained in this air flow (these are large and severe fractions), the centrifugal force is valid, which presses it to the walls of the cyclone chamber and under the action of gravity, it gradually settles in the tank.
The disadvantage of the cyclone vacuum cleaner is that it is possible to collect only dry garbage, but if there is water in the garbage, then there will be a problem when sucking such a substance.
The vacuum cleaner must be quite powerful, as in its regular mode of operation, air suction is supposed to be absorbed through the standard hose.
Since the design is obtained on such a maneuverable, like a separate vacuum cleaner, the length of the last hose must be sufficient for comfortable work.
As mentioned above, you can make a cyclone filter for the workshop for half an hour, but for this you need to check the presence of everything you need for the production of chips with your own hands, namely: tools, materials and consumables.
For the production of work will be needed by the following tools:
Materials can be used both new and used, so carefully view the following list - perhaps something you already have in stock;
Any attempt to spend off without filtering material puts at risk performance Your, possibly acquired for the big money of the device.
In case of impossibility of acquiring no disposable bags, nor reusable, you can at your own risk try Filter to build yourself.
Vacuum cleaner became For many housewives, an indispensable assistant. An important condition for high-quality cleaning is. It is there that all dirt, dust, small garbage particles are gathering. The filter is also responsible for the purity of the air that comes out of the vacuum cleaner, leaving all the contaminated pollution in it.
The better the filtering from your vacuum cleaner, the more dirt settles on the filter walls.
On a note! You can use not only purchased consumables For a vacuum cleaner, but also make them yourself.
So you will not only save money, but you will be sure that it is reliable and effective. Recall what types of filters exist:
The first type of filters created From very tight fabric. It is easy to make enough.
Important! know Suitable for your model of the bag, buy in the construction store the material of a suitable density and sew a bag according to the original dust collector developed by the manufacturer.
To increase the density fabric membrane can be folded in two and more layers. The base for fastening can be cut from thick cardboard or plastic. Fasten the bag to the base in several ways.
In the first we will need glue. With it, we simply fix the neck of the bag between two pieces of cardboard.
In the second case we take Conventional velcro. The first half of the velcro should be glued to a plastic or cardboard base, and the second to sew to the neck of the bag. Your dust collector is ready to use.
Popularitythe aquiltra is not only that with its help, cleaning becomes more efficient, but also in humidification. The entire absorbance trash passes through water tank.
Such a filter created to hold Even fine dust and pollen. This feature of the vacuum cleaner is valued by people who have allergies to dust.
Attention! Due to the water separation located in the case, the vacuum cleaner becomes heavy.
Choosing such a type of home assistant, try whether you can easily move with him around the house.
You can make this type of filter alone. What can I do:
We take a baking powder, a casing and a drive to install all these details on the dust collector of the vacuum cleaner.
As an attachment, you will serve fasteners covered with zinc.
Do not forget to put polyethylene on the bottom of the filter. It will perform noise insulation functions.
The latter install the pump. You can secure it using a rubber ring.
Important! While using the filter, follow the water level.
This variety of vacuum cleaners is popular. Already more than thirty years. The hull itself is easier than that of vacuum cleaners with aqua filter, since it is empty inside. Essencesuch filtration concludesin the impact of centrifugal force on the absorbance inside the garbage. Hurricane wind stream Large and small particles of pollution are settled in different containers. After disconnection Power supply vacuum cleaner you have enoughcapture a container from the body and clean it.
For this homemade filter we will need:
Cut from the cone the bottom and connect it with the pipe. To make a hermetic hole, all holes and cracks close with plywood. Sliced \u200b\u200bpart of the cone connect with a pipe into which all the garbage will fall. The end is the pipes must enter the plastic container. Sealing a piece of plywood. You need to connect with the vacuum cleaner using the output tube. We are attached to the inlet of the vacuum cleaner using the hose.
Cyclone filter with your own hands
How to make an aqua filter
