House, design, repair, decor. Yard and garden. Do it yourself

House, design, repair, decor. Yard and garden. Do it yourself

TERMET wall boiler. TERMET gas boilers


The number of sales convincingly proves that termet's wall gas boilers made in Poland are in constant demand from the domestic consumer.

Construction I. internal organization TERMET heat generators are designed to provide maximum comfort And convenience during operation. What should pay attention to when choosing?

TERMET - Polish quality

After Poland entered the EU, all products must comply with the standards and requirements and in force in Europe. But Termet even before this event released exceptionally high-quality equipment developed for a wide range of consumers. TERMET models are presented for buyers with any financial capabilities.

Since the products have been presented in the domestic heating equipment market, the aggregates have undergone certain changes. Thus, the automation and inner device of the TERMET boilers was redone, taking into account the unstable gas pressure in the pipeline and the water supply system. Dimensions are reduced taking into account the limited area of \u200b\u200bthe premises used under the boiler room.

Comparison of hinged equipment

The company offers several dozen different modifications of wall boilers. To facilitate the choice, it is possible to conditionally divide all models into three main categories:



To facilitate the maintenance of the TERMET boiler, the self-diagnosis system is installed, signaling about possible disorders and an outstanding encoded signal on the LCD display.

When installing heating equipment made in Europe, it is extremely important to adhere to the manufacturer's recommendations regarding the installation. The boiler connection scheme is attached to the technical documentation.

To ensure efficiency, the following rules will be required:

On which boiler to stop the choice

Expert conclusions, the analysis of the work and operation of the boiler indicate that condensing models are most convenient and comfortable in management. They have a large efficiency and high efficiency.

Performance and long service life - these technical characteristics are distinguished by single-circuit units. Two contour boilers from atmospheric burner It will be suitable for a private house, in the apartment to establish them will be problematic.

Judging by the reviews, the TERMET boiler is another model of heating equipment proving that european manufacturer Releases exceptionally high-quality and reliable units.

Gas water heaters of the target TERMET type are reliable, safe devices that have proven themselves both in Europe and in Russia as perfect combination Excellent quality and affordable prices. All termet equipment is created from high-quality European-made materials on modern equipment using newest technologies. Gas speakers Termet is equipped with modern automation and necessary set of safety elements, differ in high efficiency, high performance, compactness and attractive design. Depending on the model, the launch of the burner is made with piezo or electric ignition.

Gas Wall Mounted Boilers TERMET

The TERMET dual-killer series is represented by models with a separate heat exchanger - Minimax Dynamic (24 and 29 kW) and with the MiniTERM bitmatic heat exchanger (24 kW) and Maxiterm (33 kW). Unico and Minimax Turbo single-mounted models (13, 24 and 29 kW). Wide power range from 7 to 24 kW or from 10 to 33 kW guarantees the normal operation of the devices even in small apartments and houses. TERMET boilers have all modern features and security tools: protection against freezing the heating contour and from blocking the pump; Protection against the disappearance of thrust, loss of flame and overheating.

In the boilers, Termet has all the necessary modern functions and security tools: protection against thrust disappearance, flame loss and overheating; The pressure sensor monitors the upper and lower limits of pressure in the heating system. Built-in functions in gas wall-mounted boilers Termet: "Protection against freezing" and "pump anti-blocking", functions: "Winter-Summer", "Melting of the pump" in heating and DHW modes, changes in the starting and thermal power of the boiler.

The control board has a built-in weather-dependent automation and the ability to connect a room thermostat. Full self-diagnosis of the boiler makes it easier for the work of service professionals. All information about the boiler mode is displayed on the LCD display.

The maximum unification of the spare parts makes it possible to service services to contain a small warehouse of spare parts, but to fully maintain boilers. Almost all sensors are interchangeable. On all the lineup There is one control board and one gas valve.

All boilers are adapted by gas pressure to Russian realities What gives stability in work.

TERMET boilers, to date, one of the most compact devices in Europe. And thanks bright design, will take a worthy place in any interior. The variety of models allows you to commit optimal choice In accordance with existing needs.
Ayaks-Trade provides full warranty and information support equipment brand TERMET throughout the Russian Federation.

