Pellets are used as fuel - this is a form solid fuel In the form of granules made from pressed wood waste.
In the pellet boilers, Kiturami KRP is used on pellets by the 1st and 2nd category Ø 6-8 mm and 10-30 mm long.
For the first time for russian market Two models of the pellet boiler are supplied by KITURAMI KRP-20A in the basic configuration and in the premium package.
These models are designed specifically for work in the complex and harsh environments of Russian frosts.
IN basic configuration This boiler with a capacity of heating 24 kW to operating pressure up to 2.5 kg / cm 2, pellet burner, with a feeding mechanism PELLET, boiler control unit and a pellet bunker with a capacity of 160 kg (225 liters)! Heated area of \u200b\u200bpremises up to 300 m 2! Already in basic configuration, thanks to built-in turbulizers, temperature flue gases At the output does not exceed 110-115 0 s with any modes of boiler operation! And this provides high efficiency more than 92%! In addition, the details of the feeding mechanisms of the burner and the pellet feed screw are made of special sound-absorbing materials. Behind the door of the boiler room is not heard how the boiler works.
Pellet boiler Kiturami KRP in the package of premium Equipped with additional high-quality and reliable mechanisms. To protect the burner from the fire (when the inverse thrust occurs), it is planned to shut down the feed of the pellet to the burner (it is also in the basic configuration). To ensure maximum security to the shun mechanism, feeding pellets, added solenoid valve automatic fire safety. The burner grinding will be flooded with water when there is little possible reverse thrust through the burner. Due to the presence of turbulizers in the heat exchanger of the boiler the possibility of reverse thrust is very small, but the damage from the fire is so great that the presence of this valve is a huge plus of this boiler, which provides complete fire safety!
| Parameters | Model | KRP-20A. |
| Max. thermal power | 24.0 kW (20,640 kcal / hour) | |
| Hot water outlet | 25.0 kW (21,500 kcal / hour) | |
| Design heat exchanger | 3 phase | |
| Kpd. | 92,60% | |
| Type of air removal | Forced type of ventilation | |
| Sizes of the boiler with a bunker (w x d x in), mm | 1,420 x 1,350 x 1,280 | |
| Diameter granules | Ø6 - Ø8 mm, length up to 32mm | |
| Type of model | Heating and GVS. | |
| Maximum pressure in the heating circuit | Maximum 2.5 bar | |
| Maximum pressure in the DHW circuit | Maximum 6.0 Bar | |
| Water volume in the boiler, liters | 168 L. | |
| Heat exchanger thermal area, m 2 | 3.3 m 2. | |
| Temperature of flue gases | Up to 120 0 s | |
| Recommended Compressor Characteristics, Pressure, Tank Volume | 8 bar / 25 liters | |
| Method of ignition Pellet | Ceramic TEN. | |
| Input / output of the heating system | 25 A. | |
| Log in / out | 15 A. | |
| Chimney diameter, mm | Ø120 mm | |
| Weight of the boiler / bunker, kg | 210 kg / 20 kg | |
| Capacity of fuel in the bunker and its size, mm | 160 kg, 710x710x1180 (shXDX) | |
| Granule consumption | 5,53 kg / h | |
| Out of ash | Less than 1% (full combustion) | |
| Heated area (depending on the heat loss of the building) | From 66 to 300 m 2 | |
| Voltage / frequency | 220V / 50Hz. | |
| Power consumption for the operation of the burner, auger, ashountile (per hour) | Up to 50 W. | |
| Power consumption for ignition (ignition duration about 1 minute) / Ceramic Tan power | Up to 10 W / 400 W | |
news
20.06.2017
The warehouse received pellet burners of rotational type with a rotating combustion chamber - Kipi Rot Power. Burners are available in stock.
16 kW, 20 kW, 26 kW, 36 kW, 50 kW.
17.05.2017
We present a new household automatic chipping boiler - Bioten Agro Mini.
28.11.2016
New pellet boilers arrived Kiturami KRP-20PA and Kiturami KRP-50PA.
28.11.2016 Update ruler Bioten G-Eco. Even easier to maintain the boiler and even higher than the efficiency.
21.06.2015
The warehouse received pellet and solid fuel boilers Bioten with DHW circuit. The DHW circuit is made of copper pipe and significantly reduces the cost of organizing hot water supply. Also in the boilers of the new modification, a TEN is now installed, with which the boiler can operate on electrical energy.
20.04.2015
New price for pellet boiler Kiturami KRP-20A - 167500 rubles.
