As you know, to stick new wallpapers on the walls, you will not need a lot of time. The only thing that this process is not strongly delayed, you need to quickly get rid of the old coating.
Often, domestic masters have doubts if you need to skip the old finishing materialIf it is well held on the walls. However, there are several reasons for which it must be done.
Here are the main of them:
So, cleaning walls from the old material is a mandatory operation. However, it will not take a lot of time and strength, as everyone can quickly contempt wallpaper from the wall house masterWhat are you next see for yourself.
Often, the dilapidated coating is kept what is called, on an honest word. In this case, it can be removed with your own hands. To do this, only you need to pry a spatula or other sharp items to the edge of a canvase and pull to the side.
Perhaps one jerk will be able to remove the whole cloth. In those places where the material keeps well, you should use a sharp tool.
If you can disrupt the canvas with your hands, it will help in this case water.
The instruction looks like this:
Note!
Before moisten the walls with water, it is necessary to turn off the electricity so that the water does not block the contacts of the wires that are under voltage.
In the photo - needle roller
Progress, of course, does not stand still. Therefore, special has appeared on the construction market. chemicals To remove old wallpaper. It must be said that their price is quite affordable, so this option should also be considered.
The means is applied using a sponge or ordinary roller. Liquid is not toxic, but at the same time it absorbs much faster into the coating structure than water. After the canvas are impregnated with the composition, they are easy to tear up.
Another effective way to easily contempt the old wallpaper is to use steam. Of course, the steam generator can cope with this task. However, this installation is far from all.
Therefore, it is possible to create steam by handicrafts. The easiest way is to show a wet rag to the wall and stroke it with an iron. It is even better if the iron has a vertical evaporation function. In this case, the process will occur faster.
Sometimes there are situations when the coating does not turn out from the walls to any of the above methods. In this case, more radical measures must be taken, for example, use the grinding machine with a coarse-grained nozzle.
Of course, this method is quite dirty and dusty, moreover, there is a high probability to spoil the wall surface. However, the other efficient way There is no quick removal of old finish in this case. The single, grinding machine can be used not for all walls, but only for those areas that cannot be considered in another way.
Note!
When working with a grinding machine must be protected airways respirator.
Here, perhaps, all major ways how to contemplate wallpapers from the wall.
It must be said that the preparation of the surface to sticking a new material on this is not completed.
In addition to removing wallpaper, you still need to perform some other actions:
After that, you can proceed directly to the blending of wallpaper.
Before you bleach new wallpapers you need to prepare the walls. To tear off the old wallpaper is not easy and dirty. But it is necessary to do this, even if there is confidence that they are very firmly glued to the wall. Under them can hide anything, for example, bacteria and mold, which will damage not only new wallpaper, but also the health of people who will be in the room. Another reason to contempt the old coating can serve that when sticking on them, the new old will swell, and they can start releasing and create unpleasant folds on the new canvase. All shortcomings and impairment of the lower layer - irregularities, saved joints, stains and dirt.
After the old wallpapers are proprietary wall wallpapers, it is necessary to stripped under the putty, align them with a putty, primarily appropriate for new wallpapers.
You will need the following tools to face old wallpapers:
Important! Before work, the electricity indoors must be disconnected. Isolate sockets and switches.
Floor floor with polyethylene film or cardboard, so as not to spoil the floor coating.
Preferably - cardboard, as it is not slippery and less traumatic.
The furniture remaining in the room is carefully closed from possible penetration of dust, dirt and water. You can take a polyethylene construction film for this.
At the exit from the room it is better to lay a wet rag so as not to spread the dirt on.
The walls are thoroughly rolled with a needle roller or scratched with a special device called "Oboy Tiger". It is done to disrupt the integrity of the surface layer of wallpaper for better moisture penetration. This stage is especially important if the wall coating was moisture-resistant. The wallpaper tiger looks like this:
The wallpaper canvas are carefully soaked with water or a special solution for removing wallpaper. To do this, you will need a bucket and a sponge. Instead of a sponge, you can use a rag, a foam roller or a pulverizer.
