Automotive used tires do not need to throw away. After their use for direct purpose, you can apply tires for decorating the yard or garden plot. More interesting ideas You can see others, and why not try it to do this near yourself? After all, the process of making many crafts is very simple.
Giraffe
For this interesting figure, you need to wear one big tire to the ground, depth until the middle of the circle. Ahead of fixing with self-drawing high round log. It needs to fasten the muzzle - a small log cabin. Eyes and ears can be cut out plastic bottle Or a piece of linoleum. It remains only to paint everything in yellow And make brown specks.
Zebra
This figure is done in the same way as the giraffe, only the paint is needed white and black.
ARTICLETOC: Enabled \u003d YES)
The disposal of car tires becomes an integral part of our life. Everyone solves this problem in its own way. Tire machine for playground! This idea to many soul.
The kids from such a craft is simply delighted, and adults look with admiration. Considering that tires are resistant to negative external influences, this design will delight the eye more than one year.
Parents with young children, to improve the platform for games in the country or street, it will take some time and no financial spending. And the children will play without distracting parents from important affairs.
Crafts for such a site can be made it yourself, even if you have never been doing it before. The ideas and order of work can be spacing online. More often for making them use plastic bottles and tires. There is nothing complicated in the manufacture.
The main thing is desire and some time.
You will not need to spend money on the purchase of expensive materials, because the tires will be happy to give employees of car services, which usually accumulates sufficiently. What is just not made of tires craftsmen: swing, sport shells, flowerbeds, etc.
Constant success in boys, and modern girls, uses transport. Therefore, you can start with the manufacture of a car for children. The typewriter from the tires for the playground can be of various brands (species) - from completely simple to sufficiently complex.
The easiest option will wear the steering wheel from the real car and the seat in the tires from the tire.
Place for the site, where the cauldron will be installed, it is better to choose the illuminated, spacious, located near the house. Best coating There will be a backfilling from sand or lawn, which will have to be cleaned of stones and glasses in order to protect the kids from injury.
It's not difficult to make it easier. To do this, cleaning well and paint the board, is fixed between the tires of the same size. These will be rear wheels. In the same way, the front can be made. But only one wheel can be installed in the center so that the caretaker reminds the racing car.
The depth of the holes for the wheels machine must be such that the latter are hidden to the disk. Then transport will be stable. Fall asleep their land, wonder it well. It is better to dig tires with disks. But, if there is no, you can replace plywood to give stiffness design.
Linoleum is used to simulate gender, but it can be replaced by plywood. So that Linoleum does not raise the wind, the steering wheel in the ground is preferably inserted through it. The tilt of the steering wheel is chosen in accordance with the growth of a particular child.
Make in the form of a cargo can be a children's sandbox.
You can make the seat, from one tire or, putting two, on top of each other.
In the simplest embodiment, limited to fastening on plywood tires. If there is a desire to make it more comfortable, the back will be required. Colling the seat can be something soft - foam rubber, carpet, blanket.
A plastic chair is suitable, which do not use at home, wooden seats from chairs, old chairs. Scuffing the legs, they are fixed, fixing using self-tapping screws.
Details before painting wash and dry well. After that, a new car is painted in preferred colors.
To make a craft to give greater similarity with the original, the headlights add. For them, covers will rise from cans.
And the next model for the kids of the entire yard, because, it allows a large company to drive.
Doors attached to the craft, undoubtedly, make a handicraft similar to the real car. For the game of a large number of children, there are several seats (2-3). If there is an extra tire, make a spare, attaching it from behind and writing a paint number.
The roof to the car, covered with linoleum, besides the fact that it will give similarity with the real machine, will protect against sunlight and a small rain. To secure it, you will need wooden barsBurned in the form of the letter "P". Total need 3 pieces. Two designs are installed in the rear above the machine (it is better to wear them into the ground), the third is closer to the fore. Brucks are connected from above to obtain a horizontal frame, which is fastened with self-strains or nails of linoleum.
For a racing car you need to find 5 tires of the same size. A little labor of parents and they will turn into a wonderful car, which the child will not leave indifferent.
Three tires enough to make the car, as in the photo below. On it, small riders will not be able to rush through the planet's expanses, but they will play with pleasure.
For "steep" kids, you can make a motorcycle. True will have to fantasize. But the happy faces of the owners of such bikes will become award-winning parents.
Video: Racing Machine from Wheels, Tires.
Our article we will talk about crafts from tires for the garden with your own hands. In the photo in the first part of the article - useful crafts that will make more comfortable life of any summer house. In the second part, we collected the most bright decorative crafts from tires- Vasons, swans, pendant pots for ampel colors and master classes in their manufacture.
Non-slip tracks
Number one in our charts - tire tracks. First, you will no longer have to fight grass growing on the tracks. Secondly, reliable protectors will not let you slip.Thirdly, with such paths you will not apply dirt into the house.
Tracks from tires are durable, and it is not difficult to make them: cut off the protectors and with the help of nails (and better - self-tapping s), attach them to several transverse sticks.
Reliable steps
Who happened to fall from the stairs, the reliability of the coating on these steps would appreciate the reliability of the coating on these steps.