09.04.2015
Pellet boilers with burners entered the warehouse Moderator. Pellet burner Moderator with double automatic mechanical cleaning - Leader among pellet torches of flare type. Mechanical cleaning and grateproofing of the pellet burner and the piping space is made alternately by two automatic drives of Swiss production.
21.03.2015
Accepted orders for a pellet boiler Kiturami KRP-50A50 kW capacity. Cost of the boiler - 275000 rubles.
05.02.2015
New 2015 - Bioten Compact. - a compact boiler that may be installed even into the most small boiler room, while its technical characteristics are better than many pellet boilers of classical layouts.
01.10.2014
Those who want to increase the battery life of the boiler now have the opportunity to purchase a Kiturami KRP-20A pellet boiler with an enlarged bunker 420 L. (Standard bunker - 225 L.). Increased bunkers can be installed both on the left and on the right side of the boiler. Supplement for the boiler with an enlarged bunker is only 3000 rubles.
FROM 15.12.2013 Suitable pellet boiler Kiturmi KRP-20A can be found at work at our exhibition site in Lista and get advice.
Shares
FROM 08/31/2017 to 31.09.2017there is a special price for new boilers. Bioten Pellemax and Bioten Standard X.
FROM 02.02.2017 to 05/31/2017 Spring promotion is valid: we give you when buying any pellet boiler electric boiler With a capacity of 5 kW!
From 01.08.2015 to 08/31/2015
We give a bunker for pellets worth 14000 rub. Buyers of pellet boilers Bioten Compact C-24A
and Bioten Compact.
C-28A.
Accordingly, the total cost of the complex C-24A. decreases from 129000 rubles. up to 115,000 rubles, and C-28A. from 139000 rubles. up to 125,000 rubles .. also, when installing these boilers commissioning work cost 8000 rub. Produced for free. TOTAL, your total savings will be 22000 rubles.
From 01.07.2015 to 07/31/2015 Summer campaign is valid: when buying a pellet boiler Bioten Compact C-24Afor 129,000 rubles., Bioten Compact C-24KRP for 142,000 rubles, Bioten Compact C-28A for 139,000 rubles. Our experts will be delivered (3000 rubles), turn (1000 rubles), will be brought to the boiler room (1000 rubles), they will produce the basic installation of the boiler (20,000 rubles) and its commissioning (8000 rubles). General savings will be 33,000 rubles. Thus, a high-quality pellet boiler with a capacity of 24 kW with automatic cleaning burner will cost you only 98,000 rubles. Hurry up to take advantage of the favorable offer, since the number of boilers proposed on the stock is limited.
Before 15.10.2014 For residents of Moscow and the Moscow region there is a special price for a pellet boiler Kiturami KRP-20A - 129900 rubles.
Good news
In the near future boilers will come to the warehouse Bioten.rulers Pellemax.equipped with automatic pellet burner rotary type Kipi Rot Power with a rotating combustion chamber, as well as boilers ruler Standard X - Even more furnace, even more asolnik, even higher than the efficiency and even better quality combustion. At the same time, the price of a new boiler Bioten Standard X. will not be higher than on the ruler Standard..
In our company are provided special prices for large families and pensioners. You can find out the special price of a solid fuel or pellet boiler you need from our managers. Also special prices are valid for preferential groups of the population and when carrying out installation and commissioning.
Owners of pellet boilers Kiturami KRP-20A, Dragon KRP various modifications, as well as pellet burners Kiturami KRP-33, Which acquired equipment in the company by Kystems service during the heating season 2013-2014, can take advantage of our special offer and improve the consumer properties of their equipment by replacing the ignition of the ignition, the burner nozzle and the mounting plate for identical details of the new modification.
All items for replacement are provided by our service center. is free.
Fully free upgrades are made in the case when the user of the equipment itself brings the dismantled burner in service centerlocated g. Istra Mo.
When leaving experts, only transportation costs are paid by the company's service to the object.
Owners of pellet boilers in Kituri, Dragon and pellet burners by the people who purchased their equipment in Kituri service And they made it installation by the forces of our specialists, transportation costs are not paid.
We invite you to decently paid work of responsible installers of heating equipment with work experience, as well as invite the organization and brigade for installation to cooperate engineering systems At the objects of our customers.
Description
Pellet boiler Kiturami KRP-20A Premium - reliable and productive unit with a nominal capacity of 24 kW heating, intended for effective heating Premises with an area of \u200b\u200bup to 300 kV / m and for cooking hot water. This model It has a high level of automation, environmental friendliness and fire safety, which guarantees comfortable use throughout the service life.