Note!Wallpaper and glue under them should have a moisture, but make sure that the water does not flow on the floor. Start moving the old canvas you need ten minutes, until the wall dried.
The special composition consists of surfactants (surfactants), foam and preservatives. Insofar as wallpaper glue Make it most often on the basis of organic polymers or starch, therefore, it is used to dissolve it a substance well destructive organic.
The defoamer in the composition is needed so that with a lot of foam and dirt when applied.
Such a solution quickly reaching the lower layer of wallpaper, acting on glue as a solvent. Some types of wallpapers after that do not even have to skip, they depart themselves.
Important! Do not confuse the mixture for removing wallpaper with other mixtures: to remove the paint that are toxic.
The advantage of the finished mixture is that she:
With your own hands, you can also prepare a special solution for wetting to fasterly tear off the canvas from the wall:
Tools to tear off wallpaper from the wall:
To quickly construct the coating from the wall you need to know which it was crooked. Consider several basic species.
Flizelin wallpaper is very quick and easy to tear off from the wall, due to the fact that they have a phliselin substrate - a material based on cellulosic fiber bonded by polymers.
Clear the fliseline wall covering can be different:
Note! If no special glue was applied when sticking the wallpaper, and the PVA - the process of moving wallpaper wallpapers from the wall can be delayed for a long time. PVA is very strong glue and have to use a drill with a special nozzle or grinding machine.
Before constructing vinyl wallpaper, it is necessary to determine, on what basis they were made and what walls under them: drywall or plastered.
Depending on this there are several ways to tear them from the wall:
To save money, you can use a cheap wallpaper glue with a long period of drying or primer for these purposes (it evaporates for a long time). If the plasterboard design was covered with a PVA glue - you can safely begin to dismantle. The resulting coating will not be removed from the drywall wall.
Silkography looks very good on the wall, but it will be more difficult to pull it out, since there is a special glue during sticking.
The removal principle is the same as the vinyl:
In order to quickly tear off the paper wallpapers pasted on a flour or starch celaser, it is necessary:
Remember! For wetting do not take very hot water - You can damage the rough finish or wall.
Video on how to tear off the wallpaper from the walls:
To hardly contempt wallpaper of any kind of walls, you need to have patience and maximum accuracy. No need to rush, because the quality of this work depends on what the room will be in the future.
Exist various methods Removing wallpaper from the walls. This uses a standard set of tools, special chemicals and steam generators. Remove wall coating can also be used using folk techniques.
Before starting repair, it is necessary to remove the old finishing material from the walls of the walls - this is a prerequisite. Sometimes it is not so easy to achieve this, as it may seem at first glance. There are different ways, thanks to which you can remove old wallpaper from the wall. It is about them and other important nuances and will be discussed in today's material.
Many are wondering what is the way to choose to remove the decorative coating from the wall? In fact, it depends on specific situation. There are cases when paper panels are removed without problems mechanically. In this case, there is nothing to use aggressive chemicals. However, it happens that without them it is impossible to do.
For example, if the wallpaper was previously "planted" on PVA glue, in this case it is difficult to do without the use of potent chemical compounds.
It is worth noting that this is a classic method for removing old cloth. They use most lovers' builders. Step-by-step plan Action is as follows:
It is also recommended to pre-wet paper wallpaper so that they are soaked in moisture. This will make it easier for the task of the dugout at times, after which the canvas will lagging behind the wall. For these purposes, it is recommended to use a conventional sponge or soft roller.
The main thing in the process of this work is not hurry. It is impossible to dramatically pull the cloth down, as it can simply break or stratum, which complicates the execution of the subsequent reliance task.
The structure of vinyl wallpaper consists of several materials: paper and polyvinyl chloride. It protects them from moisture and emphasizes strength. Thanks to these factors, problems with the removal of cloth data may occur.
If they are pre-cut with water before the removal procedure, how many make it with paper wallpaper, moisture penetration in internal structure The canvas will prevent the polyvinyl chloride layer. How to be in this case? Next steps:
Thanks to this technique, you can remove vinyl wallpapers from the walls that do not want to dug out. An important stage in this work is to go through the wall cloth by a wall-mounted tig.
