Electric heating equipment of the "Proterm" company is one of the most popular devices designed to maintain a comfortable temperature regime premises. Thanks to high level quality and long operating time of heating electric boilers Proterm occupy a leading position. Overview heating equipment read Proterm brands.
Electric boilers Proterm are lightweight - 34 kg, subdivided into double-circuit and single-circuit heating devices. In addition, electrical equipment of this type has a rather compact size, thanks to which it can be installed in almost any comfortable place in the house. All boilers have the following characteristics:
Are in special demand among the population heating boilers wipe the slope. These boilers are provided in six power modifications:
All presented models refer to heating electric double-circuit boilers and operate on a voltage of 220/380 V. Models of this type are intended not only for heating a room from 40 sq.m., but also for heating liquid.
In order for the Proterm electric boiler to function correctly, it must be connected correctly. Tips for connecting heating electric boilers:
__
Use the heating boiler Proterm electric type for space heating for various purposes not so difficult, because the regulation and control system of an electric boiler is quite simple. To enter heater in working condition, it is necessary to perform a number of simple actions:
In the global market for heating equipment, Protherm products are popular, due to their reliability and high quality. Its equipment is supplied to many countries for corporate and private clients. The consumer can easily select heating equipment, because the lineup reaches almost 100 positions, including:
In the line of heating equipment of the PROTHERM brand, the line of electric boilers for heating is represented by the Skat series. The company has created a wide network of service centers that ensure the uninterrupted operation of the company's heating equipment adapted to the conditions of Russia. Therefore, it is profitable to buy an electric boiler Proterm Skat due to the presence of a network service... The official website of the company presents the Protherm product catalog for 2016. It contains the most current information about the heating units produced by the company.
In the company's catalog for 2016, the wall-mounted electric boiler Protherm Skat is represented by 8 models with powers from 6 kW to 28 kW. Equipment with the letter "K" is connected to a 220/380 V network. All models of this line of electric boilers are double-circuit. The company also produces a line of models of single-circuit boilers in their name there is an abbreviation - "KR 13". Single-circuit boilers are produced in the same power range as double-circuit ones. The dimensions and weight of all models are the same and their main difference is the power, depending on the set installed heating elements and supply voltage (220/380 V).
The catalog provides basic parameters for an electric heating boiler Protherm of the basic model:
Unlike gas, solid fuel and diesel heating boilers, they do not emit any harmful products, they do not need a chimney and various additional devices.
By its properties, the Protherm electric boiler is absolutely harmless to environment, and does not require constant monitoring during operation.
So, the Protherm Skat 9k electric boiler, however, like the rest of the company's line of electric boilers, is fully automated, an LCD display is installed on the front surface of the case, which reflects the set readings. The package includes detailed instructions to the electric boiler Proterm Skat 9, where all actions are indicated to achieve the coordinated operation of the unit.
It is enough for the owner to set the desired temperature, and in the future it will be maintained by the automation, with high accuracy up to one degree. After reaching a comfortable temperature, the thermostat will send a signal to the boiler control unit, which will turn off the power supply. Electric boilers are safe, because the automation monitors not only the temperature of the coolant, but also its pressure. To prevent sudden voltage surges, the boiler reaches the maximum mode in steps. A double-circuit electric boiler Skat of any model, in addition to heating, heats water for a hot water supply system (DHW).
Electric heating boilers are extremely compact and fit perfectly into any interior. Wall-mounted electric boilers Proterm Skat can heat areas from 60 to 280 m2 and are perfect for heating apartments, country houses, summer cottages and offices. Especially good feedback for the electric boiler Proterm Skat 6 kW, which can provide a small office with heat and hot water... There is an example when the owner installed a remote tank, the water in which heats up at night, since the night tariff is in effect in the region, and in the daytime it gives off heat to the room.
The installation and assembly instructions for the unit included in the delivery of Protherm electric boilers contain a warning that in the event of mechanical damage the body, violations of the integrity of the components and blocks of the boiler, the warranty becomes invalid. Therefore, at self-assembly you need to work carefully and clearly follow the recommendations. In order for the wall-mounted double-circuit electric boiler Proterm to function correctly, it must be connected in accordance with the requirements of the instructions.
The boiler with a rated power of 6 kW is available in two variants for connecting heating elements for 220 V and 380 V. Boilers and heating elements are no different and the 380 V boiler version can be easily turned into a 220 V version. To do this, it is enough to change the switching scheme. If the boiler is connected to a three-phase network, then heating elements for 2 kW in each phase consume a current of about 10 A, since the line voltage is 220 V. Therefore, a 1.5 square wiring and a 10 A three-phase circuit breaker will ensure normal operation.
With a single-phase network, everything is somewhat more complicated. The boiler has 6 heating elements and at a maximum power of 6 kW, the consumption current will be slightly more than 27 A, therefore, you will need a wire with a cross section of at least 6 squares and a 30 A circuit breaker. All of the above applies to any electric heating boiler for a house, of any power , only the values of the consumed current and the required cross-section of wires will depend on the power.
According to the tables for section selection copper wire a current of 1 A requires a cross section of 0.17 mm2. The current in the circuit is determined by the well-known formula - I = P / U, in which:
The first thing that you need to pay special attention to is the correct selection of the section electrical cable nutrition. Indeed, for example, an electric boiler Proterm Skat 24 with a rated power of 24 kW, when connected to a three-phase network, will consume a current of about 30 A for each phase. It is undesirable to connect such a powerful boiler to a single-phase network, because in this case, the current at maximum power will increase to 100 A. You need to connect an electric boiler only through an RCD.
As for the installation site, the requirements for the installation of electric boilers are not as stringent as for gas or solid fuel units. And the price of an electric boiler for heating a house is much lower than the price of other types of boilers.
You can install an electric boiler anywhere, but this place should provide easy access for adjusting the unit or promptly shutting down if necessary.
If several electric boilers are provided in the circuit diagram, then they are connected in parallel. According to the rules for electrical safety, the electric heater must be grounded.
All are compact, easy to operate and safe. They do not need chimneys and special rooms for installation, and the efficiency is close to 100%. These properties are superior to other types of boilers. For heating a specific room, an electric boiler is selected primarily in terms of power. It is believed that one kilowatt is sufficient to heat 10 m2. Therefore, the electric boiler Proterm Skat 12 with a nominal power of 12 kW can provide heat to a room with a total area of 120 m2.
The high quality and reliability are confirmed by the reviews found on the network on the Proterm Skat 12 electric boiler, in which they write that the boiler is silent, simple and easy to regulate and does not require constant attention ("installed, turned on and forgotten").
For connection as a backup to an existing heating system or for heating small house with an area of up to 90 m2, the wall-mounted electric boiler Protherm Skat 9 kr 13 with the possibility of using a 220/380 V network is in greatest demand. Single-circuit boiler with electronic control and with built-in circulation pump and . Its main characteristics are fully consistent with the base model.
If there is a need to organize hot water supply, then the manufacturer has provided for the possibility of connecting an external tank. At the time of sale, the connection nipples are closed with plugs. The difference in price between single-circuit and double-circuit boilers small. For example, the price of a Proterm Skat 9 kW wall-mounted double-circuit boiler is comparable to the price of a boiler of similar power, but single-circuit. In different stores selling heating equipment, the price of an electric boiler Proterm Skat 9 ranges from $ 490 to $ 560.
According to their technical specifications, according to the requirements for installation, regulation and design, electric boilers are much preferable to gas and. For their installation, a separate room is not required, and the electric boiler itself can be installed anywhere in the heating circuit, the main thing is that there is free access to it. Electronics, developed by Protherm, independently monitors the air temperature in the room and creates comfort and coziness at home. The only obstacle that limits the use of electric boilers is the high price of electricity, which tends to increase.
Heating equipment is necessary to ensure the comfort in the premises. Electric heating boilers Protherm stand out for their high quality and long service life among competitors.
Protherm is a popular European manufacturer of heating equipment. In the heat engineering market, the company has declared itself as a manufacturer of high quality boilers.
Branches and service centres Protherm is available on all continents. The range of the company - more than 100 models of boiler units, designed for all classes of consumers, associated heating equipment and components. The manufacturer's innovation is condensing boilers.
A distinctive feature of Protherm is the availability of services throughout the country. Service is carried out both by our own craftsmen and with the involvement of craftsmen from partner companies.
By installation method:
All models of boiler equipment Proterm consist of the main units:
Important! The pump is built into the boiler drum. All connections and adjustments were made by the manufacturer and therefore also covered by the manufacturer's warranty.
Automation and instrumentation are designed to monitor and prevent emergencies during the operation of boiler equipment Proterm.
Equithermal temperature measurement function saves energy consumption depending on weather conditions: on warm days the boiler operates at minimum power, on cold days at maximum load.
Electronics composition:
Important! When self-mounting the equipment, damage to the case is frequent, which can lead to a breach of warranty obligations on the part of the consumer.
For the device to work correctly, you need to configure it correctly:
As a separate segment, Protherm presented single-circuit electric boilers. The Skat series is designed for heating and hot water supply residential buildings and administrative buildings in the absence of gas supply. Wall installation.
The models are available with a rated power from 6 to 28 kW with the ability to connect measuring instruments (thermostat and pressure gauge) and voltage stabilizers.
The advantages of the line:
Important! All models of the Skat line are equipped with displays and a convenient control panel, a soft start and pump run-down function.
Models at a glance
Important! High capacity Protherm boilers can be installed in parallel.
The cost of Protherm products depends on the specific model and equipment selected, availability, type and duration of the warranty. Low-power models can be purchased from 10,000 rubles, the cost of high-performance boilers reaches several hundred thousand rubles.
Electric boilers of the Skat line of the Protherm company - the best solution for heating and hot water supply of residential and office buildings, where it is difficult or absent to connect to the gas supply system.
High efficiency and low energy consumption fully pays for the cost of equipment and installation over several heating seasons.