Our engineering and installation company "Seti Service" solves the problems of Muscovites, as well as residents of the region, which are associated with heating, water supply and sewerage. We are ready to offer you many options for solving your engineering tasks with communications. For example, installation of convectors will help you quickly heat your home and maintain the required temperature level.
One of the advantages of this equipment is the absence of noise during operation. Such characteristics can boast of and, which is in demand among our customers. But it is worth saying that installation of heating convectors will be convenient in any case. After all, it is absolutely easy to control the operation of these units - they have simple and intuitive control.
Convectors of the latest generation are produced according to the most modern projects... Therefore, this equipment can be described as energy saving. Russian manufacturers offer units that are optimal for our conditions. By the way, the convector can be used as a main heating device as well as an auxiliary one. Only high-quality ones compete with convectors.
Despite the low cost of fuel for convectors, installation of a gas convector cannot be called simple. After all, when installing any gas equipment it is worth following all safety rules. Moreover, if it is necessary to equip a gas storage.
The purchase and installation of gas heating convectors depends on the characteristics and characteristics of the room in which it is necessary to maintain temperature regime... By the way, the quality of the device's operation depends on the localization of the unit in the room.
The convector must be securely fastened. A chimney is required to remove the combustion products. It is very important to invite a specialist for the installation activities, since working with gas equipment requires a qualified approach of masters with experience. of any variety - the specialization of our organization!
If you do not want to install a gas convector, then installation of electric convectors will suit you perfectly. They are convenient even in the sense that they do not need utility permits. The electric convector can be installed not only on the wall, but also on the floor and even in the opening.
Do you need very fast heating? Then get a model with a fan. The fan will help the heat to spread faster throughout the room. Economical model - with automation. It will allow you to maintain the required temperature, even when you are not at home, but there will be no overconsumption of energy.
Our company will help you choose the most suitable equipment for you, deliver it free of charge and install it in accordance with all the rules without violating safety regulations. We provide guarantees for all equipment and work. - our strong point! Contact the specialists from the Service Network for help!
The more technical innovations appear, the greater the needs of customers and the more forms of solving engineering problems for the performers. The team of engineers and installers of "Network Service" keeps up with the times in everything that concerns the scope of our work. Floor convectors are a worthwhile novelty. They heat apartments, houses, saunas, shops, offices, restaurants, and swimming pools.
Using floor convectors is the right solution in many technically sound situations. Floor convectors work 100% noiseless. They have a pleasant design, they always function, saving energy and, accordingly, reducing your costs. They are convenient to use. These units are especially often recommended for rooms with high humidity.
We carry out installation of floor convectors Full construction. Our employees have been specially trained and experienced enough to install these units. After it has been carried out using the floor convector, our specialists will check the equipment operation and safety. Both for the units with the materials and for the work of the "Network Service" gives a guarantee!
To create a comfortable temperature regime in the house, it is necessary to correctly select and install all the items for heating. These can be boilers, pipes, various batteries, as well as convectors.
Heating convectors are quite popular things in everyday life, which have been used for a long time for full or additional heating of residential premises.
They are used both in country houses, and in high-rise apartments, they work on simple principle natural convection. That is, the cold air that is from below, it heats, turning it into warm, then warm air, becoming lighter, rises higher, and another cold air comes in its place.
Convectors are electric, electromechanical, gas. And if for the first two, when using them in individual heating, no papers are required, since, in fact, everything complies with safety requirements and laws, and your electricity costs are already your problems, then for a gas convector you will need to draw up the necessary package of documents ...
For full information, you need to contact the company that owns your boiler room. It could be Gorgaz, ZhEK and Teplokommunenergo. If you do not live in a private house, but in an apartment, then you need to find out which company the boiler room belongs to, then contact that company with a request to disconnect your apartment from central heating (if technically possible), and create an individual heating project.
If these actions are technically possible, then you will be provided with a protocol on a positive solution to the issue. But all this needs to be done only if you live in an apartment, in the case when you live in a private house, you can skip this point. Next, you need to get documents for technical conditions in the same companies that provide utilities, this is if you have an apartment.
And only then we turn to design organization, which creates projects for private houses and apartments. After the project has been created, and it must be created in two copies, you contact Gorgaz. There you will agree on the timing of connecting the gas convector to the general gas supply system, and there you will be taken from you one copy of the project.
This is the case with the gas convector. An electric heating convector can be installed without problems, the main thing is that it meets all technical requirements. But in fact, any convector of the new generation is very convenient, it is inexpensive, compact, fits organically into different interior apartment or house and, of course, creates a cozy temperature in your home.
Today for equipment autonomous system heating in country houses is most often used gas appliances... The cost of natural gas is the lowest compared to all types of fuel. That's why gas boilers and got this wide use... But in addition to them, the thermal convector is quite relevant today. gas type... Its work is based on convection heating of air for heating the room. The article will tell you about this equipment and its installation.