Factor border
Tires most often have a rather beautiful drawing. It can be used to decorate the bottom of a small subsidy. At the same time you will save the walls from the inevitable dust and dirt.
Before making such a craft from tires it is important to make sure that the lengths of the treads with the same pattern are enough for the entire room.
Cheap seat
Who would have thought, but the tires are convenient to use as gardening "otfiki" - the truth is quite solid. Such crafts from the tire with their own hands are simple in the manufacture, the only minus is rather heavy, and they are not very comfortable to drag.
Comfortable cycle parking
Do you have a family of avid cyclists? Make for the whole family cycling from tires. And most importantly, when a new cyclist appears on the light, it will be very easy to expand.
Ground Color Vases
"Chamomile" cuts from the top of the tire, then the tire is turned off. It remains to paint it, and the color tank will be ready. If the bus is not removed from the base, you can make a carcase with a leg.
The most time-consuming operation is the tire turning.There is a small trick: when you get along with the tire half the bus, push it to it, so that the oval turns out - then the work will be easier.
Combine a few tires, experiment with the shape of petals and coloring, and your crafts - vases from tires - will be unlike others.
Swans from tires
Swans - classic crafts from tires. Technology is about the same. In the photo - instructions for this craft from tires for the garden with your own hands.
1. On the tire draw the scheme of cutting.
2. Cut the tire according to the scheme (first the head, then tail and feathers).
3. Turn the bus.
4. Do the beak and paint it into red.
5. Fold 2 halves of the head together, insert the beak between them, fasten with screws.
6. Raise your head and give it a little. The resulting fold pinned with self-draws.
7. Coloring the swan, decorate your eyes to close the screws.
Tire cutting options may differ slightly. Choose the one you like more.
Exotic Birds from Tires
Do you have a garden or garden and old unnecessary tires? Then you simply must make a pretty craft. It will become proud of your site, if you do everything diligently and neatly. No special financial costs will be required for this, but you need to be time from a couple of hours to a pair of days.
We now turn to the consideration of more laborious options for crafts from tires. In fact, they are only a bit more complicated by the previous ones. You yourself make sure when you read the master classes.
We make swan
The manufacturer includes cutting, so it is better to take very worn tires with a longitudinal pattern. The first stage of work is markdown. Draw the Swan's neck on the tire, as shown in the photo. It should occupy an approximately half of the tire length. Further Dorisite the outlines of the head (length of about 10 cm) and beak (slightly shorter). The tail will begin where originates the beak, and therefore will have a split end. Make it the same width as the neck, and let it be about 30 cm.
Now it's time to go to the cutting. Depending on the state and thickness of rubber, work with the help of a shoe knife, a grinder or an electrolovka. Cutting on both sides of the tire is better to lead in parallel. After finishing cutting, proceed to turning the workpiece.
Swan from tire - master class The next step is to strengthen the neck and tail. To do this, along these parts, do two holes every 15 cm. In them you will be traded metal brackets that will hold hard rods. After that, the neck and tail you need to give a beautiful bend.
Final stage - Painting. You can make yourself either white or black swan. Beak let it be red. That's all.
Glamorous Vase
Previously, we considered simple colors for flowers from the tires for the gardening and garden. Now pay attention to a more complex and attractive option. Draw a gigzago-like line on the tire and make a cut on it. When finished, remove the bus on the offline. Sliced \u200b\u200bpart usually serves as a stand. Now take the paint for outdoor work Any coloring and place your vase to the end.
Tire Vase for Garden - Master Class Quiet lake
Today, people try to decorate their yards, summer cottages and gardens from what can only be. Designers received a lot of ideas that can be safely embodied in reality. The use of such girlfriend, like bus bu, led to the fact that real masterpieces performed by their own hands are located in the gardens and vegetable gardens.
It is worth noting that the crafts for the garden and the garden will be able to embellish any plot. It may even be a sandbox in the yard, flower beds, swing or beds.
For example, to make a flower leaf from a car tire, no need to guess. Just takes off the bus, the earth falls asleep. But it will not be a masterpiece. Now, if you take paints, decorate the bus from the outside, and even better - put three wheels - one thing - one thing - then the real masterpiece will turn out.
If you want to do something unusual, you can take tires of different diameters. From the biggest start to lay out the rubber.
You can even consolidate the improvised flower leaf on the tree. To close the bus on one side, you can use any material that will withstand the mass of the Earth.
Photo: Parrot from the tire do it yourself Fantasies came up with even two cups that are made of tires and stand on the site. The main bowl is cut, and the handles can be metal tape.
Another idea - Figures of animals from automotive tires. They will add mood to your guests on the garden or in the garden.
The most popular figure in Garden Crafts is a swan. To make a bird, you will need a tire in which there is no metallic cord.
It will be easier to cut rubber. We make the markup of our future crafts. We cut a tire a very sharp knife or hacksaw. To strengthen the neck of the swan, use metal bar. At the end of the bird stain.
From old car tires you can make a turtle, zebra and even a horse. To get a beast, you need to wear a bar in the ground along with the tire. To externally, the animal looks like "on themselves", it is necessary to give certain colors of paint.
On the cottage plot Perfectly will look at the furniture from automotive tires. You can even perform comfortable options using various soft linings. All that can be useful in this craft is applied. If you like to relax in the garden in the evenings, it is best for several personal chairs, which can be placed near each other near each other.