Wall panels can be softened by a steam generator - it will make it easier for work at times. This solution will not only make it possible to soften the structure of the wallpaper canvas, but also the glue itself. This happens under the action of hot steam.
Such a solution is much more efficient than the simple discharge of the canvas. After the ferry processing, it is necessary to make a minimum of effort to tear off the old decorative coating from the wall.
There are several effective ways, thanks to which it will be possible to remove old wall coverings without effort:
If the old panels are tightly stuck concrete surfaceThey can be removed using popular chemicals.
These products are purchased in the construction departments. The main advantage of this method is that the special needs used will help withdraw wall coverage in the shortest possible time.
Today, there are various funds designed to remove wallpaper different surfaces. The most popular of them are as follows:
When choosing one or another tool, it is worth paying attention to its quality. As a rule, this product is sold only by world-famous manufacturers. The above-mentioned funds belong to this category of goods.
The solution is prepared from the powder in which the soft roller is wetted and the means to be wallpapers. Those canvases that have a water-repellent coating must be predetermined by a wallpaper tiger.
Most manufacturers assure that such funds do not contain harmful substances that are dangerous to human health. However, it is better before performing such works after all, putting the protective glasses and rubber gloves. If you get a product on open skin, it is better to rinse it under running water.
When performing subsequent work, it is worth considering that the drywall surface is not recommended to moisturize. Otherwise, the moisture will penetrate into the cardboard, after which it will take off with wallpaper.
If, in front of the mixing of the decorative canvas, the plasterboard was not also failed, in this case, it would not work in principle without visible damage to drywall.
In this case, it is advisable to use the wash to remove the old web. Previously, you need to scratch the surface of the wallpaper with a sharp knife, a gear roller or a wall-tiger.
Special fluids will solve the glue structure, after which the decorative canvas is removed without damage to the drywall. Special washes are applied on wallpaper in dosage quantities, according to the attached instructions. In some, especially difficult cases, the removal is significantly difficult, for this reason, special machines and abrasive substances are used to remove the cloth.
If the cloth is tired of the wall, and at hand there is no steam generator, there is a way out. Many are used as the main tool iron. The removal technique is as follows:
If the house has an iron with a steam function, the task is simplified at times.
You can also go a little differently. Some, especially resourceful builders are heated in pots of water to boil, and placing them at the base of the wall. Thus, steam affects the cloth after which it is easier to leave the surface. A rather difficult method, but despite this is very effective.
And yet, the most commonly used folk remedy Upon removing old cloths is the use of a spatula and wet rag. It is this method that every second builder-novice removes wall covering in his home. This technique can be called universal.
Before proceeding to perform work to remove an old decorative canvase, you need to properly prepare the room:
Also before execution of subsequent work, you need to take care of the availability of the necessary tool.
Remove wallpaper from the wall will not be difficult only if familiar with important nuances This question. It is important to comply with the above rules and act in accordance with the designated plan. Only in this case will be able to quickly and comfortably cope with this task.
Repair is a matter of everyday. In order for the result of this process to be the highest quality and aesthetically attractive, the first thing you need to get rid of the old decorative coatings. Therefore, in this article we will look at how to quickly remove the old wallpapers and at the same time do not leave on the walls a single piece of paper or glue. This will allow a new layer of paint or other coating to go more evenly, which will have a positive effect not only for the aesthetic data of the premises, but also on the service life of the coating. Now consider the basic ways to dismantle the old decorative coating, which are recommended by specialists in the repair.
Before talking about how easy it is to remove old wallpapers, consider in more detail why you need to do it. So, with the aesthetic side of the question we figured out. And how are things with a purely technical point of view? First, it is an additional and no one in the layer. Printing on top of the old paper wallpapers new (it does not matter, you have paper, or bamboo paper, or generally bamboo), you turn the walls. Sooner or later, paper will begin to crack, move away from the wall, and appearance Coatings will be completely spoiled. The second aspect is that, swinging with glue new wallpaper and, accordingly, old, you impose different drawings to each other. Just imagine how ugly the result will be. Well, do not miss the issue of hygiene. It is important not only to know how to properly remove old wallpapers, but also be able to disinfect the walls. With the help of primer and antiseptics, the walls need to be cleaned of fungi (they love to accumulate under paper coatings) and mold, as well as other unnecessary "additives".