Gas boilers Termet - features and characteristics of models

5 (100%) Votes: 3

Termet is a famous Polish manufacturer who supplies a wide range of heating equipment to the domestic market. Termet gas boilers are the main direction of production of this company.

The boiler equipment Termet is, first of all, the excellent quality that the manufacturer has achieved thanks to the accumulated knowledge and technologies, as well as the vast experience in the market. The company understands the market, takes into account customer requirements and introduces innovative developments. A high-quality product with a long service life is available to the buyer.

Check the price and buy heating equipment And you can have accompanying goods. Write, call and come to one of the shops in your city. Delivery throughout the Russian Federation and CIS countries.

A large range from a technical point of view allows you to select a gas unit based on the type of room where the design, area, as well as the power and other parameters will be installed. Among the many models offered, you will definitely select the best option.

Polish quality

After the entry of Poland to the EU, all the equipment began to meet the standards and requirements that operate in the European territory. However, it is not necessary to think that before that the company produced low-quality products. All boilers were appreciated by a variety of consumers.

With the advent of russian market, heating devices somewhat changed. For example, automation and internal device has been changed taking into account the differences gas pressure In pipelines and water supply systems. The aggregate design itself has become less due to the limited area of \u200b\u200bboiler rooms.

Assortment row of hinged boilers Termet

TERMET gas boiler is presented in a set wall variants. To facilitate the choice, three categories can be distinguished: 2-contour, condensing and 1-contour aggregates:

  1. The double-circuit gas boiler Termet is characterized open camera combustion. Connection is carried out to the classic chimney. Equipped with. The design is equipped with an electronic control unit, a flame ionization control system, a modular burner. Equipment requires boiler roomcorresponding to certain parameters.
  2. Termet is a 2-contour, but it is characterized by the presence of a closed combustion chamber. Air fence and output of combustion products occurs forcibly through coaxial chimney. Big plus this group of boilers in high useful action coefficientwhich is ensured by installing a condensation module. The device maintains the heat of the outgoing gases and transmits the heat carrier. The intensity of the gas supply changes in the automatic mode of the water flow regulator depending on the head of the cold fluid. Separate heat exchanger. The primary circuit is made of stainless steel, the secondary is copper, plate-type. Gas supply is automatically adjusted using smart automation. You can connect thermal sensors.
  3. A single-mounted thermal boiler Terme is designed only for heating. Outline only one, however it is possible to connect a boiler indirect heating, replacing them the second outline. If desired, the heating unit can be converted to use. The main advantage of this category is high performance, thanks to which the heating of large areas is possible.

Boiler service facilitates installed system Independent diagnostics that gives error signals and displays information on a liquid crystal display.

Gas boiler termemet

FEATURES OF MONTAGE

Installing any gas boiler Requires to follow all manufacturer's recommendations. In the system of the aggregate, you can find information about the connection scheme.

To ensure the performance of the boiler, you will need to fulfill such items:

  1. Installing and commissioning the Polish gas boiler TERMET should only be the manufacturer's specialist along with the gas service inspector. After the working capacity has successfully passed the check, the aggregate under Russian conditions is performed.
  2. It is worth making adjustments, otherwise the amount consumed the amount of gas may be higher than expected. The gas pressure sensor makes it possible to set values \u200b\u200bso that the boiler will effectively work even if the pressure in the pipeline will decrease to 0.3 MPa.
  3. In case of incorrect installation, it may be caused by blocking the automation of the unit. It is worth a responsible approach to the selection of sizes. chimney. Need an additional installation of a node collecting condensate.
  4. The faults arising should be entrusted to specialists, and not try to eliminate the problem yourself. Otherwise, in the future you may refuse to maintain warranty.

Assortment of TERMET models

The model range of gas heating equipment of this manufacturer is quite wide: termes minimam, unico, maxisters, etc. In the table Consider the popular series.