Differences in the manufacture of crafts can not be. Fantasize, and you will go no more than an hour. It is unnecessary to take thick and coarse tires that reinforcing fiber that can cause wounds.
Each of us since childhood remembers the swing from automotive tires in the garden. The pastime then did not do without a swing. Here and now you can make it crafts with your hands from old tires. It is worth noting that the child is safer than the whole swing from tires than from wood or metal. So, what do you need to make a swing from tires? First, we find a branch that will be durable and will be tilted to the ground. Secondly, we collect such tools: a knife, hacksaw, rope or chain and tires themselves.
At the end of the rope, perform a loop. You need to make sure that the knot is durable. Tire put vertically. The rope is passed through the wheel, firmly tied over the ground at the height of the meter.
Flower beds in the garden do it yourself True fun for children is the tracks and various paths that can be made from the tires of various sizes. You can make a conventional track from the tires on the plot. To do this, you will need large tires - for example, from the truck. It is only necessary to cut off the part with the tread, and then disseminate the strips on the site, additionally consolidated to the ground.
Photo: Borders for beds on the garden and flower bed 
Photo: Multi-level beds for strawberries 
Walkways in the garden with their own hands 
Crafts do it yourself - flower beds 
D. anyny master class will allow not only to inhale the second life in old tires, but also decorate your garden plot. Today we will make kashpo from old tires with their own hands.
1. We take a large sharp knife and, constantly wasting it with water, make symmetrical cutouts on a 2/3 (240 degrees) along the side ring, as shown in the figure. The protector and side part are cut at a distance of 1/3. In the most sides, using a triangular cutout, we separate the side part.
2. We have such a cut piece of the tire.
3. Soak it.
4. Cut the beak from trimming the side part.
5. Lower tires cut along the length. The incision must be a little more than the size of the beak.
6. We insert the beak and with the help of the clamp squeeze the halves.
7. Drill drill the hole and with the help of two washers, nuts and bolts, we tighten the heads of the head.
8. To make your head already, cut off part of the tire on both sides. It should turn out like this:
9. On the main side of the tires are placed chalk and cut out the tail.
10. This species has our workpiece. It remains to paint it.
11. From the iron strips, we make a clamp, with which we are tightened by the side parts of the porridge. If there was no iron strip at hand, you can use a solid rope.
12. Now proceed to painting the parrot. Use blue, yellow, black and white paint.
13. Color the parrot inside and outside. Side rings stain with black paint. If there are no black paint, you can leave them unpainted.
14. Coloring carefully head, we try to achieve maximum similarity with the original. Black stripes and eyes make a black contour.
15. The finished porridge from the tire should be suspended with a robust rope or wire to the horizontal design. And inside can be placed a vase with a beautiful plant.
Thanks Oleg Vashchenko for the provided master class!
A source
Flowerbed made of tires
Flowerbed from a tire or maybe more precisely a vase for colors from a tire, now have become popular, maybe someone will be interested in how to do it, so my master class or story about how to make a flowerbed from a tire.
For the flower beds there was a wheel from the car "Zhiguli"
1. We are planning the contours of the "petals" by chalk, trying to certainly observe symmetry:
2. Cut the petals from the methods tested by us the simplest and rather not time-consuming a knife with water was recognized. An ordinary knife to periodically dip in the water and does not rush to cut.
3. After all the petals cut out:
A source:
To do this, take the old bus - the older it will be, the better, since the erased protector is easier to cover with a smooth layer of paint and give our craft a more natural look.
The paint and a sharp knife will also be required, some are also used for cutting rubber Lobzik and Bulgarian - but when they are used, certain skills are needed, and it is also necessary to consider that when the tire is heated, it can start melting.
Before embarking on the cutting of the swan their tires, it is necessary to apply the contours for it, for which you will cut the items. You can think of your swan pattern, the main flew of which is the neck with your head and wings. We offer you the following scheme, which is relatively simple, but may further be supplemented with decorative details or additional cuts, slots, gear edges.
By making the necessary cuts on the bus, it is necessary to rinse well and desirable to degrease, and then proceed to painting - then it will laugh longer and will endure any weather.
After that, it is necessary to bring the wings of the swans, giving them the final form, you can also cut the gear edges of the wings and the tail so that your swan becomes very believable.
Also before painting it is necessary to fix the neck of the swan and give it the desired bending with the help of thick wire, which you disguise the paint.
And the final stage in the manufacture of a swan remains coloring his head and beak, you can also use other materials, for example, using the foam swan cut-cut in the form of a foam head, you can get a pretty cute swan, more similar to the present.
Well now your garden, the flower garden will decorate a wonderful swan. If you have a pond, then undoubtedly swan will become an excellent addition to the design and decoration of your reservoir and recreation area near him. And also, of course, the swan from the tire can become an excellent flowerumba - for this, it is enough to place kashpo with flowers in his center.
