In building markets today, thermal insulation materials are presented in a wide range. True, most of them have very impressive dimensions. How to be if you want to make the room warm without losing neither centimeter of useful quadrature? In this you will help the thermal insulation of corundum. This superctic suspension on appearance no different from ordinary acrylic paint. However, its use is highly efficient and helps reliably insulate the surfaces of various types. The popularity of liquid ceramic thermal insulation of the Corundum series is substantiated relatively low cost and a number of undeniable advantages.
The action of the suspension is directed to the removal of condensate formed on the walls and pipes. It consists of catalysts and clamps, special anti-corrosion additives, as well as a binding base made of high-quality acrylic. In addition, the thermal insulation material Corundum includes a ceramics microsphere with discharged air. The multicomponent composition is homogeneous and easily applied to any surface.
The technical characteristics of ceramic liquid insulation involve the operational temperature range from -65 to +260 ° C. The composition has ultra low vapor permeability and hygroscopicity. It can be applied to most finishing and facade materials: concrete, metal, brick and plastic.
The thermal insulation coating of corundum helps reduce heat loss and reliably protects the surface from moisture, environmental impact and temperature differences.
It is important to pay attention to the characteristics of the suspension as energy efficiency. By description, the thermal insulation is an ultra-thin corundum with a layer of coating 1 mm thickness significantly exceeds any rolled or leaf insulation with a cross-sectional size of 50-70 mm or single brickwork.
The range in the construction markets and in specialized stores is presented in several versions. Overview of the line of thermal insulation polymer coatings Corundum consists of the following materials:
1. Classic - Liquid substance is ideal for roofing and facade works. It is successfully used for interior decoration. We are talking about the insulation of the walls of residential premises and the buildings of general purpose. And the Corundum Classic is highly effective in thermal insulation of pipelines of cold and hot water supply, concrete and bulk floors, slopes of windows.
2. Anticorrosive can be applied directly on a rust-covered surface. It has high adhesion to metal or concrete, since it is able to create a reliable protective layer. Buy Corundum Antikor is appropriate only for applying the first base layer. For the rest, the use of the heat insulation of a classic type is allowed.
3. Winter - the species is designed specifically for work in the cold season. It can be applied to any, even a metal surface at temperatures up to -10 ° C. This thermal insulation can be called the "heat mirror" effect. It significantly reduces heat loss and reflects the streams of heated air.
4. The facade is suitable for processing concrete surfaces, as well as buildings built from foam or slag blocks. It is applied with a thick layer, which allows to significantly reduce labor costs when processing the walls of a large area. Ultrathine thermal insulation Corundum facade is ideal for finish finish.
Advantages and disadvantages
Isolation has a number of indisputable advantages:
There are practically no shortcomings. The only thing that should be noted is the absence of long-term tests confirming that all applicable by the manufacturer specifications correspond to reality.
Method of use
The surface should be cleaned of dirt and degrease. According to the instructions, the corundum is applied in layers. To do this, you can use a brush, roller or spacing. Remember that the thickness of one layer should not exceed 0.3-0.5 mm. The period of complete drying is 24 hours. In extreme cases it is allowed to cut to 18. Only after this time the following layer can be applied.
Cost in Moscow
"I bought the material in order to insulate the trailer in which builders lived in the facility. According to reviews, the thermal insulation properties of Corunda approached me perfectly. However, the thermal conductivity was noticed in them, and in the technical characteristics of the thermal conductivity. And so isolation fully justified itself. It is ideal for those who want to save space when insulation. "
During the construction of houses, special attention is paid to thermal insulation. In the conditions of cold winters of our country such additional protection It will be very useful. Warming will allow to significantly save on heating and increase the comfort of living in the house. There are many thermal insulation materials on the modern construction market. Everyone has its pros and cons, and sometimes it is very difficult to make a choice. To not be mistaken, it is better to learn more about the characteristics of each. In this article, we will talk about such a material as liquid thermal insulation of corundum. There will be data to its characteristics and talk about the advantages and disadvantages.
Corundum thermal insulation has recently become very popular. This is a modern method using special Ceramic Teplokras. Externally, such a material is not much different from ordinary paint. All the most important is hidden inside.
Liquid thermal insulation Corundum is made of a mixture of aqueous-acrylic solution and ceramic fillers. The first component allows the material to evenly distribute the heat insulating elements over the entire surface. And the hollow ceramic spheres of microscopic sizes perform the role of the heat insulating element.
