It is required to choose from the criteria of a rider and a special scale. The flexibility affects the style of riding and terrain. Incorrectly selected stiffness can adversely affect the athlete when driving at high speeds. Therefore, you need to know the rules for choosing manually and style.
Hardness refers to the main characteristics. The indicator affects comfort and speed when riding. Soft helps smooth the relief track. The rider will be comfortable landed on ice slopes. At the same time it is impossible to ride at high speeds. Therefore, the hardness is marked in a scale of up to 10 points. In this case, the figure may be the same from different manufacturers, but the characteristics will differ.
Athletes or newcomers should be focused on the next degrees of hardness:
This indicator depends on the level of professionalism athlete. For unsure athletes acquire inventory with soft or medium.
The following types of hardness affect the choice:
Attention! Select the inventory will be required manually. To do this, press the center of the product. Thus, twisting is checked.
To find out such a characteristic, you will need to carry out a small study with two different snowboarding. The first take from the category with solid, and the other from the category with soft. Pay attention to the numbers listed on the product.
After selecting additionally check for hardness. Take the gear with one hand in one end, and the second end is lowered to the floor. The inventory should be located approximately 45 0 from the flat surface of the floor. Put in the free hand in the middle or in the waist area. The same procedure will be necessary to spend with the second board. Based on sensations, you can understand what equipment is softer, and what tougher.
Designations for equipment characteristics are highlighted in the table:
Several assignments isolated:
The universal board is designed for a beginner. It does not need to choose a flat surface. The inventory will well cope in the snow-covered area. Stiffness starts from 5 points. This indicator allows you to keep other features in the balance sheet. For a rider, a universal inventory allows you to study easy tricks. In this case, the landing will be soft. The stiffness of the universal board comes to 7 points, that is, suitable for professional riding. Therefore, in the Allmountain category you need to pick up equipment under your strength and opportunities.
For use soft type. The style lies in the descent on the winding track, where you need to withstand accuracy in, performing and tricks. Do not choose such an inventory to drive at high speeds. Equipment will be unstable on the track, which can lead to the injury of a rider.
For the style of slalom (at high speeds), it is required to purchase boards with a characteristic up to 10 points. Solid snowboard helps to accelerate faster. In addition, up to 10 points you need to choose when skating carving. Slightly choose stiffness. Here the indicator is in the range of 7-9 points. The skill level in such styles should be high in order not to get injured.
To learn stiffness, look at the label. Then compare the two identical characteristics in different models. When choosing, consider the riding style. For a beginner choose universal gear to learn to perform tricks.
A good "board" is half the Snowboard Success. How to choose a snowboard to confidently feel in the mountains and always control the speed of the descent?
It is necessary to take into account your own experience, age, anthropometric parameters and riding style. Remember, an experienced person will not suit the same border as a newcomer, so it is important to choose a board that will be the best for you.
Winter sports ever compete among themselves. Not sure what would like to do? Do not know what to choose: Ski or snowboard? The dilemma is complex, between alkaline skiing and board to decide really hard, but we - for the board, because:
Did you decide to try your hand on the board? Now it remains to learn how to choose a snowboard for growth and weight and other parameters.
Pick up the board with considering:
Other features, like the shape of Kant, bending and the material from which the board is made are not very important for non-professional riders.
On these characteristics, it will be possible to emphasize the attention later when you learn the basic tricks and share the riding, but before that the selection of the board over a large number of parameters only confuses you.
Variants are set. Someone from the famous riders prefers to check the size of the board, putting it vertically: in a similar position, the board must reach the chin (for a universal board) or to the nose (for high-speed descents on the soft snow).
Someone calculates the perfect size through cunning formulas. We suggest you use the tables.