Crafts from tires with your own hands the phenomenon is common. The source material is durable, persistent, acceptable to handling at home, and there is no regular reception of worn out autocryls to the disposal at a more or less attractive price and is not foreseen. Masters-craftsmen are gifted, smart and sometimes of such an ignorable material like autores, create items quite aesthetic, see Fig. :
However, the purpose of this publication is not deepening in the subtleties of the rubbercore. Decorations and funny crafts on the site part of landscape design. You have to take it to decorative art or allocate in the independent type of applied Matrahm not yet decided finally, and in all applied arts canons is even less tough and more linked to practical needs than in the visual. Therefore, your "like - do not like" in relation to products from rubber in this case, the defining evaluation criterion. But, working with rubber, you need to have a clear idea of \u200b\u200bits properties - they have far from the aesthetic value.
The tire of a modern car is a complex multi-layered product. In general, it consists if you go from the inside out, from:
Note: In self-deserted tires between the inner and shock-absorbing-damping layers there is a layer of self-sewing elastic plastic.
So, the desired properties of the tread are ensured by the vulcanization of the raw rubber mass for it using the T. Naz. Ultravulkanizers. The most common of them is tetramethylthiouramdisulfide (TMTD). Yes, you are not mistaken. That Tiram or Tiura D, not less than DDT. As a rat poison and insects, he seemed to be completely out of use due to the fact that it has a cumulative effect, fraught with very bad long-term consequences. But the safe replacement of Tyuram in the rubber industry is not yet - its analogues, if better in technological terms, then more expensive and no less dangerous.
In the comments to crafts from tires, you can find questions like: how to get rid of the smell of tires? But things from the rusty and food rubber tires do not smell. It is the same Tyram. It is flying: sublimates, turning into a gaseous state of solid without melting. Of course, if you take a tire with your hands, nothing terrible will happen. But regular contact of the surfaces of the body or its stay in residential and / or poorly ventilated premises is extremely undesirable.
From the old worn tire tiura is not caring. But the mass of rubber from remains and gradually expires outwards. Therefore, first, from among the crafts from the tires, it is necessary to unambiguously eliminate any furniture and accessories for children's games, during which the touch of tires are inevitable, pos. 1 and 2 in Fig. Busy elephant on pos. 2 This is generally bad: after all, the bastard will be regularly lying on it, from whose disorders then adult life will not be in life. Gaming equipment from tires should be done so that I wanted to walk with my feet and only occasionally touch the palms, see below.
Secondly, pendant swings for children and adults. As for terrestrial balancing swings, on software. 3 Unsuccessful sample: On it friction of naked skin skin about naked rubber is inevitable. Swing on pos. 4 will be harmless if the steamproof painting of rubber surfaces (for example, acrylic enamel for outdoor work) will be regularly updated.
Tires for different conditions Operation is quite different in mechanical properties. It matters to form the appearance of crafts from them. Whether it will be possible to give the desired shape of the product from the tire depends, firstly, on whether it is summer or winter. Summer rubber is tougher and more difficult to handle, but it is better to hold the final form. Winter - softer and more elastic. Secondly, from Cord in the tire: steel, radial or diagonal or kapron - radial, diagonal or cellular. From the type of cord, it depends on how the opened tire unfolds and which it will take the form if the workpiece is turned off. Change the resulting form at home is impossible.
Note: Tire turning for the manufacture of crafts repeatedly reduces its harm, because Rubber internal layers of tires are vulcanized by other, more safe waysthan protector.
In general, the crafts from the tires can do this:
About spacing for colors and berries from tires. In this, we turn to the rest.
In business crafts from tires, its high resistance, elasticity, the ability to absorb mechanical loads and the tread grip almost with any surface are applied to the fore. In some cases (everything is poison and everything has a medicine), even such a muck as a vulcanizer pair can be useful.
For example, on pos. 1 Fig. Below the upholstery of the extraterable wooden staircases or basement staircase allows you to build an election staircase (which you can climb / descend the cargo by both hands) with a slope of up to 55-60 degrees. Reducing the separable staircase useful Square It may be decisive for the planning of the whole structure. Part of Tyurama vapors will penetrate into the wood and will remain there, additionally, a prevention tree from rotting. And if the step is broken under the leg, the end-to-end failure is not formed and the probability of severe injury is reduced repeatedly.
Upholstery Niza walls, eg, shed, a wide plinth of the tire (pos. 2) on only protects the wall from mechanical damage to a garden tool. At the above reasons, the probability of penetration into such a wall of pests and mold is also reduced repeatedly. In the unheated room it is very important. Well, the use of tires for homely cannon (pos. 3) No comments require.
The drainage well or waste pit of the tire cause is more than doubtful: in the resulting ring hollows, malicious sucks accumulate, get rid of which is very difficult. Because of this, septic tank with an active sludge in the shell of tires quickly dies. But the tire as the lower belt flapping belt of a decorative mini-reservoir (pos. 4) a special question. To land the most beautiful aquatic plants, the depth of the reservoir must be significant; In any case, more than the regulatory depth of the primer of the soil in this place (NGP). With increasing depth, the gravitational pressure of the water and its leakage into the ground is growing. At the same time, the lateral flow from the reservoir may increase to the underground soil blur with all unpleasant and unnecessary arising. A shelter from the tire sends a leakage down. Then, on the contrary, the coaching (coolant) of the bottom soil increases - its seal under the pressure of the water and tightening the pores with a dense il. The reservoir quickly begins to keep water, and the biological mode in it is also installed faster.
Note: Any tires are cut with an electric bike. Tires with a kapron cord can be cut by a sharp knife from tempered steel. Tires with steel cord manually cut with a metal with a removal of the end of the canvas, see fig. on right.
On pos. 5 Not just a staircase from tires. It is built in the promone, eliminated which no other methods managed. Thanks to the filling of tires, rain erosion has stopped in this place, and the whole stock and slopes have stabilized. In this case, the elasticity and high storage stability played a positive role: you can imagine a tire blurring with water? And since the tires are formed with a solid waterproof coating, then the surface runoff does not need to be concentrated somewhere near - it can dispersed and become safe. Therefore, the danger of a landslide of the cliff for the improper retaining wall From tires (pos. 6) is extremely small in any geological conditions.
Beautiful original pallet Be sure to attract the attention of children. And will make a desire to play on her or with her. It is not necessary to prohibit and discourage - why offend and inhibit natural interest, it is harmful to him (her). But - Autoresina! It is better with her if child attention is limited to looking at. If the game has gone, so that they do not choke with all the body, and more feet.
Technologically, the easiest way for this is to provide a figure from a solid tire of the neck and head, see fig. You can not slide forward - the neck bothers. Not his own, her. Ride back, from where it is uncomfortable, you need to turn on the patch. On the neck of the figure you will not be afraid - deep narrow failure interferes. Permissive elephant remember above? He has a failure between the neck and the torso smaller and the sewing. You can sat down tightly and turn around to move back - Avosiusiyin.
Diagram of the device of the simplest figure from the tire with the additive, unsuitable for rabid playing, is given in Fig.:
It is best to look at this version of the figure of long-haired animals, pos. 1-3 in Fig. below. The pole from the noble material reduces the visual utility of the tire, even if everything is painted together together. In this case, it gives its shape in this case, and the pillar, the more not quite even, creates an imaginary asymmetric circuit along with it. If there is no suitable trimming of a log, a short chumbach is suitable for the neck, and a plastic bottle, pos. four.
You can "smear" too clear the circuit of the tire and just head without a neck if you choose a suitable prototype of the figure. Elephant on pos. 5 Unlike that, above, not only does not contribute to unsuitable games (others proportions), but also looks agrees. By the way, the pattern of his head is designed on the basis of the pattern of the swan swan figure, see below.
On pos. five - original solutionapplicable where the figure is not foreseeable or considering it from there uncomfortable. Flat plywood head and tail look out of the limited area, too, well, and the tail does the figure perceived only visually.
The "principle of the head" is used in such fairly popular crafts as snails from tires. For their manufacture of tires, both round sidewalls are cut out (they can come in handy on something else), and a corrugated band is in business. For the manufacture of snails, tires with a kapron cord are suitable: the corrugated band of them is turned into a spiral itself. From such a summer tire, it turns out a high shell snail (pos. 1 in Fig.), And from the winter with low, pos. 2. The head and other case is maintained by a curved pin of 6 mm wire-rods. The strip of the tire with steel cord inside out will not turn out at all, and the snail will come out of it somewhere like on the pos. 3.
Minimize technological operations with rubber (enough labor-intensive) and make figures attractive only visually, by making them from several tires. Obvious option - Figures from tires Torch, pos. 1-3 in Fig. below. Their modules are bonded by segments of the same rod. Painler painted inserts are attached by self-draws. Hands / paws - from a strip with steel cord (pos. 2) or, more flexible, with Kapronov, pos. 3.
A decorative figure of solid tires can be collected and lying, applying the "head principle" in combination with something foreign rubber nearby, clearly giving know: they do not play here. And if they play, it is neat. On pos. 4 This is a mini monoclumba solitator. Do not be frozen on the "solitator". Literally, this means "lonely", "the only one." The monoclumba is planted with one type of plants, and on the monoclum leather soluters are only one.
Note: Tires in a simple decorative figure can be folded in advance, lying and end, pos. 5. Revip the face of the face, applying the simplest receptions of the tire cutting, pos. 6.
The simplest way to cut the tires - in its sidewalls to make diametrically opposite triangular cuts. Then the tire is flattened across using a rope loop and a stick-gate and the cutting edges of the cutouts are fastened with self-strains, bolts or brackets made of thin soft wire. If the outer bending of the corrugated band is needed sharp, it is cut to Cord. In this way, for example The base of the fish from the tire, see fig. on right.
A little more work will be required to cut the corrugated stripes from the tire pair. But they will go not only on snails, paws, etc.
They cool them cool, but it's inconvenient to fall on them, and it will not work out from the crocodile on the fifth point at all. For video, see many options for crocodiles from tires:
More work is required to cut out of the tire not round sidewalls completely, but only from the heel (technical term) - internal thickened parts that the tire sits on the wheel drive. But the inner thin edges of the resulting trimming can be reduced and sewed by receiving a sleeve. The most resistant to the transverse deformations of the sleeves, at the same time sufficiently flexible it includes, out of tires with a metal coordinate. The desired longitudinal bend is attached to the rods or pipes inserted inside. Thus, it is possible, for example, to make a bulk turtle a much more convincing species, see fig. Right than turtles from tire trimming. The latter is generally simply styling under the turtle and therefore more suitable as the basis of mini-flowers from the tire, and the bulk sleeves will go even at the boys, caterpillars, elephant legs, etc.