Due to its composition, the thermal insulation of the corundum is performed quickly and evenly covers the entire area, even in the most hidden areas.
can be carried out on any surfaces. The heatcharak is perfectly held on concrete, brick or masonry, plastic or metal structures.
This material easily withstands a large temperature range. Liquid thermal insulation "Corundum" does not lose its characteristics both with a strong cold (up to -65 degrees) and with severe heating (easily withstands the temperature to +260 degrees).
Possessing low thermal conductivity, even a thin layer of material perfectly holds heat. The thermal insulation of the corundum thickness in just 2 mm works more efficiently than the layer mineral Wat. 60 mm thick.
Maintenance specifications Liquid thermal insulation material Corundum is the following:
All these characteristics make corundum better thermal insulation material.
Liquid thermal insulation corundum is modern high-tech material. E.if we talk about its advantages, then it is worth noting the following:
But this material has its own minuses. So relate to them high cost Heat insulator Corundum. In addition, the material is new, so all his stated characteristics have not yet received their practical confirmation.
Liquid thermal insulation material Corundum available in several options. The manufacturer offers to purchase the following varieties:
There are also a number of other types of liquid thermal insulation material, but they are used less often. But whatever brand Corunda you use, the high thermal insulation properties of the coating are provided.
Whatever the variety of liquid thermal insulation of corundum you use, before applying it must be properly prepare a base. First of all, the entire surface is cleared of garbage and pollutants. Personal sections, "cement milk", and an old molar coating are removed. If there are gaps and cracks, they are close to sandy cement mortar. Then any surface should be treated with an abrasive circle or a simple metal brush.
The paint itself for thermal insulation must be mixed according to the supplied instructions from the manufacturer. The most important thing is to mix manually. If you use a mechanical method, then ceramic microspheres may be damaged and the thermal insulation effect will deteriorate.
Heatcharaska itself is applied manually or with painting devices. You just perform painting of the surface. When working there is no need for respiratory protective devices or forced air intake. Corundum is absolutely safe for humans.
Corundum thermal insulation is a modern, high-tech. With it, you can effectively insulate houses and any other facilities. Therefore, despite the rather high price, corundum enjoy great popularityas among construction companiesand among private homeowners. And the ease of use allows you to cope with the insulation of anyone, not even having experience to the user.
Heat insulation paint Corundum facade It was created specifically for the construction sphere and is used for ultra-low thermal insulation of plastered, concrete, brick, wooden and other surfaces of the enclosing structures of buildings and structures. High-thin thermal insulation Corundum facade has high adhesion to almost all known materials, and low fluidity, thixotropy on any types of construction surfaces and high vapor permeability allows the coating with a layer to 1 mm.
Prepare the surface to apply material: remove loose areas, separating cracks, remove Olter inclusions, Clear concrete from cement "milk", repair the surface, including intergrinary seams to reduce the consumption of material and recess deeper than 5-7 mm, cement-plastering compositions. Singing the surface is performed using a sandblasting machine, a metal brush or abrasive circles for removing a gloss on the surface and removal of hopping and sprinkling structural elements.
After machining surface, careful dedusting should be carried out with brushes or blowers. After dusting the surface, it is necessary to rinse with water to remove dirt remaining dust, etc. Wait for complete drying. Concrete, brick and similar surfaces are predetermined to be primed by primer deep penetration of yachon. In the case, it is necessary to apply coatings of corundum facade on metal surfaces - metal must be pre-protected from corrosion.
It is recommended to pre-apply 1-2 layers (0.5 mm each), depending on the state of the metal surface, the modification of corundum anticornel. The humidity of concrete when applying corundum facade should not exceed 4%, air humidity during application should not be above 80%. If there are oily and fat spots on the surface - they must be removed using a solvent.
Corundum facade is ready for use, it must be mixed, if necessary, adding a bit of distilled water, immediately before applying to a pre-prepared surface. The amount of water also depends on the temperature of the base of application and subsequent operation. When applied to the surface with a temperature of + 7 ° C to + 80 ° C, the amount of water added to the material can be no more than 5% when the brush is applied and no more than 3% when applied mechanically (airless spraying apparatus). When applied on the surface with a temperature of above +80 ° C, it is necessary to pre-shoot down the temperature by applying several primer layers of the corundum of the facade, diluted 40-50% distilled water according to the scheme (see coating). With a large storage period inside the container, bundle on the fraction is allowed.