Consider a gas convector, its principle of operation is very simple and is based on the ability of a gas to change its properties when the temperature level rises. When cold air passes through the heat exchanger of the convection device, it heats up, decreases in weight and begins to rise. Further, new portions of air masses come. This process is called convection.
The convector can operate on liquefied gas and natural gas.
To change the power supply of the device, you need to reconfigure gas valve... Most often, a gas convector is placed under a window. This makes the unit more efficient. Since it is in this place of the room that the heat loss is greatest.
Consider the device of a gas convector for heating a living space. As a rule, the device consists of the following components:
Depending on the device, all devices are divided into two types: fireplace and parapet. The principle of operation of the fireplace type is similar to the operation of a conventional stove. Parapet options are safer and more environmentally friendly. They are easier to install. Therefore, it is the most widely produced and used species.
Considering the heating reviews, we can say that consumers appreciate these devices. And this is not surprising. After all, gas-type convectors have a lot of positive sides. Of course, like any device, there are a number of disadvantages, but they are not essential.
The main advantages are:
Of the minuses, one can name the need to obtain a permit for installation, the gas pipeline must be supplied separately to each convector, the dimensions are slightly larger than that of a water radiator. The most important disadvantage is that outside wall for mounting, you will have to punch rather large holes.
It is very easy to install a gas-type convector on your own. But before proceeding to the installation process, it is important to choose the appropriate model of the device. On sale there are both domestic inexpensive options and foreign ones, the cost of which is higher. The most important thing is that the product is of high quality and reliable.
Of the imported devices, we can name the Alpine air gas convector from a Turkish manufacturer. This is a high quality series of devices with cast iron heat exchanger. Appearance the unit is quite attractive. Heating power ranges from 2.5 to 9 kW. There are products equipped with a fan.
It is worth noting the Ukrainian gas convector Akog for heating. The manufacturer produces five models with a capacity of 2.3 to 5 kW. The service life is quite long and amounts to 15 years. All models are equipped with Italian safety automatics, microfire igniter.
When gas equipment is purchased, you need to decide on its location. It must fit the dimensions of the device. It is allowed to place convectors only under the window. For installation, you need to prepare the following tools: an electric drill, a pipe cutter, polyurethane foam, silicone, a wrench, metal-plastic pipe, a set of screwdrivers, a gas tap, plastic dowels and self-tapping screws.
In fact, installing a gas convector with your own hands is not difficult at all.
When the location is selected, mark the output of the coaxial pipe. Using a perforator, a hole with a round crown is cut. It is necessary that there is a slight slope towards the street. This will avoid problems in rainy weather.
The dimensions of the pipe extension are made taking into account the characteristics of the model. The device is fixed to the wall with four dowels. Studs may also work. It all depends on the weight. A gap forms between the pipe and the wall. It must be filled in with a special polyurethane foam... The gas is supplied either with a flexible gas hose or with a rigid pipeline. It is important to check the tightness of the connection. The fan and the automatics work from the mains, which must be supplied individually. But you can connect and.
Despite the fact that heating convectors gas reviews all users agree on such an advantage of these units as ease of installation, it is advisable to entrust the installation to specialists with a license to carry out such work. This is especially true for connecting to a gas pipeline. After all, the safety and durability of the equipment largely depends on a high-quality installation.
But consumers know little about what a gas convector is.
A gas heat convector is a device that is capable of generating heat through the combustion of gas. The design of the unit is quite simple.
The figure below shows the construction of a gas convector.
The principle of operation of the apparatus is that the gas, when burned in the chamber, heats heat exchanger... The air flow, passing through the lower openings of the unit, moves through the heat exchanger, takes heat and exits heated into the room through the upper openings. Meanwhile, from the chamber, the products of combustion gas are removed to the outside with the help of double-walled branch pipe(coaxial). Through it, fresh air enters the apparatus from the street to maintain the combustion process.
The principle of operation of the convector
Heaters are classified by type of installation - there are wall and floor models. Distinctive features wall devices can be called their compactness, light weight, efficiency. But they are limited in performance. Their maximum power ratings can only reach up to 10 kW. If you need to warm up a room with a large area, then for this it is better to use a model outdoor type. But such heaters have a large mass, due to big size heat exchanger. Their power can reach several mW.
Wall hung gas boiler
Among the advantages of gas heaters are the following factors.
But such devices also have certain disadvantages of use.
How to choose a gas convector? First of all, attention is paid to specifications unit. The most the best option can be considered a device with a closed combustion chamber and a cast iron heat exchanger. The presence of a programmable control unit is considered important. Consider other factors to look out for when choosing a domestic gas convector.
Since heating is carried out by air circulation, the units work effectively in only one room. Therefore, each room will require the installation of a separate unit. The power is determined from the calculation: 100 watts are required per 1 m 2 of area.
Since gas heating convectors operate on gas that burns in a special chamber, the heat exchanger is exposed to strong temperature effects. If it burns out after some time, the device fails. Therefore, the material of this part must be resistant to high temperatures... The leader among heat exchanger materials is cast iron... This metal is resistant to thermal stress, in addition, it cools very slowly and distributes heat evenly. Gas convectors with a cast iron heat exchanger can last up to 50 years. The main disadvantages of such devices are the high price and large mass of the unit. Heater with heat exchanger made of become cheaper and lighter. But when choosing a unit, you should pay attention to the quality of the steel. Steel heat exchangers can last at least 20 years.
Heaters may differ structurally by the type of combustion chambers:
A gas convector with a fan heats up the entire room quickly and evenly. Due to the forced supply of air to the heat exchanger, the latter is better cooled. And since overheating is not allowed, the service life of the heat exchanger is significantly increased.
If you want to install a convector in the apartment, then the best choice there will be an apparatus with a combustion chamber closed type and chimney with coaxial pipe... This type of apparatus does not burn oxygen in the room. V private buildings you can install any. But when using the device with open chamber combustion, the room must have supply ventilation.
Usage liquefied gas prohibited in apartment buildings... Therefore, the device is connected only to the highway... In private houses use a gas convector bottled gas it is possible, provided that the cylinder is installed outdoors in a special metal cabinet.
Fuel consumption in gas heating equipment is considered economical. To calculate the gas consumption, the basic parameters are taken:
Based on these indicators, you can make a calculation. For example, a 4 kW heater (designed for 40 m 2 of area) will consume 0.44 m 3 of gas per hour of operation, and 10.56 m 3 per day. But, since the device does not work all the time, this figure will be much less.
Before installing the gas convector, it is necessary to study the requirements and recommendations for installation, which are described in the instructions for the device.
Before installing the gas convector, you need to choose a place for its placement. According to GOST, the unit must be mounted under a window. The main installation steps are described below.
Connection to the mains, as well as the repair of gas equipment, should be carried out only by specialists. If you are going to use a gas convector with a cylinder connection, then a special permit is not required. But still, it is better for the gas service workers to do it.
In conclusion, it can be said that the use of gas convection equipment can be a relatively simple and inexpensive solution to the heating problem for different types premises. Attracted by the fact that the installation of such equipment does not cause great difficulties (except for connecting the device to the mains).
Modern spectrum heating appliances very wide. One of these devices is a gas convector. Market heating systems saturated with gas convectors of various companies. In this article, we will take a closer look at the process of installing a gas convector.
Prices for gas convectors are formed depending on the manufacturer and the power of the device. The cost of the device is also influenced by its quality. Thus, a gas convector from one Ukrainian manufacturer, purchased last year for 900 hryvnia, has been functioning for a year without interruption. In total, there were two such devices in operation. One of them went out of order after having worked for 5 months. Further repair of the device turned out to be unprofitable. It was more expedient to buy a new gas convector than to repair the old one. The second such device worked for the entire heating season and was turned off. With the onset of the next heating season, it was not possible to start the device. Its renovation was also extremely unprofitable.
The same cannot be said about two Turkish-made gas convectors. These devices were purchased for 1000 and 1500 hryvnia (200 and 300 dollars at last year's exchange rate). Different in capacity, but from the same manufacturer, they have successfully worked the entire heating season, were turned off and re-commissioned with the onset of cold weather without any problems.
Thus, you see a striking difference in quality from different manufacturers.
Convectors differ from each other only in design and in the presence / absence of a fan, which, blowing over the combustion chamber, drives warm air faster.
Gas convectors vary in power. Power affects the volume of the heated room.
Natural gas is burned in a cast iron combustion chamber. The device has a combined inlet-outlet pipe. Through it, oxygen necessary for combustion enters the gas convector, and combustion products are released. For combustion, the device does not require an impressive chimney to provide draft.
So, having finished with the theoretical part, let's move on to practice and learn how to install a gas convector.
The convector has been installed, let's take care of the gas supply.
The result of the work should be a convector hanging on the wall, a chimney with a hood and a gas pipe laid and connected to the convector.
In the first hours of operation, it is allowed to have bad smell burning oil. The convector is new, the combustion chamber burns out. If the smell does not disappear for a long time, you should turn off the gas and carefully inspect the junction of the exhaust pipe with the convector outlet.
Attention: It is advisable to carry out all the above work by a specialist. After all self-installation convector will void your right to repair the appliance under warranty. In addition, the convector must be accepted by Gorgaz or another similar service. There should be a sidebar project. And all the necessary permits and conclusions of the commission for the acceptance of the device into operation.
However, with this knowledge, you will be able to control the installation process of the gas convector by the specialists of the operating office.
Warmth to your home.