The possibilities of the complex cutting of the tires on the induced contour are conveniently demonstrated by the example of such a popular craft like a tire swan. First, the swan of a species is obtained from the tire for any season with any cord. Secondly, how the game belonging of the swan from the tire is not suitable. Thirdly, on the basis of a swan pattern, many other different figures can be made and / or their details.
The marking of the tire for the manufacture of swan and the scan of the pattern is shown in Fig.:
Pay attention to the dried parts of the scan - they will soon be useful for us. The species cut out in this way (in the right bottom) gives an idea of \u200b\u200bits capabilities: modifying markup, you can get 50 or more varieties of swans from the tire, see Roller:
However, any desired swan is obtained from any tire. What exactly will be done and for what it will be more suitable, depends on the type of tire (winter, summer) and its cord.
Forming a swan figure in any case is carried out by inserting a rod; Its location is shown for pos. 1 Fig.:
But the wings will not only appear if desired. From summer rubber with metalocore, you can make floral flowers (portable flower beds), stylized under swans, pos. 2. Also from the summer tire, but with a Kronov cord (better - cellular) overlook the swans with raised wings, pos. 3. Arc wings swan from winter rubber With radial cord (better - steel) can be made by cut, and wings are submitted, pos. 4. If the Cord is a kronovy, then cut the arcs of the wings are impossible (pos. 5): the wings will soon devote themselves before they suggest to the sides of the shape.
The pattern of swan from the tire is almost universal for this type of product. On its basis, it is possible not only an elephant's head, but the figures, the birds related very remotely. But let's start yet with those that closer.
In order to get instead of a swan rooster (Tetherov, Pheasant, etc.) from the tire, pos. 1 In Fig., You need half the rifle strip of the tread to be placed in length in the proportion of approx. 1/3: 2/3. Most of Cut, turns over, it will be tail. The residue is cut along, a head is formed from it. "Hanging" parts of the sidewall are rejected and the bends are supported by the rod - it is wings. The tire is preferable to take winter with radial or diagonal cord (better - steel).
For peacock or heat-birds (pos. 2) on the sidewalls make 3 outbreaks in 3/4 circumference. The continued parts must be located in pairs perpendicularly. The first 2 cuts lead closer to the corrugated part of the tread (it will be wings), and the inner 2 at the heel itself. From the fill of one part of the sidewall with the "skirt" is formed a head. From another tail; His "skirt" is cut by feston.
Flamingo (herds, cranes, storks, marabou) from tires, pos. 3 and 4, the form is quite a bird, as far as the source material allows. But no wonder the one that is pos. 4, causes associations with a flying crocodile from the ACTECTOV: Crops flamingo from the Crocodile tires, only the billets are shifted along relative to each other. On one protruding end, the head is cut out; On the other tail. For flamingo on pos. 3 need a winter tire (preferably with cellular cord); The one that is pos. 5, it turns out from any. How to make flamingo from a tire, see also the plot:
Of course, all the described methods of cutting and assembling decorative crafts from tires are applicable and together. One example of what can be achieved by their combination is given in Fig. on right. The turtle shell is obtained from a cut round sidewall of a soft tire with a radial or diagonal cape cord, stretched to the overhead wheelbone and twisted. If you cut a blank from the same tire for the shell, but with a cellular cord, its edges bent down-inside and the shell will be more convex; Then it will need to make cuts and tortoise legs.
And here bat From the tire, see the next. Fig. On the right, already a completely original creation for which the mild tire is required with cellular cape. And technologically very complex:
To manually, at home, to get a spectacular craft from the tire in this way, non-serve ingenuity is needed, preferabity, accuracy, steel nerves and iron hand. But - the result is obvious.
The desire of a person to decorate the territory of his cottage, to create a wonderful, cozy environment with the use of things under hand, contributed to the emergence of a set of designer ideas.
The original material for the implementation of extraordinary ideas is old automotive tires.
Entertaining crafts from tires for the garden will decorate both flower beds and playgrounds for games and paths. Tires and tires can be used not only to create elements of the garden decor, but also for practical purposes - you can build a swimming pool, furniture, swing, sandbox, parking for bicycles.
Below in the photo presents extraordinary ideas of crafts from tires.
The easiest scheme - we take an unnecessary tire, fall asleep into it the soil and planting plants. Of course, this will not be a unique decorative element of garden design.
To fix everything, we take bright colors (acrylic or oil-based) and paint the tires. Next, put them on each other, getting a multi-tier flower leaf.
The original solution will be the vertically located flower bed, folded in the form of a pyramid. I fall asleep inside the soil and plant curly flowers - petunia or strawberries. From above, you can put a pot with a single plant.
From the tires you can make a suspended flower leaf. To do this, you will need a steel chain - it will have to be attached to the tire and hang the entire design on the tree.
In order for the soil not waking up, the bottom of the tires is closed with a dense sheet of rubber or other suitable material.
An unusual solution will be made of flower beds in the form of a kettle and cups. You only need a few tires and trimming metal ribbons and pipes.