Before removing old paper wallpapers from all walls that will be subjected to new repairs, you need to cook everything you need. First of all, we prepare two spatula - wide and narrow. Both must be sharp, therefore, sharpen them in advance and test them. The next thing that will necessarily need is a means for removing paper wallpaper (it is called). If there is no possibility to buy this, then just warm the water or use the steam generator. We do not forget to prepare buckets - for waste, for water and other materials, as well as a sponge that will be needed at the beginning and at the end. Additional tools are a roller with needles, plastic film, an ordinary knife and greasy tape.
It is not enough to know how to quickly remove old wallpaper from the walls, it is important to be able to preliminarily prepare for this time consuming process. Even at school, children teach security rules when conducting various works, and in this case it is precisely this part of school knowledge to us. Therefore, originally cover the entire floor with a plastic film. With the help of painting tape, fasten it on the plinths. The same we will have to take all the switches and sockets in the room, after which we turn off completely electricity so that there is no short circuit, because we will work with water. Probably mention that furniture in the room should not be, we will not, because we immediately go to the next item.
To understand how to quickly remove old wallpaper, it should be studied for a start, what is their structure, on what glue they were planted. So, the decorative covers of this type can be divided into three categories: vinyl, flieslinic and paper. Each of them has its own separate approach, it will be written below. As for the glue, which was previously used at the previous repairs, it will be great if you have it again. In the water that we will swallow the walls, it should be added in very small quantities. So any coating and all binding layers will come from the walls quickly, with minimal damage for plaster or putty.
It happens that even the most modern and beautiful renovation has to update. Wallpapers that began to release quite recently - vinyl, dismantled from the walls the easiest way, because we will tell now step-by-step instructions. They consist of two layers - vinyl and paper, because we need to first cut the top. Now spray the walls with water (or a solution that you have prepared in advance on the basis of glue) and wait literally 5-10 minutes. After that, slowly, with effort begin to pull wallpaper for the top layer, in the fields of cuts. They will easily go away from the walls and will not leave after themselves a single track.
Another new type of wallpaper, phlizelin, is characterized by the fact that it includes synthetic fibers. Due to this, such a coating is connected with the walls exclusively due to the binder component, then you mean glue, and if it is twisted, then the coating will no longer be kept. Because if you have not yet understood how to quickly remove the old wallpaper of this type, then I will explain everything very briefly: as in the previous case, we make cuts and abundantly wrap them with water. After the coating swells, pull it away from the wall. At the end, neither glue would remain on the surface, nor pieces of old wallpaper, and it will be fully ready for further new design.
If you need to remove the paper wallpapers that have been pissed, perhaps dozens years ago, you will have to spend much more time and effort. To begin with, we prepare the solution, which is desirable to include, as it has already been stated above, the glue to which the wallpaper was planted. We leave no cuts on them, undermine in some places so that they are easier to shoot them. Washing such a coating best sites. For example, we water a few square meters with water, let me wake up for 5 minutes, we break into pieces. Undoubtedly, pieces of paper will remain on the walls, so they will have to remove them with a narrow spatula or knife. At the end of all this operation, the walls are recommended to walk a wide spatula to completely remove all the remains of the old decorative coating.
The question is similar in its structure - how to remove the wallpaper from the ceiling. Most often, this surface is placed by paper coatings, because the dismantling process will be long and painstaking (consider that it is constantly to stand on the "goats", and all the time keep your head in raised, i.e. the unnatural position). We also note that in this case, a roller with needles can come to the rescue. It will be great to cling all sticking ends and in mechanical order will allow you to quickly cope with such work. Then you have to simply break the remnants and walk along the surface of the ceiling with a wide spatula so that there is nothing left - neither paper nor glue.