It is impossible to mix it too much!When using a drill with a paddle nozzle or mixer - the maximum allowable mixing speed - 100 rpm. Excess rotation speed will result in the destruction of the microsphere and a radical decrease in (or cancellation) of the effectiveness of the thermal insulation coating. Using vertical movements of the blades so as to immerse the thickened part into the liquid, turn on the drill and slowly start rotating the blade, mixing the bunches with the liquid.
Stir until the product does not look like cream. Approximate stirring time:
If there is a challenge to eliminate condensate, "fur coats", fungus, mold - the material is applied with minimal water adding, with a maximum interlayer interval (over 24 hours).
Working with corundum facade is recommended for a soft tassel with a long natural bristle or airless sprayer. Apply the coating on small surfaces or areas with a complex configuration using a soft brush. Surface surfaces from 100 m2 can be processed with an airless sprayer with a pressure pressure on the outlet of the nozzle 60-80 bar
Important: Not all airless sprayers are suitable for working with paint corundum facade!
It is possible to apply the insulating coating to the surface with a temperature of + 7 ° C to + 120ºС. It is impossible to work in wet weather, because The material is diluted with water, and it will not dry. The term of complete drying of one coating layer 1 mm thick is at least 24 hours. You can apply the next layer only after completely drying the previous layer - after 24 hours at a temperature not lower than + 7 ° C during the whole drying. A layer of about 1 mm is obtained about three-five "passages" of the sprayer, brushes. The application of the material is unacceptable, as it leads to the formation of a moisture-proof film on its surface, which in turn prevents the full evaporation of moisture in it, which will cause angularity physical properties and deformation of the coating.
When applying the material to the surface with a temperature of above + 80 ° C, the material boils and is very quickly "grasped", so the material must be diluted with water. It is recommended to progress the surface 40-50% aqueous solution material. When applying corundum, the facade on the surface with the temperature above +80 ° C thickness of the maximum layer in 24 hours should not exceed 0.5 mm! The hotter surface of the application, the stronger the material is diluted. The diluted material is applied by fast short movements, with this application, the layer will be very thin. Drying time of each such layer at least 1 hour. Such layers are applied until the material becomes shifted to boil on the surface. After that, give dry 24 hours. Then the material is applied according to the usual scheme - with the addition of from 3% to 5% distilled water with layers up to 1 mm with interlayer drying 24 hours. 1 mm layer thickness can be determined by the thickness gauge of the type "painting comb", the consumption of material 1.1 l per 1 m2 (approximate consumption when coating with a brush on smooth surface) or the thickness of the "optical density" of the material (so that through the material does not transluce the shipment). The material consumption affects the type of surface and the method of application. The total thickness of the coating and the number of layers is determined by the heat engineering calculation.
Under normal conditions, the product is safe. If the room is well ventilated or work is carried out outdoors - respirators are not required. Indoor without ventilation - use standard respirators. To protect the eye, apply safety glasses. To protect the skin, apply gloves and protective clothing.
If the product gets into the eyes - rinse the eyes immediately in running water for 15 minutes. If irritation persists - consult with your doctor. If you get on the skin - rinse with water with soap.
The product in liquid state does not flammify. In the fire of structures or structures on which the coating was applied, when heating, use water, foam, dry chemical preparations and carbon dioxide. In the case of the product of the product, use any imbuilt material of the type of sand, soil, etc.
Corundic storage The facade is carried out in a tightly closed container at a temperature of +5 ° C to +30 ° C, air humidity is not more than 80%, away from direct sunlight. Transportation is carried out by any type of transport at temperatures above +5 ° C in gave from direct sunlight. Cargo packaging for transportation should ensure that the containers and the safety of the container are correct. Violation of the integrity of Tara entails the material damage.
Yaroslavl LKM plant Specialmal sells wholesale paint-thermal insulator Corundum facade, the price is competitive, buy this ultra-thin thermal insulation is actually beneficial. We guarantee high quality paint, supplies are conducted anywhere in Russia and the CIS countries. Details at factory managers.
You can make a preliminary order for the delivery of the amount of thermal insulation paint for the facades in Russia and to the CIS countries directly on the site. Either call the plane managers by phone 8-800-775-07-61 (free call in Russia)- You will be consulted on all issues.