The design of the Kiturami KRP-20A premium presents a pellet burner with a feeding mechanism, a boiler control unit and a pellet bunker with a capacity of 225 liters (about 160 kg pellets). On one boot, the boiler is capable of working up to 5 days, providing a high efficiency - 92%.
At the same time, all internal mechanisms of the pellet boiler Kiturami KRP-20A Premium work quite quiet, and the temperature of the flue gases at the output does not exceed 110-115, which allows you to place the unit in almost any convenient place and use in accurately according to your needs.
 |
 |
Like other recent generation, this configuration is characterized by an extended complete set and a high degree of automation, thanks to which the boiler is convenient and easy to use. Among the main advantages of this model:
Exceptional reliability I. high level Security - The burner of the Kiturami KRP-20A boiler Premium has a fire protection system. If the reverse thrust occurs, the feed of the pellet in the burner will be disconnected, and the burner grip will be covered with water. Overheating and low coolant sensors will avoid negative consequences.
Electronic room thermostat Allows you to control the temperature of water and air without constant location near the boiler - all the necessary parameters are displayed on the remote.
Built-in heat exchanger Stainless steel will allow to receive any desired hot water without the need to purchase and connect a boiler indirect heating.
Automatic pipe cleaning system The Kiturami KRP-20A heat exchanger Premium greatly simplifies the service of a pellet boiler.
Mechanical cleaning system burner Does not allow the appearance of so-called cakes (formed when using high-voltage pellets with a large sand content), which contributes to the rational consumption of fuel, maintaining a stable efficiency and reduces heating costs.
Built-in microprocessor It is capable of monitoring the temperature of the water in the Kiturami KRP-20A boiler Premium and the flow of air over the burner fan, providing optimal heating mode.
Proper operation and timely service are a guarantee that the acquired equipment will last for a long time and will cope with all the main tasks. Therefore, you need to spend quite a bit of time to check the performance of the Kiturami KRP-20A boiler Premium and carry out the necessary preparation before use:
Content Pellet boilers are becoming increasingly popular in the domestic market. Every year more and more models from various manufacturers from around the world appear. Today's review I would like to devote the products of the South Korean company Kiturami. From our review, you will learn from yourself the pellet boiler in the people, what are its advantages and what is the feature of his design. We also give reviews of the owners and tell me how much the heating device on the pellets of this brand in the Russian market.
Kiturami's many years is a recognized leader in production. heating equipment In South Korea. From the day of its foundation in 1962, they have developed a huge base of knowledge and technologies for the production of heating equipment of the highest quality. In addition, the company produces solid fuel heating devices on firewood and coal, as well as gas, diesel and combined models.
Photo 1: Appearance Boiler on Pellet Kiturami KRP-20A
Boilers on fuel granules are represented in the Russian market of the KRP series. In the lineup of only two models: KRP-20A with a capacity of 24 kW and KRP-50A with a capacity of 58 kW. In this article we will focus in detail on the younger model from this line. So let's get start.
Kiturami KRP-20A boiler is a double-circuit pellet boiler with a three-way heat exchanger. It is able to pull the room to 300 m2. In addition to standard blocks included in each typical pellet boiler, Kiturami KRP-20A included PREMIUM supplies are equipped with additional blocks that make it easier to use and make it more comfortable. Let's analyze his device:
Photo 2: The principle of operation of the boiler on fuel granules by the kituri Like any pellet boiler, KRP-20A is equipped with a bunker. The presence of the bunker is dictated by the need to store the reserve Pellet to ensure long burning boiler offline. The storage accommodates 150 kg of fuel pellets. This stock is enough for 7-8 days in spring-autumn time, and 3-4 days when used in winter. The height of the bunker 1.2 M allows you to comfortably replenish it without additional devices in the form of stairs, etc.
From the bottom of the cone-shaped bunker, fuel granules with a rigid screw rise to height, from where they are then rolled out in the burner. The size of a screw conveyor allows you to deliver pellets in general, avoiding them grinding during the delivery process. The smoothness and continent of the feed is carried out by a reliable electric motor.
The boiler is equipped with a torch type with ceramic ten. After the starting dose of fuel granules, the heater and the fan starts and the burner is ignition. The supply of air in the pellelet layer occurs on the helix, which allows you to evenly saturate the entire layer of fuel pellets with oxygen, thereby ensuring a high degree of burning.
The design of the heat exchanger is designed in such a way that allows the hot gases to three times through it, providing maximum heat supply inside the boiler.