| How to choose a snowboard for growth and weight for freeride? | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Weight, kg) | Growth (cm) | 150 | 155 | 160 | 165 | 170 | 175 | 180 | 185 | 190 |
| 50 | 135 | 140 | 145 | 150 | 155 | 155 | 160 | 175 | ||
| 55 | 135 | 140 | 145 | 150 | 155 | 155 | 160 | 175 | ||
| 60 | 140 | 140 | 145 | 150 | 155 | 155 | 165 | 175 | ||
| 65 | 145 | 140 | 145 | 150 | 155 | 155 | 165 | 180 | 175 | |
| 70 | 145 | 150 | 155 | 155 | 160 | 165 | 180 | 180 | ||
| 75 | 150 | 155 | 155 | 160 | 165 | 180 | 180 | |||
| 80 | 160 | 160 | 160 | 165 | 180 | 185 | ||||
| 85 | 160 | 165 | 170 | 180 | 185 | |||||
| 90 | 165 | 175 | 185 | 185 | ||||||
| How to choose a snowboard for growth and weight for freestyle? | ||||||||||
| Weight, kg) | Growth (cm) | 150 | 155 | 160 | 165 | 170 | 175 | 180 | 185 | 190 |
| 50 | 120 | 125 | 130 | 135 | 140 | 140 | 145 | 150 | ||
| 55 | 120 | 125 | 130 | 135 | 140 | 140 | 145 | 150 | ||
| 60 | 120 | 125 | 130 | 135 | 140 | 145 | 150 | 150 | ||
| 65 | 125 | 125 | 130 | 135 | 140 | 145 | 150 | 155 | 150 | |
| 70 | 130 | 135 | 140 | 140 | 145 | 150 | 155 | 155 | ||
| 75 | 135 | 140 | 140 | 145 | 150 | 155 | 155 | |||
| 80 | 145 | 145 | 150 | 150 | 155 | 160 | ||||
| 85 | 145 | 150 | 155 | 155 | 160 | |||||
| 90 | 155 | 160 | 160 | 160 |
It is necessary to determine it in the widest place in the center of the board. Optimally, when this parameter matches the width of your shoes. Excessively narrow or, on the contrary, a very wide snowboard is hard to control, it enters.
Everything is simple here: directional boards are suitable for Frearyda.
They, as follows from the name, can move only in one direction, since the shape of the nose of such boards is very specific, and the tail is more rigid.
If you think about the question, how to choose a snowboard for beginners, it is worth staying at the most universal version: Twin Type or Twin-directional Bord.
Twin type of boards is symmetrical, the tail and nose they have the same shape. Suitable for searching for "your" skating style and freestyle.
Twin-directional burgundy nose slightly longer than the tail, it provides comfort, high speed with descent and stability. Even if you are not played too well with a board, you will not have problems with twin-directed.
It should always be remembered that the chalkboard characteristics are largely dependent on the manufacturer and even from year of release. LIB Tech and K2, as well as other manufacturers, will be different from each other with the same scale. So you should not focus on the averaged parameters. Snowboard length and other indicators need to be viewed separately from each manufacturer.
Very novice in riding? Then it is better to give preference to a universal board, the main thing is to choose a snowboard for growth and weight so that it fit you perfectly. Subsequently, when you get experience and understand what style fits you more, you can change the board.
More experienced rides, of course, should be closed to boards suitable for a specific riding style. After all, the features of the shape and structure of the board are very strongly affected by the rate of descent and the possibility of performing different tricks.
Do not like well-kept slopes, on which there are a lot of people? Freeride is your option.
He involves riding among the trees on a rather soft snow cover, so the board, suitable for this style of riding, should be rigid. This will provide stability. The mass and weight of the body will be evenly distributed on the board, and skating will be safe.
How to choose a snowboard size in this case? The length of the freeride board should be a few centimeters to exceed the length of the standard universal model, usually suitable for you. The advantage in length will allow to maintain a steady position on the "wild" snow and maneuvering between trees. It is better to give preference to models with bent noses so that they do not "stick up" in the snow.
Great boards for lovers descend along the long slopes, slide on soft snow or perform tricks on the tramplines. Mountains, parks, any snow. In a word - a wagon.
Actually, if you are a very green newcomer, select Ol Mountin and probably you will not lose. Board design allows you to experiment with riding styles.
Boards for those who appreciate steep tricks. If you do not wait to try yourself in freestyle, remember that the length of such a board must be somewhat less standard - it provides good handling. In addition, flexibility and softness should be at the height. Thanks to this, the snowboard will remain as much even after shocking and collisions, inevitable during freestyle.
When selecting a model for a child, the same rules for determining the ROSTOVKI, as for adults. Children's snowboard is usually much softer adult. This makes it possible to kid until it is too well coordinating movement, calmly control the board in any situation.
In no case can not buy the board "on the grown". It causes inconvenience to a child who will not be able to properly cope with the bord, which will slow down learning. In addition, the acquisition of "on the grow" is simply dangerous.
ARBOR WESTMARK Snowboard
Easy to control thanks to a special curved form with a balanced case and excellent stability. This board is simply ideal for learning. Getting on it, you can master skating even without any special courses.
Plus models: Huge opportunities for the growth of the Ridera; relatively low price.
Minus: Lovers of fast descents will not suit, because at high speed begins to vibrate very much.
Price: Approximately 25 thousand rubles.
People who want to do snowboarding, certainly faces the question of how to choose the right snowboard and the necessary equipment. To this choice, it is possible to take the most seriously as possible so that skiing does not cause a sense of discomfort and did not lead to injury, but on the contrary, brought joy and presented a lot of positive impressions. Therefore, let's figure out how to choose a snowboard for beginners.