Heat insulating liquid material Production of corundum, based on its physical properties and consistency, is very similar to the usual white paint, which is painted standard surfaces. Thermal insulation Corundum reviews only positive. All this is due to the fact that the material consists of a high-quality acrylo-binder component, ultrathine ceramic microspheres with the composition of discharged air and a specially designed composition of clamps and catalysts.
In the production of such materials, special additives are also used fully excluding in conditions. high humidity The emergence of corrosion and fungal savings. Thanks to this composition, liquid thermal insulation Corundum (reading on our website) is obtained flexible, soft, light and tensile.
After applying, the insulation forms an elastic polymer trim having unique properties in comparison with.
The material of the new generation has already managed to prove its reliability as a component of the conservation of temperature. In addition, Corundum thermal insulation specifications is favorable to combat corrosion and condensate on cold surfaces.
The thermal insulation products of the company Corundum has several varieties:
Universal material applied directly to the rusty surface. Before applying it is enough just to walk along the surface with a regular metal brush to remove the dry layer of rust.
The insulation has an additional anti-corrosion property. Due to this, the costs of preparing the treated surfaces are significantly reduced.
It is an ultra-thin material with good thermophysical indicators. During transport, the liquid composition of the insulation is practically divided into fractions.
This type of material is applied by layers (thickness from 1 mm), therefore it looks like. The facade of paint Thermal insulation feedback from buyers is also only positive. This ultra-thin liquid thermal insulator is used for concrete surfaces.
Excellent feedback Paint Facade also received in sharing with paint anticorros.
The essence of thermal insulation materials of the liquid-ceramic structure of Corundum is the needs of those areas where it is extremely necessary to save and saving heat inside structures. Thermal insulation paint Corundum (characteristics), the temperature of which implies use in the territory different countries (Russia, Belarus, Ukraine, Kazakhstan, South Korea, in Asia and the European Union), has high elasticity.
Corundum materials are widely used in, inland walls, roofs, concrete floors, slopes of windows, cold pipelines and hot water, steam pipelines, cooling systems.
Liquid thermal insulation Corundum, the reviews of which they say that it can also be used for the insulation of refrigerators, trailers, tanks and other capacities.
The temperature mode of the use of materials is from +250 ° C to -60 o C.
The main technical indicators of the paint heat-insulating (reviews) has the following:
The main advantage that has thermal insulation paint Corundum: characteristics, heating temperature.
You can work with liquid thermal insulation paint without additional ventilation. Compared to other thermal insulation materials (rough and rigid), liquid paints are applied much faster and easier.
In addition, the thin liquid layer of insulation by weight is much easier, for example, thick-walled material.
What is a corundum insulation, as it is produced, what kind of varieties exist, the technical characteristics of the material, the advantages and disadvantages, the features of applying with their own hands.
Microspheres are in size within 0.01-0.5 millimeters. Also in the drug additionally introduced various additives, which are designed to strengthen it or other qualities. Such a balanced composition gives the material lightness, elasticity, flexibility and extensibility. In addition, Corundum has excellent adhesion ability.
By consistency, the liquid ceramic heat insulator is similar to the usual paint. In fact, this suspension of white, which, after polymerization, forms an elastic and durable polymer coating.
Unlike conventional thermal insulation materials, corundum not only well protects the building or any other design from heat loss, but does not give metal surfaces rust.
Initially, such ceramic heat shielding coatings were created by order of NASA for use on spacecraft. After some time, they managed to adapt these formulations under the "earthly" needs. Corundum is a trade name of the product developed by Russian scientists. This thermal insulator has all the necessary certificates confirming its quality.
Consider the main characteristics of thermal insulation Corundum:
Also among the disadvantages, it is possible to distinguish the rapid pouring of the material. Therefore, it is necessary to work with it quickly.
The optimal state of the insulation Corundum is a paste-like suspension of white. Standard packaging - plastic buckets of different volumes. The package must contain data on the manufacturer.
The price of thermal insulation Corundum may differ depending on the variety of material and the place of sale. On average in Russia, the cost of liquid ceramic insulation is this:
The average thickness of one layer should be about 0.4 mm. Each subsequent layer should be applied only after complete drying of the previous one. When working with a roller or brush, the average material consumption is about 0.5 liters per square meter.
We apply the thermal insulation of corundum, following such instructions:
Watch video Overview Corunda: