Cersanit Installation Systems are characterized by stylish design and long service life. To make the right purchase, it is recommended to study the features of choosing and installing such products.
Cersanit is a Polish firm that occupies a leading position in the production of plumbing. The company is known for many years and offers its audience only high-quality and modern solutions. To date, the installation of Cersanit is manufactured in 12 factories.that are equipped with modern equipment. The manufacturer has repeatedly received the "Superbrand" award and is considered the best. trading brand. on Russian territory. The manufacturer enjoys attention from buyers, as it offers its audience stylish models High quality at affordable prices. Devices are rarely broken, so the Cersanit trademark is considered a reliable supplier of plumbing.
Installation is a metal structure, on which sanitary devices are fixed with auxiliary elements (for example, with a drain button). Before buying, the pros and cons of this device should be studied to make sure that Cersanit products are suitable for your purposes.
The dignity of installation includes the following qualities:
Despite the fact that the devices occupy leading places in the rating of producers, consumers have cons.
The disadvantages include:
The manufacturer offers several installations that differ in their device.
Depending on the attachment, two types are allocated:
Also, the choice may affect the drain mechanism of the device.
The flush button may be several types:
The first two options are characterized by simplicity and accessibility in repair. The contactless button has a special sensor that independently checks whether there is a person near the toilet, and produces water drainage.
The mounted toilet kit consists of the following positions:
There are models with a drain button and without it. You should carefully read the model and check for all the necessary components in order not to return to the store again.
Systems of systems may differ depending on the idea of \u200b\u200bthe engineer. There is a norm according to which the standard installations of CERSANIT are produced:
Constructions are able to withstand the load weighing up to 800 kg.
There are traditional Bachkov sizes. In rare cases, its length exceeds 50 cm, the models of 10 cm wide are mainly used. The parameters depend on the type of installation. Framework structures have the following dimensions:
Block systems possess the following parameters:
First of all, it will be necessary to decide on the place where it will be located. suspended design. Select a zone that is located next to the water supply and sewage. Consider that the toilet should not interfere with users in the free move on the bathroom.
After determining with the location, you can begin installation measures.
To do this, you need a markup that must have a number of features:
These actions will help simplify installation installation and exclude the occurrence of errors when installing.
To install plumbing installation, you need to stick step by step leadership And comply with the sequence of actions. Correct actions guarantee system performance and time savings. Installation instructions consists of the following actions:
When working, it should be remembered that the required slope of the sewage must be at least 45 degrees.
First of all, the pipe is supplied to the equipped nicheThe cross section of which is 100 mm, with a slope in the direction of sewage at least 5 cm. It should be 25 cm from the center of the niche, and only after that it is allowed to mount it with 45 degrees.
In the process of installation, it is required to constantly monitor the level of installation to eliminate the formation of unwanted distortions.
After setting the design is completed, it should be checked. It should also exclude the appearance of leaks. If in installed installation It will be discovered, then the adjustment will be required. It is necessary to adjust the emergency tube that drains excess water if the float or shut-off valve does not work.
There are two solutions to this leakage:
In the installed installation may be temporary details. Often there is an unsuitability of the drain button. If, when you press the valve, the water is not washed away, this indicates a malfunction of drain reinforcement. Connections between the button and the valve can be broken, or the breakdown lies in separate parts. In this case, it is necessary to remove the defective part and repair or replace it with a new one.
Plumbing installations from the Polish manufacturer Cersanit are in wide demand. Popularity is due not only to high quality products, but also affordable prices. If you make a comparison with German trademarks, they have one toilet with the same as the entire system and components from the Polish firm. The manufacturer produces several types of products, among which you can select the following popular models that are in great demand.
This model It is considered the best budget choice. The DELFI line is the most popular collection that numerous positive feedback is present in the network. Despite the plastic components, there are very few complaints about the operation of the device, the model is distinguished by a long service life and uninterrupted functionality. Systems are equipped with antibacterial seat or polypropylene seat with a microlift device.
Some customer feedback testify that the drain mechanism breaks. It is difficult to find spare parts for repair, so most consumers replaces the entire tank completely. Installation is distinguished by an affordable cost than attracting a lot of fans.
Now there are a large number of diverse toilet models. Each of them, depending on the design, requires a certain placement of pipes in the bathroom and the corresponding space for installation. Therefore, when choosing, you should pay attention to some plumbing subtleties. For example, the toilet with the floor setting Vista has an oblique (inclined) drain hole and a single drain. This option is very convenient to operate and when installed. The advantages of the model will be the best consumers who have established such an aggregate at home as well as photos.
Unitaz-compact model Vista is a universal outdoor model With a drain tank, which is attached to the bowl of the bowl. Compacts are a classic option that is always in trend. They are the easiest and most convenient installation, in the future maintenance and won. The main advantage of compacts is the possibility of replacing one piece in case of damage, not a whole toilet bowl.
The package includes:
Cersanit Vista - Outdoor toilet, that is, it is attached to special plumbing dowels directly to the floor. Such a model is very popular among consumers. It is convenient in operation and very reliable.
Toilet Cersanit Vista.
The tank joins the cup almost close, which makes the device more compact. Wash in this model toilet bowl circular or reverse - this is ensured by the direction of water jets on a specific path through special channels. This type of flushing guarantees very high-quality cleaning from uncleanness, because the water is cleaning completely all the bowl, and not a certain area, as it happens in the case of a direct direction.
Council. When choosing a toilet, it is necessary to pay attention to the drain, eyeliner, construction as a whole. This will help significantly save money and implement designer dreams.
Drain management in the toilet CERSANIT VISTA occurs with the help mechanism. The button for this model is one, that is, the drain is single. It is pressed into the inside, which is considered a more reliable mechanism than with a rising button. For each washout leaves about 6 liters of water.
An insignificant noise with a set of water in the tank is provided by the lower line - during the receipt, water beats the fountain, and not pours from above.
Bowl from inside the Vista model visor, with a bias in the direction of release. In such a cup of impurities, they are not delayed, and immediately fall into the drain and the possibility of splashing water during the flush is excluded.
The design of the release is considered the most an important parameter When determining with the choice of toilet bowl. The release is a drain hole that connects to the sewage system. Option of release in the Vista model is a pipe located at an angle of inclination. Thanks to this, the toilet is less likely to be clogged and connected to any type of drain. Cersanit Vista Unitaze design is quite simple.
Council. When installing unitazes-compacts, it is better to first put a tank on the bowl, and then connect to the riser.
In the manufacture of toilet plants at the production of Cersanit, two varieties of ceramics are used:
Bowl of toiletza
Finished plumbing products from above are additionally covered with a special icing that protects against damage. The mechanism in the tank, with which the drain occurs, is made of high-quality plastic.
Parameters Cersanit Vista.
Having understood in the installation technology of the toilet bowl, you can save on plumbing services and perform work as high quality as possible. The toilet can be mounted in the traditional way or more modern method - with installation. In the second case, the drain tank will be hidden in the wall, which is favorable affected by the interior of the room.
You are proposed instructions for performing each of the listed installation options.
| H. | h. | h1. | L. | l. | l1. | B. | b. | |
|---|---|---|---|---|---|---|---|---|
| With a solidly tired shelf, mm | 370 and 400. | 320 and 350. | 150 | Not less than 605 (according to the consumer and manufacturer, it is allowed to make toilet toilet long 575 mm) | 330 | 435 | 340 and 360. | 260 |
| Without a solid shelf, mm | 370 and 400. | 320 and 350. | 150 | 460 | 330 | 435 | 340 and 360. | 260 |
| Children's | 335 | 285 | 130 | 405 | 280 | 380 | 290 | 210 |
In the case of installation of a toilet bowl, the listed list will expand the corresponding set. Everything you need is bought in any plumbing store.
First step . I overlap the water supply and drain from the whole liquid.
The second step. We unscrew the hose by which the tank is connected to the water supply.
Third step. We unscrew the tank fasteners. If they rusted, armed with a screwdriver or a horn key. We press the bolt head to the selected tool and unscrew the nut using a filter key. If it does not work, pre-wrap the kerosene nut. Remove the tank.
Fourth step. We dismantle the toilet bowls.
Fifth step. Disconnect the blocking of the toilet to the sewage.
In the houses of the old building, plums are usually attached with cement coating. For its destruction we use a hammer and chisel. We need to join the cement and gently shake the toilet to the parties. Drain must be checked and dipped. We creep the product, giving water remnants to merge into the sewer.
If the toilet has been released to the floor, you need to take a wax ring Sixth step. We close a sewer hole with a wooden or other suitable plug.
Important! Sewer gases have not the most pleasant smell. At the same time, they are poisonous and easily flammable. Be sure to take into account this moment during the work.
The base for installation of the toilet must be even. There are several options for the development of events, namely:
We pay attention to the pipes. Sewer from garbage and various deposits, install a tap (if it was absent) for overlapping the water supply to the tank.
As a rule, when solding the toilet and the tank are discontinued. The internal fittings of the barrel is most often collected, which significantly facilitates the installation process.
First step. We put the bowl of toilet bowl into its place and make tags at attachment points.
Marked on the floor under fasteners The second step. We remove the toilet and drill fasteners in marked places.
Third step. We score a dowel to the mounting holes.