Another kind of crafts from tires for the garden and the garden are a variety of unusual and intricate shapes from tires. They will revive your garden and enhance the mood to all households.
The swan figure is very popular. To make it, it will be necessary for a tire without a metal cord. It must be preloaded.
For cutting, we use well-sharpened knife. Swan neck fix a metal rod. The final stage will cover the resulting product with white or black paint (depending on what swan you want - white or black).
It is enough just to create a funny horse, zebra or giraffe. Such figures will require installations in a soil of a wooden bar of medium size along with a tire.
Collect crafts should be painted in colors that correspond to this or another fauna representative.
Old tires and basins are easy to turn into a frog or a cute turtle. Tholik fantasy will help make interesting and unusual installations.
Furniture objects made from tires will be perfect in the garden.
They can be done in different styles and using different upholstery materials, ranging from leather and textiles and ending with the vine and wire.
From tires it will be a comfortable chair, which will be wonderfully resting on the lap of nature. To do this, we take the tires, turn them with their interturbed straps and ribbons. It does not take much time, and the result will be entertaining.
Making furniture for cottages can be made of medium and low hard tires.
From the tires, beautiful tables, ottomans, chairs, chandeliers, fountains and washbasins are obtained.
Swing is an integral part of any playground. Tire swings are safer than wood or metal. They are simple enough.
You will need:
The end of the rope tie into the loop, the nodes must be strong and reliable. I throw a loop through the branch, we skip the rest of the rope through it and delay. Tires put perpendicular to the ground.
We skip through them the rope and crepim at an altitude of approximately 0.9 m from the earth's surface. Swing are ready!
Forestly and originally watch paths created from unnecessary tires, or rather from their protector.
We bring to your attention a selection of photos of various crafts from the tires.
Tires are universal material to create a wide variety of things with their own hands.
Numerous master classes of crafts from tires can be easily found on the Internet. Therefore, if you have fallen unnecessary old auto strokes, boldly let them in the case, creating memorable elements of the garden decor.
The idea of \u200b\u200bArina, as a garden figurines with their own hands from such a simple material as mounting foam.
To make a frog you need:
| 1. Pour both containers mounting foam and dry. | |
| 2. Create the body and head with wire. Studs, sticks ... you can use everything. Secure foam. | |
| 3. Insert the wire into the location of the alleged paws. Form the paws. | |
| 4. Apply foam on the paws, extremely carefully, gradually with intervals for drying. | |
 | 5. Paint the figurines for the garden with your own hands in the right color. Stick eyes. |
And what kind of bear without hive honey. Made a hives, and even with bees. Bees made of testicular containers from kinder surprises (nose-toothpick, plastic bottle wings). Well, the fifthog was requested to the Winnie Puhu. Spilly near the tree, and I slowly pulled one breve! Husband saw and here you have a patch, your own person !!! Paws and Vinnie and Pigchka cut out from the residues of linoleum, painted and the stapler searched! In general, this company turned out !!!
Yes, I forgot to add, I still made the Swan Lake!
A resident of the Rostov region made a decorative swan, Aista, Flamingo and a goose from a very unusual material - from automotive tires. It all started with a textbook and a pair of used wheels. Galina Goncharova came to mind the idea with the benefit to deal with unnecessary trash. The entrance went scissors and nails. Now in her garden you can learn chapter about bird biology birds.
Rubber pink flamingos, stork, swan and goose now live on one territory. One bird used to leave all day. Now the master works with tires what is called "from the wheels". Swan comes to life in a couple of hours. Despite the fact that there is no place in the garden for the future of Dyatla and Owl, crafts for sale do not go - Galina Goncharov only gives them. Says, the hobby is just for the soul.
"The TV is one murder - the same thing. And you will do it and admire. I did not notice how winter was flying," explains the needlewoman Galina Goncharov.
After successful use of Tire Galina Goncharov, I realized that it was possible to work with everything that would go under the arm. An example of this is a gold candlestick. It looks very romantic, and in it there are three bent electrical pipes, three tubes from bottles of vodka and one at the base is an mayonnaise cover. Recently, the master often calls and come to visit the neighbors - they ask for opening the secret of the junction of the goose. It is very simple: cameras should be without cables, then it is easier to pierce. There are special chambers without cables.
The highest product in the courtyard is a family of storks. They are most of all benefits - work as speed limit signs. Previously, the fence was constantly shot down at huge speed - the drivers simply did not fit into turn. But as soon as storks appeared here, everyone began to slow down in front of the masterpieces from the tires.
www.dontr.ru.Well, I finally finished my duck (or rather the spleen) !!! Well, I suffered with her manufacture !!! At first, all cement mass fell off from the foam basis, then I, like IdeidetSploshad, broke her, unhappy, head. And under the curtain, my little helper broke the poor duck beak and tail.
But I really wanted to bring the whole thing to the mind, and we began to reanimate this halfuparime. Two long nails stuck in the broken head and put it on the body. Three nails are smaller in the beak and the tail. It turned out a terrible monster. But it was already difficult to scare me and I continued !!! Divaled cement mortar knew all over the construction from above. A little waited until the solution slightly grabbed.
Then he made a solution rather thick and began to make small lumps from it and stick them to the workpiece. Special attention paid to the beak and tail, trying to give them the form. Here I poured the solution directly to the nails. Purples all the duck and cooled from above again with a liquid solution.