It is even easier and faster to remove the wallpaper of any type from the walls using the steam generator. Methods There is a whole mass here, because you can choose at your discretion, what you like more. The first method is to first twist the old wallpaper with water (or solution), after which it is steam by steam, evapoable by this generator. Most of them in such an effect itself will fall off, and you will only have to clean the walls. The second way is the opposite. First, heal the wallpaper with the steam generator, then wetted separate areas. In this case, they will take them very easily. It is only worth noting that some types of wall decorative coatings can source unpleasant odors In the process of heating. In particular, it concerns Flizelin and all of it similar coatings. Toxicity, such wallpapers do not possess, but put on a regular bandage on the face does not prevent.
Making repair, you need to know how to quickly remove old wallpaper from the walls. It is not difficult to do this if you use simple recommendations.
The removal process with a spatula is sometimes extremely simple
Smart tools greatly facilitate an unpleasant and time consuming process.
As you know, all wallpapers are tensioned when dried. Therefore, any irregularity, roughness can cause the lagging behind their base. In addition, if the wall is covered with dust and has stains on the surface, the likelihood is great that all this will be on the new coating. Agree, the stain or subcolt will not decorate the room after repair. You can not be exactly confident that new wallpaper sheets will well hold on top of the old. Glue on a water basis, uneven softening the old layer. As a result, bubbles are formed in one place, and in the other, the coating will be firmly glued. To avoid such a defect, it is better to be restrained, completely clearing the wall.
Locate the old label or label from the roll. It should contain characters that indicate the type of removal: "removed without the residue", "are wet" "are", "stratified when removing", "embossing is not deformed", "double with the upper embossed layer". If the labels are not left, you can use universal methods.
Scratches caused by the "wallpaper tigr" significantly facilitate their removal
For the rapid removal process of old repairs, prepare two spatulas: narrow and wide. It is important that their edge is sharp, so it will easily enter the joints. The edges of the spatula can be sharpened by the emery. You need special fluid, but you can use ordinary warm water. A household steam generator (steam mop) can significantly alleviate. For perforation of the surface, you need a knife, a woeful tiger or roller with needles. The quality of the auxiliary materials may need a greasy tape, plastic film, a knife for drywall, a sponge and a bucket, a greasy roller width of 15-25 centimeters. The list of tools will differ depending on the scope of work and type of wallpaper.
Before starting work, take care of the protection of the floor from wet and sticky pieces of paper. To do this, glue the polyethylene film to the plinth throughout the perimeter of the room. It is best to do with a painted scotch, as it keeps well, and when you dug leaves no traces. Switches and sockets are also recommended to stick with a painted scotch, in order for water in them. Prepare room, you can start work.
Before removal, you can use spikes roller
Hygienic to shoot humid way. So the dust will not be formed, and with a strong layer of old glue, the plaster does not appear, it is easier to remove the remnants of glue from the wall. For wet removal, a special solution will be required. After applying, the wallpaper is removed from the surface without difficulty. For quick removal, you can use water from the crane. Water them with a garden sprayer or sponge. The liquid must be absorbed well. If necessary, you will repeat the procedure. Expect about 20 minutes. During this time, water should twist the dried glue, wallpapers will easily lag behind the surface. The places in which they are not behind, need to moisten again.
If you are not allowed not much, the water will quickly be absorbed, dried, without having time to tweet the glue. And if the surface of the canvase is wetted very abundantly, then the fluid flows into the floor, because of which the surface of the walls will not have time to graze, as it should. Matching the canvas gradually, moving from one place to another, periodically checking how much the finishing material was separated from the wall. Remove better from the seam. If they dried - moisten again. Special caution is needed when removing old wallpapers around sockets, switches, electrical counters, rubber, other electrical equipment. Observing security equipment, turn off the power, then loosen the mounts.
Roller with spikes and a long handle used in hard to reach places, indoors with high ceilings
In order for the work to go faster, use not cold, and hot water. Separate pieces of old coatings will need to be removed using a scraper. Do it carefully not to damage the top layer of plaster. So that the moisture penetrates better to the paper, they need to make small scratches and cuts. Best for this is suitable for a bulk tiger. This tool allows you to quickly perflect large squaresThanks to soft wheels, the putty or plaster is not damaged. After removing the cloth on the wall there is no scratch. Compliance with simple tips will help speed up the work on the inner repairs of the room.