Fourth step. Install the bowl. We insert fasteners through special sealing gaskets. Tighten the mounts. It is not worth pulling too much - you can damage either fastenings, or even the toilet itself. I pull until the hard attachment of the plumbing product is to the surface. We close the fastener with plugs on top.
Fifth step. Mount the lid and seat. The guide on their assembly usually comes in a set with the toilet, so we will not stop separately at this event.
Sixth step. Connect the toilet to the sewage. The procedure depends on how to connect the release of the toilet.
Accessories for toilet and urinal
If the release is done in the wall, we work like this:
If the release is placed in the floor, we do the following:
Helpful advice! If the connection of the toilet bowl with the drain pipe is performed using corrugations, from sealing in most cases you can refuse, because The design of such a transition hose itself is capable of providing a sufficiently dense adjacent.
Seventh step. We carry out the installation of the tank. Drain mechanisms are usually sold already assembled. If the mechanism is disassembled, collect it according to the manufacturer's instructions (the order of assembly for different models can vary somewhat).
We take a gasket from the kit and install it in the waterproof for water in our toilet. Install the tank and tighten the bolts.
Fasteners are most convenient to set this way:
Eighth step. Connect the tank with a water supply with flexible hose. Turn on the water supply and check the quality of the system. If somewhere rolls up, tighten the nuts slightly. The level of tank filling with water is adjustable, shifting the float is lower or higher.
Several times we give a tank to fill and drain the water. If everything is fine, we accept the toilet to continuously operate.
Modern option Installations. A special wall installation is used, in which the tank mechanism hides. As a result, only a bowl of the toilet and a drain button remain in sight.
First stage - installation of frame
We carry out the installation of a metal frame with fasteners. To the frame attach a tank. The position of the frame is adjustable using brackets at the top and screws below. The frames are sold separately, have the same structure and are suitable for use in a complex with any toileties.
The collected design will have a height of about 1.3-1.4 m. The width must exceed the tank width.
Second stage - hang a tank
Installation perform in compliance with the following recommendations:
Third stage - mount the finished installation
Pre-check the smooth wall with a plumb. When detecting deviations, we do the following:
Fourth Stage - Install the Tank
First connect the tank. Drain can have upper and lateral outputs. Almost everyone modern models Bachkov allow you to choose between these two options.
Important! When installing the toilet bowl, it is better to refrain from connecting a tank using a flexible hose. Lost much longer than the hose. Will you want to destroy the framework of the carcass in the near future for five minute replacement of such a hose? That's it!
To connect it is best to use plastic pipes. All the necessary fasteners usually come complete with a tank. Separately you have to buy only the panel for the drain buttons and it is not always.
Connect the release of our toilet with sewage. It is most convenient to do it with the help of corrugations. Check the tightness of the design. If everything is fine, overlap water, temporarily turn off the toilet from the drain and remove the bowl aside.
Important! The procedure for connecting a tank to the toilet and water supply may vary depending on the product model. We specify these moments in a separate manner and follow the management of the manufacturer.
Fifth stage - we are placing installation
To do this, use moisture resistant plasterboard with a thickness of 10 mm. It is recommended to fix a double layer. Pre-do the following:
Breeping to the frame of the sheets of plating with special self-tapping screws. The fastening step is to withstand at 30-40 cm. The design will have a small size and weight, so there are no rigorous recommendations for the distance between the fasteners.
Plasterboard are lining with a tile or finish with another way at your discretion.
Helpful advice! Before starting facing the box with a tile, we set the plug and cuff location at the place of the future location of the drain button. Usually they are present included.
Sixth Stage - Install the toilet
For this, the conclusion of the bowl connect with the sewer and hang the product to the pins (we were installed at the previous stages of work). These actions can be performed in the reverse order as you are more convenient. Tighten the fastening nuts.
Important! Pre-tile, which will contact with, you need to cover the layer of silicone sealant (instead you can install a gasket).
It is possible to include water supply and use the toilet to directly intended.
Installation assembly guide remains the same. Only the order of installation of the bowl of the toilet varies. Work in the following order.
First step. Firmly fix the position of the knee. This will help you with metal fasteners.
The second step. Treat the release of the toilet to technical ointment.
Third step. Install the toilet to the place intended for it. Circuit the contour of the plumbing product and take the holes for fasteners.
Fourth step.Remove the toilet and set the mounting corners from the kit.
Fifth step. Install the bowl, press it out fan pipe And secure the plumbing product with bolts or other fasteners, which are included.
Sixth step. Connect the tank to the plum. Installation and connection of this item is performed in the same way as in the case of mounting the wall model of the toilet.
Seventh step. We derive the drain button into a pre-prepared hole in the trim, we turn on the water supply and check the operation of the toilet. If everything is fine, we accept the product into permanent operation.
Read our new article -, and also find out what kind of varieties are how to choose and install.
Good job!
Add site to bookmarks
Installing the toilet with your own hands - the task is simple, only the knowledge of some nuances is required. Mounting and Connection Technology different species The toilet bowl is almost no different from each other. The difference lies in connecting additional functions or installation of automatic equipment.
To connect the toilet to sewerage, you will need corrugations.
Installing the toilet, the instruction to which must be included in the kit, can be performed by any wishing. Installation of equipment for a set and drain of water is also simple, however, to the installation of the Flossing Tank's float should be taken to special attention. The felt valve is needed to adjust the pressure and the amount of water in the tank. The following is considered instructions for installing the toilet.
The diagram of the size of the toilet.
If you decide to install a toilet bowl, then you will need to guide, preferably visual. Instructions on how to install the toilet will provide invaluable assistance in performing this procedure.
First, before installing a new toilet, it is necessary to dismantle the old one.
Dismantling of old equipment should be made according to the following scheme:
Buy new subject plumbing great labor will not be, because today in the market building materials You can choose the toilet, suitable in appearance and value to any person.
After that, you can start installing new equipment.
The instruction based on the norms and rules established by GOST, states that the height of the floor toilet should be 40.0 - 45.0 cm.
Back to the category
Device diagram toilet bowl.
For work you will need:
It is necessary to determine the exact "coordinates" of the installation of new equipment. The easiest option is to install on the old place. But it happens that the dwelling is subjected to redevelopment, then you need to choose the right place to install, taking into account the location of the sewer, the crane for the supply of water to the tank and, of course, convenience, comfort.
Note! Before finally fasten the device at the selected place, you should sit on the toilet and see if it is convenient. This will later help avoid multiple problems.
Back to the category
Floor toilet scheme.
Installing the equipment on the tile is quite simple. The base of the toilet is equipped with two holes. On the estimated place of installation, with the help of a pencil outline these holes on the floor. The toilet is removed to the side.
Then, the holes are drilled by the hole suitable for the size of the dowels of diameter. Then B. drilled holes Dowel carefully rush, and the bowl is put in place.
For incoming screws put on rubber washers. Screws are inhibited into the appropriate toilet holes and screw in the floor. It is possible to hide the screws, put on them plastic tips.
It is also possible to establish a bowl on a silicone substrate, while the instruction described above is used, but special wedges are inserted under the base of the toilet, and silicone is introduced into the resulting gap. Then the bowl is fixed by bolts. This option enjoy if the floor is uneven (roll is aligned with silicone under the base).
Another way - sitting on glue. With the help of epoxy glue, the installation site and the base of the toilet bowl are lubricated. Then the toilet is connected to the sewage pipe and are strongly pressed to the floor. This way can be used in case of the impossibility of drilling holes, for example, when the installation is performed on the heated floor.
If the equipment is installed on the floor of the tree, then the wooden taffet or substrate from rubber is mounted first.
To sewage, you will need corrugation. It is flexible, and it can be stretched or compressed, having achieved the required length. One end it connects to the release of the toilet, and the other is inserted into the rope of riser. If necessary, produce sealant treatment.
Back to the category
Equiping the place, you need to prepare a toilet to install (connect the drain tank with the bowl). In order to do this, a rubber gasket with a hole under the drain of water is installed between the tank and the bowl. Then the buckets and gaskets made of rubber in the form of cones are on the included bolts. Bolts are invested in the appropriate tank holes and bowls, wash the washers and neatly screw the nuts.
Nuts spin with caution, otherwise the toilet or the tank can burst. Slightly tightening them, a little water is poured into the tank, and if it does not proceed, it means that the tank is completed.
After that, you can install the seat and cover on the toilet, securing them with special bolts.
Bathroom - room with high humidity and increased cleanliness requirements. Therefore, it is very often decorated with a cafeter. Installation on tiled floor is carried out quickly and without the use of special tools. We will understand what methods are used to consolidate and how to do everything right.
Important moment. If plastic brackets, and this most often happens, when installed on an uneven surface, they are deformed over time. Start shifting or staggering. Therefore, before the installation starts, you must track the horizontal, if necessary, put the leveling plates or something like that.
The only option to secure Sanatayans where the drilling is impossible. For this, only equipment with a large volume of large volume is suitable. This draws attention to when buying.
Sometimes it is glued to cement. This is an outdated, quite a time-consuming method, not always gives the desired result. We will analyze how to properly install the toilet to the tiled floor with glue.
It is impossible to use the equipment at least a day, during this time it will completely clarify. You can find accurate information if you read the manufacturer's instructions.
Sometimes inexperienced masters make mistakes that spoil all the work done. We will analyze the most common of them.