Snowboard (eng. Snowboard) is a sports projectile that is designed for high-speed descent from snow-covered slopes. It is a flat board with curved ends, which consists of the following elements:
Kant provides the best grip with a snowy surface during turns and serves to control the snowboard using receptions called "deletion".
To properly choose a snowboard, you need to know the main selection criteria. Snowboard boards differ in form and rigidity. Beginners are best suited for the minimum snowboard stiffness. With a "soft" board easier to learn, it will more smoothly behave on the track and forgive many mistakes. But in the future, the more confident you will ride, the more harsh board you will need. Snowboard selection will also depend on your weight, growth and riding style.
On the snowboard always indicates the style under which it is oriented. It may be indicated at once several styles. It will not be superfluous to know what exist snowboarding styles:
Types of racks differ only to what leg you are in front:
The selection of the rack does not depend on whether you are right or left. To determine the type of rack, you can, for example, slip in the shoes on the ice: a leg, which is more convenient to keep in front - presenter. By the way, skating in the return rack is called "SWITCH".
The smaller the width of the snowboard, the easier it is to manage it, to register. The width is more, the better it behaves on the unprepared highway and with a flat leading. Pick the width in such a way that the sock does not duplicate the edge of the board for more than 2 cm. If your shoe size is more than 44th, look for a board with a "WIDE" mark.
When choosing a snowboard, first consider the main parameters and only then look at the design.
In a good way, the sequence of acquisition of equipment should be as follows: shoes, attachments and only then the snowboard itself and everything else.
Snowboarding boots are hard and soft. Rigid consist of an outer plastic design and a soft inside. In soft boots, the outer part has insignificant rigidity. Novice snowboarders better choose softIn addition, they are cheaper.
Boots are the most important detail of the snowboard kit. If possible, you need to choose the best on the quality of the model and save on their purchase should not be. Boots are recommended to acquire the first at least for the considerations of hygiene, because this is the most individual thing. Choose such in which the inner part can be removed to dry or wash. Snowboard boots should be very comfortable. They protect the muscles and ligaments of legs from strong fatigue and damage. They are purchased for a long time at least for several seasons.
When choosing, first of all, it is not necessary to navigate the brand, but on the convenience. The size of the snowboard boot corresponds to the size of ordinary shoes. It is necessary to pick up shoes, ideally suitable for your feet!
The main task of fasteners is to securely fix the legs of the rider on the board. The more reliable fixation, the better the handling and less risk is injured. Fastenings are selected under shoes, but not vice versa.
Types of fittings for snowboard are the following:
Newbies are suitable for medium stiffeners. If you get fasteners with a snowboard, that is, it makes sense to make specialists installed them right in the store. With experience, you will understand which attachments you want: what improvements are needed, and which are useless.
Do not buy an expensive snowboard at once. First time take a snowboard rental to decide whether you will do on it. After all, the very first snowboard riding hours often cause incomprehensible or even contradictory sensations. And when will be 100% sure of the desire to continue, then you feel free to plan a snowboard purchase.
It is also not necessary to break your head over how to choose a snowboard and for study, and for subsequent riding. When you learn to ride steadily, then you can better understand what you need. Snowboard prices for beginners make up about $ 100 to $ 300.
When you choose a snowboard, do not be lazy to examine it for chips, detacies, scratches. Also, carefully check the Kant. On the new snowboard damage should not be. In the second hand, they may, so before buying it is better to consult with a specialist. Especially since the newcomer may not recognize the "killed" snowboard, which has passed a lightweight redecoration.
Male and female boards differ in both design and appropriate labeling.
After the entire kit is assembled, it is desirable to buy a board cover, a ski mask or glasses, as well as helmet and protection.
Those who dream to learn how to ride a snowboard, understand that it is better to purchase your own, which is constantly renting on the resort and spend extra money over the years of operation. How to choose a snowboard for beginners?
You do not know where to buy your first board? Buy snowboard in the sports store, via the Internet. From the article you will understand what you need.
Consider how to choose a snowboard, when you start a snowboarder.
Newbie should determine for himself, in what style he wants to learn to ride. For example, freestyle, or freestyle, when various tricks make on the board. On the snow ramp ride in the style of Alf Pipe.
Freeride, or Freeride, is common skating. You can go down the slides, then climb it, jump from a small springboard.
Frycarre or FreeCarve, - descent with grief for speed. The ability to make turns should be appreciated here.
First decide on the style of skiing, and now see which boards for everyone are suitable. They are soft or rigid. We will deal with how to choose snowboards beginners.
Hard there are 2 species.
Rather at Frycava - This means that it is necessary to do not in the tracks, but right on the mountain slopes. Last well-groomed, of course.
Special sports boards. Used with slalom.