The presence of the DHW circuit allows you to organize a hot water supply.
The mechanical drive automatically removes the sandy slag from the burner surface. This process is programmed and cyclically during the boiler operation.
The presence of a control unit allows you to install the boiler operation modes, as well as adjust the process of cleaning the burner and blowing the heat exchanger. The presence of the remote control allows you to control the work of the boiler remotely.
Photo 3: Fire extinguishing electromagnetic valve Below is a table with the main technical characteristics KRP-20A by Kituri:
More recently, a domestic competitor to the Russian market appeared on the Russian market.
Back to the categoryLike any other device, the Kiturami KRP Cotep has its own advantages and disadvantages. We will try to highlight the main advantages and disadvantages of this device. So, let's begin:
The main advantages of this model are:
Low cost is perhaps the main argument in favor of this model. The boiler costs almost 2 times cheaper than European analogues.
On average, the heating season is a duration of 7 months, for heating area of \u200b\u200b100 m2, the boiler consumes from 3.5 to 4 tons of pellets. This is a very good indicator among similar models of other manufacturers.
Thanks constructive features pellet boiler, the maximum heat unit occurs inside the boiler, as evidenced low temperature flue gases. The CPD at the same time reaches 92-94%.
Kiturami KRP-20A pellet boiler - double-circuit. The presence of a hot water loop allows you to save on an indirect heating boiler or an electrical meter. The boiler is able to produce sanitary hot water with a temperature of 60 ° C in the amount of 9 liters per minute.
At the end of the feed line, the pellets, at the burner entrance, to prevent fire from occurrence, a temperature sensor is installed. When the temperature in 95 s is exceeded, the solenoid valve and the combustion is powered by water from a special tank.
The volume of coolant in the heat exchanger of the pellet boiler by yoke is 160 liters. It is about 2 times more than that of similar models of other manufacturers. Due to the large volume, the negative impact of a cold return to the work of the boiler is eliminated. It also allows you to significantly reduce the time of heating the entire heating system.
To clean the surface of the heat exchanger from the ascended on it ash, soot and resins on it, the pellet boiler can be additionally equipped with a compressor. Cleaning is performed by air under pressure 8 atmospheres. The frequency of this process is controlled by the control unit. Depending on ash, the pellets, cleaning the boiler can be produced from once a week to once a month.
The presence of this device allows you to monitor and manage operation modes and set the parameters of the pellet boiler being on the removal from the boiler room.
Photo 4: Kiturami pellet burner The disadvantages of Kiturami KRP-20A include:
Like all varieties of pellet boilers Kiturami KRP-20A are energy-dependent. Power Supplies are necessary for the operation of the fan burner, screw engine, cleaning compressor, control unit and electric tan. However, the boiler consumes a slight amount of electricity. The biggest consumption creates an electric tan. In the ignition mode pellets, it consumes about 400 W, but this process takes 1-2 minutes 12 times a day.
The use of a torch of a flare type and pellet fuel of low quality leads to the formation of so-called corsi from slag on burner grain. They are imagined when high temperatures Pellet particles. This process interferes with the normal operation of a pellet boiler and leads to the emergence of soot, an increase in fuel consumption by 20-30%, and consequently a decrease in the efficiency heating device. To combat this phenomenon, the Kiturami KRP-20A model includes a block of mechanical cleaning of the grain from the drunk fuel pellets.
Photo 5: Portable boiler control unit In addition to the shortcomings listed above, there are minor shoals as an assembly. But this should be expected from the Korean manufacturer, after all it is not the European.
Kiturami KRP Pellet boilers for heating and hot water supply. Pellets are used as fuel - this is a form of solid fuel in the form of granules manufactured from pressed wood waste. In the pellet boilers, Kiturami KRP is used on pellets by the 1st and 2nd category D 6-8 mm and 10-30 mm long. For the first time for the Russian market, two models of the KRP-20A pellet boiler are supplied in the basic configuration and in the premium package. These models are designed specifically for work in the complex and harsh environments of Russian frosts. In the basic configuration, it is a capacity of heating 24 kW to operating pressure up to 2.5 kg / cm2, pellet burner, with a feeding mechanism PELLET, a boiler control unit and a hopper for pellets with a capacity of 160 kg (225 liters)! Heated area of \u200b\u200bpremises up to 300 m2! Already in the basic configuration, thanks to the built-in turbulizers, the temperature of the flue gases at the output does not exceed 110-115 degrees with any modes of the boiler! And this provides high efficiency more than 92%! In addition, the details of the feeding mechanisms of the burner and the pellet feed screw are made of special sound-absorbing materials. Behind the door of the boiler room is not heard how the boiler works.