She covered its product with a plastic bag and left overnight. In the morning, the package opened and, about a miracle! - nothing fell off !!! Again closed the package and left on the street for another two days.
Two days later, with fear I took my ice in my hands. What a joy!!! Concrete froze and turned out quite well (especially for the first time). It remains to do paintwork. Well, it was already not difficult. Painted with their favorite acrylic paints With the addition of calves. And today my handsome spleen went in swimming in my stone lake !!!
Merry Amanitors and Swans
Giraffe, Zebra, palm trees on which coconuts grow
Couple of funny flower beds
Children like animal figures come even from other streets to see and play near them. Adults approve the idea and are interested in what else will be on the site. There are many ideas, there is not enough time. Many thanks to everyone whose ideas were useful in the manufacture of swans, giraffe, zebras.
And our idea of \u200b\u200bthe turtle - flower beds
For the manufacture of a turtle, a tire is needed, a tire protector that is cut into 4 parts, a piece of plastic tube for neck, newspapers and skill for the head.
In the coat on the sidewall, cuts are made in which the pieces of the tread (paws) are inserted, a small protector trimming is useful for the tail. Paws and tail are fastened with wire brackets. From the newspapers a head is formed and attached to scotch plastic pipe. All this design is inserted into the incision and fastened with self-drawing. After painting, eyes, nose and mouth are drawn. Everything else is your fantasy.
Hope they like. Well, now and everything.
Here is a turtle! The basik asked to the garbage - the bottom burst, and the handles long ago fell off. Now, thanks to him began new life!!! By the way, the bottom cut out with a grinder (it would be better if the junk, but he died suddenly), and then the edges had squirting the edge with a simple knife.
It is a pity that everything is not enough time, because Improving all these ideas to me personally, with one of my girlfriend. But but I already mastered almost the entire tool! It remains to learn how to work by chainsaw. But after all, as they say, everything is in our hands, right ??? !!!
If someone decides to make a leaf ... 4kg cement took it. The leaf of the burdock is approximately 40 by 50 cm.
Step 1
Thug down the leaf, rhubarb or another plant. Sheet to put in a bucket with water.
Step 2.
We cover the cell on the table, we make a slide of wet sand, in the middle we make a hormick slightly higher to ask our leaf - depth. Cover our slide cellophan. Unpat the leaf with streaks upstairs, straighten it. If there are holes on the sheet, just tear the pieces of leaf from another sheet and cover them.
Step 3.
We knead concrete: 3 pieces of sand, 1 part of cement, water. The solution should not be liquid, so as not to flash (not climbed) from the slide. We put cement on the sheet. Concrete thickness in the middle 2 cm, with a gradual decrease to 1 cm to the edges.
Cover the cellophane in case of rain and from the heat. It is not necessary to close tightly cellophane, leave slots for ventilation. IMPORTANT!!! Leave the product for 2 days! If it is very hot, I advise you to sprinkle a sheet with water.
When the product rises gently turn the sheet, carefully remove the sheet. If it disappears with difficulty, you can slightly moisten, and it will easily move away. Sleep the garbage with a soft brush. I painted with a varnish for yachts with the addition of a yellow spike. Not quite a bitpage, I cried with varnish. When the interaction of a low concrete and a varnish for yachts, it turns out such a beautiful result..
Yes, I almost forgot! It is important! Better cutting to cut completely. When you clean, clean the sheet - the hole is formed. I had to close this hole with glue for tile tileAfter inserting a wand.
Unfortunately, these photos have for a very long time and I can't indicate the author of this photoerok, so if you know where the photo from where you help find the author.
1. Place the tire, then pickled a tire along the lines in the photo (it is simple enough if the knife is sharp) - depending on the tire you will leave 10 to 20 minutes.
2. Then call the husband, so that he to chisel or the grinder interrupted the hardest part of the tire (photo 2) - it will be a head and tail "Swan" - another 5 minutes.
3. Turn the tire.
4. If you do in kindergarten - Do not forget to handle the head and tail, because children can easily scratch
5. Pray to the swan, by the way, the swan "bronze color" looks very beautiful.
For a start, we take old auto strokes, better "bald", from "Zaporozhets" or Zhiguli and make a chalk lines of the cut as in Figure 2.
In order for the head and neck with the breast, we sat beautifully put the shape, we used an elongated stainless steel plate. They arched her, giving her the shape of the head, neck and breast of the swan, and fastened to rubber with imperceptible small screws. Well the plate and the resulting "cutting" can be seen in the photos below:
From rubber cut eyes and attached them to the head of the swan also with the help of screws. And after that, twice covered our swans with white water-emulsion paint, only the noses made red.
We installed swans in halves of covers painted in a blue color. As if our swans float in the pond!
Will out the chalk line of the cut, the tire is better to choose the "bald".
Step 2.
For the first end, use a very sharp knife. If the tire is sufficiently soft and does not contain steel fibers, there should be no problems. Next smoothly cut out the lined line.
Step 3.
When you finish the incision - remove the top part
Step 4.
Start turning the rone from the tire inside out.
Step 5.
Declaring the surface and paint the flowerbed of the tires on their taste