How to pick up? Soft snowboards acquire those who want to ride Freeride or Freestyle. Another question, how to choose a snowboard glasses?
Buy those you like and which for your type of skiing recommends a consultant seller. It will be carefully picking.
Read articles on the Internet, soon you will figure out in the subtleties and understand how to choose clothes for a snowboard? And we will tell the nuances.
Let's look at how to choose a snowboard for growth. For the board under any riding style there is its own table. Look in her growth and learn what length you need the board. But you can buy the board using the universal acquisition scheme.
Choose a snowboard for growth and weight is not a problem. From its growth, you need to subtract the weight, and it will be the length of the suitable board. For example, with a height of 180 cm and weigh 70 kg, the boards should be 100 cm (180 - 80 \u003d 100 cm). Snowboard universal and sometimes from 105 to 110 cm. And what if you are thicker or thin or how to choose a child? Consider options.
You are thin, and the coefficient came out more than 110, then it is necessary to deduct from the found length of 5 cm.
You are a dense physique, and the coefficient came out from 95 to 100, then add 5 cm to the found length.
If you want to ride just from the mountain, then it is necessary to take 25 cm from growth, and there will be a board suitable in size.
When freestyle from the length, which came out initially, you need to subtract 5 cm. When freeride, on the contrary, add 5 cm.
How to choose a rosy for a snowboard? For example, with a height of 180 cm and weighing 80 kg, you want to ride in virgin, then the formula will be as follows: 180 - 25 \u003d 155 cm. Your weight is higher than the norm? So add 5 cm and it turns out such a pattern: 155 + 5 \u003d 160 cm.
When riding a virgin need to add an additional 5 cm. 160 + 5 \u003d 165 cm - this length is needed by a snowboard.
Now you understand that it is important to take into account when choosing a snowboard for growth? Experienced athletes can add 4 or 5 cm to their snowboard. Children's snowboard will be less than an adult.
How to choose a sneaking mask? Take with you experienced in Catania Comrade. He will tell, on masks of what design and what brands it is better to pay attention. The seller similarly recommends the best or average for your money.
How to choose protection for a snowboard, its sliding part of the part? Skolzayak, or the surface, is considered the best of graphite. But, unfortunately, it is soft and quickly erased, you will need a replacement. Only on expensive boards for experienced athletes and for professionals, the coverage is such a graphite.
The surface covered with polyethylene with graphite slides significantly worse. She will serve you longer, and such a board will cost cheaper.
Polyethylene surfaces can be sintered or extruded.
The last species selected Skolzyak is suitable more for beginners. They scratched faster, but also to restore them easier. For the beginner it is important to take these moments. And choose pants you need comfortable to soar on a sliding on a snowy slope.
The surface of the boards is called extruded when it is not processed, so slips noticeably better than sintered. But in polyethylene sintered surfaces, the structure is porous, wax falls at these pores, but such boards with deep scratches are harder to restore.
What to choose a snowboard for a child? Need not too expensive and comfortable. Let them learn to ride well, then buy more prestigious.
How to choose a snowboard shoes? Prefer such in which the foot will be toughly fixed. It will protect you when drops from injuries.
How to choose a helmet for a snowboard? It is important to purchase reliable. After all, you are a novice and fall a lot. The size of the helmet must be suitable.
You can buy a helmet, like a friend about your set and growth. Read the reviews on the Internet and buy the one about which many positive feedback.
With sports riding or fricarwe use hard boards. Choosing, remember that in sports you can do slalom or giant slalom. These boards are longer and can turn with a large radius. If you compare them with Frycarian boards, then they are more rigid.
Do you think how to choose shoes for a snowboard? If you buy a hard snowboard, then the mount should be rigid, soft with the same shoes can not be bought. How to choose a fitting for a snowboard? Skating style itself assumes that the fastening will be rigid. Now you know how to choose snowboard boots? Under the rigid fasteners are needed the same hard boots.
Those fastenings that are rigid to be fastened by your boots with metal frames. Capture goes for sock and heel, like in. This will help during skiing more sensitively to manage your snowboard.
How to choose snowboards suitable for the whole family? On soft boards you can drive both on specially organized slopes and in the chubby snow or in the style of Freride. Some are happy to jump on them from the springboard, in the style of freestyle ride Half Pype either in a snowpark.
Freeride boards are tangible hard freestyle. If you are going to be a discoverer or ride following friends on wild slopes, then you need a freeride board.
In addition, it is more hard and long, with a slightly back center of gravity. Thanks to this, she will not drown in a fluffy snow, and ride you with the breeze.
Would you like to ride slopes, and then jump from a springboard? Preferences Give the Universal All-Mountain Snowboard, which is used for freeride with freestyle.
Those who want to jump from the springboard as much as possible, experts recommend to purchase a snowboard for freestyle.
How to choose a snowboard jacket? She should be such that you are free to raise your hands up, on the sides, took back. If in your size it does not work so fluidly, take the size more. And the color can be taken by the one that souls. The mood raises a bright, sufficient warm jacket with durable fabric.
Now you know how to choose a suit for a snowboard and buy a comfortable.
In the store, select 2 Board Models. The first for hard fastening, and the second - for soft. Put the first one end to the floor at an angle of about 45 degrees and feed it with the second hand. Do the same procedure with the second.
Now you are on your own experience, make sure that the first one is much more serious. You need to take the board that is suitable for your purposes.
To know what attachment is purchased, you need to determine the size of a snowboard in width. Here are focusing on your parameters. If they are not very big, then too wide the board you will not suit you.
Boots must be fixed correctly. It will protect you from injuries when descent. Common physical training before skiing should be at your height.
Do you definitely imagine how best to choose the mount under your shoes? With men's boots Focus on this information:
if the sizes from 38 to 41, the board with a width of the waist s is suitable for you;
during sizes from 41 to 43, the size m is needed;
if you have a leg length more than 43 sizes, then you need a side having a width of L.
But I. female sizes:
starting with 35.5 and ending 40, fittings are suitable, denoted by m;
how to choose snowboards for a baby's suitable width, considering what size is its shoes? If the size is less than 35.5, then the board is required by width s;
with large sizes fits L.
Remember that while you are a rider-novice, you do not need to experiment much. The manufacturer for each snowboard recommends fastening suitable for it. Such and purchase. The purchased kit will be what you need.
It is not always clear how ideal is exactly for your board not intended for it. Do you break your leg, taking advantage of them?
Hands for a snowboard, get comfortable so that the legs in the knees are easily bent and did not quarrel on the seams.
You have chosen a snowboard of the desired rigidity to ride in a pleasant style for you. How to choose protection for foot or fastening? If it is riding with abrupt turns, then prefer reliable metal fasteners.
During jibing or freestyle, automatic mounts are not needed. They are traumatic.
Try to buy the best attachments from those you can afford. It is best to immediately install fasteners.
This service is additionally paid, and the consultant will help you right in the store. Use the service. After all, he will do everything right, and the set chosen to them is a guarantee of your secure slope.
Nowhere should there be chips with detachals on Kanta or on the bottom. If something is noticed, give up the purchase of this particular snowboard. After all, he can be defective, and seeing that you do not understand, the sales assistant can continue to praise a bad board.
When you roll, take any large tissue enough and wipe your board. It is very important that she does not remain wet for the night. Iron Canties can be powder.
How to choose a snowboard case? If you are a novice, choose the one that recommends the manufacturer to this model.
Now you know how to choose and buy a good board. All questions of choice is better to solve with a professional. For example, you can call with you a good friend who is fond of snowboarding.
One day the moment comes when Rider is solved on the responsible step - buying your own snowboard. On the one hand, the snowboard is not easy to choose, it is relatively expensive equipment that will not only contribute (or disturb) technical growth of a snowboarder, but also to a certain extent to provide (or not provide) its safety on the slope with the selected riding style. On the other hand, snowboard is, of course, the subject of pride and self-expression, even some experienced riders covers the desire to pick up the board at least a little in the color of the costume or choose symbolic graphics. Naturally, I want to buy the perfect version of all-in-one, to ride it for a long time and will not regret the choice for a minute. Therefore, usually every rider is responsible to the issue of buying a snowboard.
This article is an attempt to combine information, hoped from the Internet, advice of experienced riders, sellers of specialized stores and their own experience to answer questions "How to choose a snowboard?", "Snowboard how to pick up?", "Snowboard how to choose?", From what A snowboard is made and similar to them.
First, it is necessary to determine your level of skiing, because the tips for beginners really differ from the councils continuing and experienced. So, snowboarders are:
If you are new and got up on a snowboard only a couple of times, you need a soft and short (below the chin) board. It makes sense to choose one of the following options:
1. Take a chalkboard. This is an excellent solution for those who have not yet decided whether he will ride further at all. Also, for a beginner rider, it is useful to try different boards of various manufacturers, to identify differences, it will determine with the style of skiing and understand what he really needs. An additional advantage is comfort when transporting itself to the ski site: there is no need to lead a huge and uncomfortable sausage-case and worry about the safety of your equipment, because at any ski resort there is always a rental point. A foreign board is not so insulting to damage as a result of an unsuccessful accidental attendance, and rates for the repair of rented equipment are quite democratic.
Cons: rolling regularly, you post for an airen a round sum. In addition, at a certain point, the skiing level rises, and rolling boards, usually soft, killed and designed for newbies, begin to slow down progress and cause unnecessary drops.
2. Take a used board on Avito or friends. Usually used in the initial level board is not a problem. They get rid of those who, for various reasons, are not going to continue to ride, the initial level or, having fun at low cost, bought itself not what you need. When choosing a board, pay attention to softness and length. To determine the softness of a snowboard, put it with one end to the ground, the other take your left hand, tilt at about 45 degrees and press the right hand of the board. Bord should easily fuse and spring. I repeat, at the initial level, the board must be lower than the chin. If the board was chosen correctly, it is enough for the first season. And then define yourself - either roll on something more interesting, or come to the slope to light up and lay out a couple of new photos in Instagram.
3. Buy new snowboard. The boards of the entry level are the cheapest, always in stock, do not imply special requirements, but they are the most beautiful :). The task of such a board is to teach a snowboarder to move correctly, confidently hold onto the board and connt. The initial level snowboard is always mild and low, which makes it easier for the chain and allows the board to correct the technical inaccuracies of the snowboarder, to be obedient in management and promote progress in Catania.
Some manufacturers declare pretty hard snowboards. Be careful: it may be honeycomb "logs" or bords designed for already confidently standing on soft boards.
And yet: buying a snowboard "Navright" is crown by injury and loss of every hunt to continue skating. Nothing replaces the initial level snowboard, alas.
As for manufacturers, at the initial stage it does not matter. This is the lucky case when you can pick up from a large range of a snowboard to pick up a suit color, eye, hair or car. It is useful to remember that, like everywhere, for the brand you are twice.
Next question: Where to buy? If this is the first snowboard of the initial level - it does not matter. But if you immediately want to buy not ababa, it is better to avoid small IP (so loving underground China) to buy in proven major types of type Trajectories and Kant.(in Moscow and St. Petersburg) or Boardshop №1(in St. Petersburg), which are officially purchased from manufacturers.
If you have already been mastered on a board, confidently can be cooked, trying cool slopes, reach a speed of 25 km / h, trying to jump and spinning, and maybe even started to ride a virgin, and now we are confident that I have come to buy your own board, then I sympathize. How to choose a snowboard? Examine snowboard literacy. The structure of the board, Slang, parameters and characteristics will allow you to understand what how much you are talking about in stores, and also to distinguish when the sellers are brazenly lying, seeking to quickly fall unpopular equipment to inspired Borderer's first success.
For those who love to deal with themselves, can analyze and draw conclusions, and also if you want to know the meaning of this or that term, the most complete knowledge of the snowboards required by the rider is collected here. After familiarizing with him, you will know exactly what snowboard you want to buy for skating to be really in joy.
So what do you need to determine when choosing a snowboard?
First, the direction of skiing in which you want to develop further. It is from the riding style that your board will depend on.
Carving - high-speed riding on rigid prepared slopes with rigid and frequent charges.
Slalom, giant slalom (extreme carving) - high-speed descent on the hard-prepared coating wide arc using the entire width of the slope and touching the snow on the turns.
For these types of high-speed driving, special rigid boards have been created, which are noticeably different from the standard familiar eye of snowboards. They have an acute swept nose and a cropped flat tail, special fastenings in the form of a metal frame and rigid plastic shoes resembling skiing. These boards are highly specialized and are intended for riding on rigid well-groomed slopes, they can not ride a virulent or in the park. In addition to the shape, high-speed snowboards are characterized by high rigidity, large risks and a large rotation radius and higher price. Usually, they stand confidently ride riders or those who darked in the park.
If you like speed, but do not plan to choose a hard board, then a conventional snowboard is suitable, which has a high rigidity, a large radius of rotation and a large efficient length of Cant.
Frearyd - Officially: riding a virgin in the mountains with wide arcs at high speeds with jumps using the existing relief. But in general, Friride is called any incntulatory skating, because when a dozen freeriders drove along a virulent, it is no longer very virgin. Freeride is complete freedom: riding on glaciers, along the lifts, between trees, skating obstacles and other joys. However, highly zealous freeriders lies a lot of dangers in the form of a sidelines, avalanche or just jams in a deep fluff.
For freeride, the boards must be 3-7 cm above the usual, directed (Directional), with a wide waist, so as not to sink in virgin, medium stiffness to keep the arc, but have sufficient patency in narrow places. In order to in the deep snow, the nose did not break, freeride boards make with reverse deflection (Banana).
Freestyle - Officially: riding with various jumps and tricks in specially created parks.
If we compose, freestyle boards must be symmetrical (Twin Tip), maneuverable, with a slight turning radius, medium rigidity and high elasticity.
Several types of park skating are distinguished: HAF-PIP, or groove riding, Big Air - jumping from springboard and jibbing - riding on the railing. Snowboards for each species have their own features: Boards for high Pipe They have a complex shape of the side cut, consisting of parts of three circles of different sizes, flowing one to another, which makes the board very maneuverable. Snowboards for big Ayra The most expensive, because in jumping the board is experiencing heavy loads, so it is very important to have a high-quality technological board. Typically, such beards are lowered, with a large radius and complex shape of the side cut, consisting of arcs of two circles, allowing you to gain speed and at the same time perform various maneuvers. Boards for jibbing they have a rigid middle, soft nose and tail, wide waist, a small length. On beards for Dzhibbring, they are widely placed fasteners and kanta are blunting. Despite all the features, due to friction on solid surfaces, the snowboard is very quickly in disrepair, so you need to be ready that soon you will have to buy a new board.
Modern trends of the bills market reflect the desire of manufacturers to universalization. The assortment of freestyle boards is extremely wide, while under freestyle is understood not only the performance of various jumps and tricks, but also any "free" slope. But the classic freeride borders of the shape "Lastochka Tail" becomes becoming increasingly harder.
There are also so-called universal boards (All Mountains) . They are designed to deal with everyone gradually. Naturally, universality is a compromise. Such boards are slightly directed, have an average rigidity and a medium radius (about 8 meters). A reasonable solution for those who continue to be improved, but has not yet decided on a specific style.
After you chose the riding style, you need to pick up the board length. How to determine the Snowboard Rostovka? The meaning of the search for the right length is that the board under the rider has bent sufficiently, the weight was distributed evenly, and the snowboard would be able to rotate and manage. The main role is played by weight here, as the board feels weight, and the position of the center of gravity depends on the growth.
In this case, the resulting value can be adjusted depending on:
Now it's time to get acquainted with the insides of the snowboard to predict how one or another board will behave and why it stands so much.
Any board is several layers of various materials glued together and complemented by various options that facilitate the commissioning of a maneuver. If we consider the board from the bottom up, such composite elements of a snowboard can be distinguished as:
Base (she is Skolzyak) - The bottom surface of the board, directly in contact with the slope when driving. From her type dependes the speed of riding and the cost of snowboard repair: extruded (also called a pressed or plastic) - a homogeneous plastic surface, the most durable, easily serviced (simple paraffin application) and cheaply repaired (the repair is reduced to filling scratches with special material), but speed characteristics She does not have the most outstanding. The base is sintered (sintered) - is an inhomogeneous porous material obtained as a result of heating a special powder at a pressure. Pores between powder granules are filled with paraffin. This board will ride faster, but at the same time every 3-4 pokatushki will require a new paraffin layer. If the sintered slip is not to serve, the pores will be dirty, the surface will begin to smear. Repair of the sintered base itself is complicated and roads: spoiled piece cut out of the board and paste the patch. There is another third option - the graphite base, the fastest, durable and expensive. It is always black and found on top snowboards for professional riders.
RUBBER GASKET - Gasit vibration.
Torsion box - Determines the shape of the transverse cutting of the board, is made from the fiberglass (fiberglass) - glass-filled material with the strength and durability of the metal and the resistance of the polymer. This is the main part that specifies the board strength and elasticity. It is on her that all loads occur during Catania, it is thanks to her a border goes. Fiberglass allows the board to be not deformed, to be durable resistant to mechanical and temperature effects and at the same time have a small weight. It has a snowboard core and various additional inserts from various materials (metal, wood or composite). They may be longitudinal - to increase the torsion rigidity or tail of the tail part (freeride boards), as well as peeper, cruciform and others - to enhance certain board parts, for example, base bases.
CORE - It is inside the torsion box and determines the rigidity, maneuverability, stability, durability and board weight. May be wooden or composite. The wooden core is considered the best: it gives good characteristics of stability at high speeds and is not deformed during the operation of the snowboard. Minus wooden core - he is heavy. Often, such a core is found on freeride boards, and for a beard of freestyle, in which lightness and maneuverability is important, composite is more suitable.
Laminated surface(cap) - The upper part of the snowboard, usually with a pattern on which fasteners are located. May be glossy or matte. The lid of the snowboard is not repaired during damage, as it does not affect the operational characteristics of the board. Glossy surfaces are more susceptible to various scratches and other damage. Matte coatings are harder to damage, so such boards are often used in rowners.
By design, depending on the attachment of the upper surface, snowboards are divided into:
Kanta - Steel metal inserts on the sides of a snowboard, providing grip with snow on turns. For normal riding, Kanta must be sharp, so it should be pulled out periodically.