Pellet boiler in the premium package is equipped with additional high-quality and reliable mechanisms. To protect the burner from the fire (when the inverse thrust occurs), it is planned to shut down the feed of the pellet to the burner (it is also in the basic configuration). To ensure maximum security to the shun mechanism of the pellets, the electromagnetic valve of automatic fire safety has been added. The burner grinding will be flooded with water when there is little possible reverse thrust through the burner. Due to the presence of turbulizers in the heat exchanger of the boiler the possibility of reverse thrust is very small, but the damage from the fire is so great that the presence of this valve is a huge plus of this boiler, which provides complete fire safety!
1 These models are designed specifically for work in the complex and harsh conditions of Russian frosts. In the basic configuration, it is a boiler with a capacity of 24 kW to operating pressure to 2.5 kg / cm2, a pellet burner, calculated on pellets 6-8mm with a feeding mechanism PELLET, the control unit of the boiler and the bunker for pellets with a capacity of 160 kg (225 liters)! Heated area of \u200b\u200bpremises up to 300 m2! Already in the basic configuration, thanks to the built-in turbulizers, the temperature of the flue gases at the output does not exceed 110-115 degrees with any modes of the boiler! And this provides high efficiency more than 92%! In addition, the details of the feeding mechanisms of the burner and the pellet feed screw are made of special sound-absorbing materials. Behind the door of the boiler room is not heard how the boiler works.
2 Pellet boiler in the premium equipment is equipped with additional high-quality and reliable mechanisms. For the protection of the burner from the fire (when there is a reverse thrust), it is shut off the feed of the pellet in the burner (it is also in the basic configuration). To ensure maximum security to the shun mechanism of the pellets, the electromagnetic valve of automatic fire safety has been added. The burner grinding will be flooded with water when there is little possible reverse thrust through the burner. Due to the presence of turbulizers in the heat exchanger of the boiler the possibility of reverse thrust is very small, but the damage from the fire is so great that the presence of this valve is a huge plus of this boiler, which provides complete fire safety!
3 For ease of water control in the boiler and air temperature, an electronic room temperature regulator has been added. There is no need to listen to the boiler operation or descend into the boiler house every hour - all the necessary parameters of the boiler operation are reflected on this remote. Added modes of operation with a long lack of people in the house, the provision of hot water supply, the timer operation mode.
4 Integrated hot water supply heat exchanger from stainless steel does not require additional costs of purchasing an electric boiler, which also reduces the cost of users to the production of hot water. The heat exchanger is made of pipes with a diameter of 15mm, which eliminates the risk of their overgrowth by scale with long work. The presence of stainless steel heat exchanger in the high-temperature part of the boiler provides a consumer with a large amount of hot water in winter and summer.
5 minimum weekly boiler service is possible if there is automatic pneumatic cleaning of the surfaces of the heat exchanger in this boiler. This is generally an amazing system. 8 atm pressure allow you to avoid the appearance of soot, soot and resin on the walls of the heat exchanger!
6 To reduce the time of servicing the boiler, a unique system of automatic cleaning surface of the burner grinding surface is added! The quality of the pellets is connected today a lot of problems. The main problem is the formation of peellet and non-limited garbage particles in them. They are called cakes that interfere with their normal burning in burners, increase fuel consumption by 20-30%, add soot, soot and resin to the boiler, thereby reduce the efficiency of the boiler. The mechanical cleaning system of the burner does not allow the appearance of cores, the maximum reduces the cost of heating. The automatic gold system complies with the highest environmental requirements.
7 Thanks to the structure of turbo-cyclone burning and a special design of the burner, a secondary survival of combustion products in the boiler heat exchanger is ensured.
8 The built-in microprocessor control device periodically controls the temperature of the water in the boiler and the flow of air through the burner fan, providing the optimal heating mode. The optimal and balanced feed supply of the primary and secondary air flow in the burner provides full combustion of pellets.
9 The exact ratio of the operation of the burner and the circulation pump ensures the absence of condensate on the walls of the heat exchanger!
10 Pellet bunker with a capacity of 160kg has a small height and is convenient for its filling.
11 Availability of water overheating sensor in a boiler, water temperature sensor in a boiler, low-level sensor, water freezing sensor in the boiler, a burner temperature sensor, a set of protective devices from the opposite fire makes a pellet boiler in katuras reliable and secure.