Model power, kWt Purpose Gas removal
GCO-13-00 \\ k (Unico-13 \\ k) 4 — 13 heating chimney
GCO-13-00 \\ k (Unico-13 \\ k) 4 — 13 heating chimney
GCO-29-00 \\ k (Unico-29 \\ k) 10 — 29 heating chimney
GCO-24-00 \\ k (Unico-24 \\ k) Turbo 7 — 24 heating turbated
GCO-DP-13-10 Minimax Dynamic 7 — 13 heating + GVS. chimney
GCO-DP-21-03 Minimax Dynamic Turbo 7 — 24 heating + GVS. turbated
GCO-DP-13-10 Minimax Elegance 7 — 13 heating + GVS. chimney
GCO-DP-13-10 Minimax Elegance Turbo 7 — 13 heating + GVS. turbated
GCO-DP-21-05 Miniterm 7 — 21 heating + GVS. chimney
GCO-DP-21-13 Miniterm Turbo 7 — 24 heating + GVS. turbated
GCO-DP-29-26 / 29 Maxiterm 10 — 29 heating + GVS. chimney
GCO-DP-29-26 / 29 Maxiterm Turbo 10 — 29 heating + GVS. turbated
GCO-DP-29-26 / 33 MAXITERM 10 — 33 heating + GVS. chimney
GCO-DP-29-26 / 33 MAXITERM TURBO 10 — 33 heating + GVS. turbated
TERMOCONDENS WINDSOR 50. 8 — 47 heating chimney
TERMOCONDENS WINDSOR 100. 34 — 108 heating chimney
TERMOCONDENS WINDSOR 50. 8 — 47 heating chimney
TERMOCONDENS WINDSOR 100. 34 — 108 heating chimney
TERMOCONDENS PMB 24.35 7 — 35 heating + GVS. chimney
TERMOCONDENS PMB 35.35 7 — 35 heating + GVS. chimney

As practice shows and confirm the conclusions of experts, the most convenient managers are condensing units. They differ high efficient efficiency, as well as high efficiency.

Good performance and long service life is characteristic of 1-contour boilers. 2-contour atmospheric buy for private houses, as the apartment will establish them quite difficult.

According to reviews, TERMET gas boilers are high-quality and reliable equipment.

The ability to equip this brand to respond to the most varying needs guarantees the optimal set of products, represented by 4 series of mini-boiler rooms:

Termaster Boilers of this category have power from 7 to 24 kW, equipped with a copper bitter heat exchanger and cl. On the combustion chamber. In addition to heating and HSV can be operated with the installations "Warm floor".

The number of sales impuditably justifies that wall gas boiler equipment Termet made in Poland, are in constant demand from the Russian buyer. The system and interior of the Termet installation device specialized to supply the greatest convenience and comfort during use.

Gas boilers termemet

After Poland went into the EU, the entire range is obliged to approach generally accepted standards and conditions working in Europe. But Termet still prior to this notice, only high-quality equipment created for the extensive circle of buyers produced.

Since the ruler was presented on the Russian segment of heating equipment, the devices suffered specific configuration changes. So, electrician and interior arrangement Termet devices were created taking into account the unstable gas pressure in pipes and water supply systems.

TERMET gas boilers, in which the manufacturer of which is the principle "Heat - by affordable prices"Presented in the implementation of the most than 40 states of the world.

And each of them is reputation as practical solution For their I. apartment houses. Alone from your requirements for the upcoming heating system, you can purchase the TERMET gas boiler, with any main features.

TERMET gas boilers

The ability to equip this brand to meet the most varying needs guarantees the optimal set of products, represented by 4 series of mini-boiler rooms: Termaster boilers of this category have a power of 7 to 24 kW, equipped with a copper bitter heat exchanger and closure. On the combustion chamber.

In addition to heating and HSV can be operated with the installations "Warm floor". The company offers a number of 10 different configurations of wall instruments. To simplify the choice, it is possible to symbolically divide all series for 3 main groups:

  • The gas 2-circuit boiler of the heating TERMET - owns an open chamber of burning.

Connected to ordinary chimney. The Bi-Letter Radiator allows the DHW and coolant to be reached at a time.

Gas condensation heating 2-contour TERMET boilers - in the distinction from the previous configuration, owns the covered combustion chamber.
The oxygen fence and the removal of gas burning residues are performed through a coaxial chimney with a fancy method.

  • 1st contour gas heating boilers TERMET - are adapted only for heating the coolant of the heating system of the house.

Have a 1-in contour of heating.

  • 2nd can be done, without the help of others, turning on the storage device of indirect heating for the manufacture of hot water supply
  • It is possible to remake another fuel.