They consist of durable synthetic fibers, have a waterproof layer, so you need to do on the surface of cuts or holes. After that, the wall is wetted with water with a sponge or sprayer. After 15 minutes, the glue swells, the wallpaper begin to move away from the wall.
Vinyl wallpapers Usually easily removed, but ensure that the surface is carefully cleaned, it is still necessary
The same is removed very easily. The coating is a solid vinyl film connected to paper base. To remove them, you need to scratch the surface with a knife, spatula or wallpaper tiger. When a sufficient amount of cuts appeared on them - moisten with water, wait 15-20 minutes. During this time, moisture will penetrate under the polymer layer, dissolving glue. Then make the above horizontal incision, separate the edge, gently pulling the canvas. Polyvinyl chloride is durable materialTherefore, the wallpaper does not break into parts, but separated by one-piece strips. If the walls are left on the wall fragments of the paper layer, they need to moisten and remove the spatula.
Sometimes vinyl cloths can be heavy, which makes it difficult to remove. In this case, they are better to shoot layers. You will need a bulk tiger, a metal brush, a needle roller. By removing the tool moisture-proof protective layer, you must use the device for removing the film equipped with self-folding discs. The device, in contact with the wall, punches the outer layer, without damaging the wall.
They consist of two layers. The top is removed quite easily, and the bottom remains tightly glued to the wall. Panels are not afraid of moisture, so remove them simple way (Washing) will not work. You need a toothed roller or scraper. Using tools, make notches, and then moisten the entire surface. Water must penetrate well under the coating. Wait for a while, try to remove them. If the water poorly smoked the glue, use the steam puller. Overgrown one surface area, press the steam sole to another. To quickly delete, you can use the usual steam iron, which will replace the steam generator.
Successful removal liquid wallpaper manually based on pre-abundant wetting and subsequent thorough wash off of the old coating
Do not rush to shoot this durable universal coating. Maybe enough will only repaint the room water-emulsion paint. But if you decide to remove them, first you need to figure out what the canvas are. They can be a "reusable" use with slices of viscose, which are easily swollen. If they are like decorative plasterUse an industrial hairdryer or grinding machine. Minus industrial hair dryer in low performance and high power consumption.
You can remove them with a manual way. This requires warm water, scraper and spatula. Well soopping them can be processed to dismantling. It is possible to facilitate the work by the proven method: it is necessary to add the Ceresit St-17 primer to the liquid and apply to the surface. After 5-10 minutes, you can start shooting with a spatula. If irregularities remain on the wall - to cover the wall.
Wallpaper of any type can be removed using chemicals that allow you to save time and strength.
Plasterboard used for interior decoration premises. Thanks to him, you can align all defects and irregularities. But, he has a drawback - it is difficult to remove old coatings from it.
The process of removing the canvas with drywall is quite complicated. Plasterboard top covered with a paper layer, which can not be damaged. If a putty is applied, then it is best to use chemicals that dissolve the wallpaper glue. Do not use a large amount of water, as it hurts the outer layer of plasterboard.
One of the most convenient ways - This is a cheap glue. Divide the cheapest wallpaper glue, apply on the wall. He will dry for a long time, as a result of which the materials will bury, are delayed. Now they can be easily removed using a spatula. In some cases, primer is used. It impresses well paper, not so quickly evaporates like water. Using this method, you at the same time and drive the surface. Removing the remnants of glue with a spatula, be extremely attentive, so as not to damage the sheet of plasterboard.
Sheets glued with high-quality glue in one layer are easy to shoot. And what about old paper wallpaper, which are pasted several times? Before starting work well, moisten the surface of the hot liquid. Do this is better not a sprayer, but a sponge or cloth. Wash them gradually, one canvas. You do not need to immediately pay attention to the whole room, because During this time, the walls will have time to dry, and an excessive amount of moisture can damage the layer of plaster.
If some areas failed to remove - take advantage special tool. Zinsser, Atlas Alpan, Quelyd Dissoucol has proven themselves to accelerate the glue removal process. Wallpaper removal fluid is efficient and safe.