Mortgages - Nursing holes on the upper surface of the snowboard intended for fasteners. May be present in different numbers. The greater the pairs of mortgages on the board, the more accurate can adjust the position of the legs during skating.
If the mortgages are shifted to the tail, it is directional) bord for freeride, usually such boards have additionally reinforced tail.
If the mortgages are arranged symmetrically relative to the board center - this Twin Tip. where you can ride with any leading foot without additional adjustments and easier to perform different tricks. Twin Tip is considered a freestyle board.
There are boards, which, depending on the movement of fasteners by mortgage in different positions, can be Directional, and Twin Tip. Such borders are most versatile.
It should also be noted that there are snowboards with non-standard mortgage design. For example, Burton on its snowboarding makes mortgages in the form of triangles, which are suitable for only Burton fasteners (the rest can be fixed only with a special disk). These mortgages are part of the Freedom GOOVE system, when the mortgages can easily move along the board along a special guide, simply weakening the bolts. It is convenient if you need to quickly change the skating style and, as a result, the rack. Under the boards with Freedom Goove Burton releases special attachments with an EST mark that you will not be screwed to the usual mortgage.
It seemed interesting advice to monitor the long fastening bolts. They should not be excessively long and rest in the end of the mortgages, otherwise the mounts are kept fragile, and the mortgages deteriorate.
Now let's see what the characteristics are indicated in the descriptions of the boards, and how to choose what is really needed.
We now know, from which a snowboard is made, it is such a structure that gives a snowboard such characteristics.
Riding level. Usually types of rides look like this: beginners, continuing, advanced. It is quite easy to determine your level, it remains only to add that you don't need to lie yourself. If you rolled out the first season and found progress, you do not need to consider yourself an advanced rider. You will suit the board for continuing, it is on it that you can achieve new heights. Bordee for advanced most likely not only does not give you pleasure, but can also lead to serious injury.
Longitudinal rigidity. Conditionally boards are divided into soft, medium and hard. Almost every manufacturer has its own rigidity scale, which is extremely difficult to compare. To feel the longitudinal rigidity of the board, put it on the tail at an angle of 45 degrees to the floor and press the free hand in the middle. The easier the board bends, the one is softer. The rigidity of the board should grow gradually, together with speed and level of riding, because at small speeds, hard snowboards are unmanageable, just as soft snowboards unmanageable at high speeds. Thus, the right rigidity is a rider.
Torsion rigidity, That is, rigidity to twisting the boards on the helix. This parameter affects the stability of the snowboard behavior at speed. To determine it, you need to hold the tail of the board between the feet of the legs and try to turn it on or counterclockwise. The easier it is to do it, the softer the board, usually such boards are designed for beginners. Also, as in the case of the longitudinal rigidity, continuing, and even more advanced riders, which switched to decent speeds, need a border with a higher torsion rigidity. However, here you need to not overdo it and objectively assess your level of skiing, so as not to purchase an absolutely uncontrolled board.
Elasticity (click). This is the ability of a snowboard to return to the initial position after deformation. It is low and high. It is necessary for a successful landing after jumping, provided by inserts from carbon and kevlar. Snowboards for freestyle possess high elasticity, and for freeride, as a rule, low.
Radius of side cutting (or turn). There is a small / deep (about 7 m), medium (8-9 m) and large (more than 10 m). Little radius (it is a deep lateral cutout or a narrow waist, that is, a narrow middle of the board) means that on the slope such a board will make small arcs, which provides maneuverability and need for freestyle. A large radius (corresponds to a wide waist) allows the board to describe large arcs at high speeds, which is needed by freeridera. The average radius have universal All Mountains boards for calm riding at medium speeds.
Effective Canta length. This is the part of Kant, which comes into contact with the slope when you go on an arc. The larger the effective length of Kant, the more stable the board at the speed, which is necessary for carving and freeride.
Progr (Camber) - Snowboard contour, if it lies on a flat surface on the base. it happens traditional (The board touches the surface at two points in the attachment area, the waist is raised over the plane, is considered universal). Back (Reverse, Banana) - the nose and the tail of the board are raised, the board touches the surface with one accurate in the middle. It makes it easier to pop up in deep snow, needed for freeride. Flat Prohibition (Flat) - that is, the absence of a deflection simplifies the execution of freestyle elements. Mixed prohibition (MEDLEY) - a deflection of a complex form, combining different types of deflection in itself (or all). Usually are the experiments of manufacturers.
God forbid to buy a board in a sportsmaster, a decaton or in the stalls at the hipshnikov, who are staring to slip down the trash.
If you have read all this, then your desire to buy a cool bord is very large. Therefore, we recommend buying in large specialized stores with a good reputation. We do it in our beloved Trajectories we have a map there, so everyone will get 5% of the discounts - write to the post office [Email Protected]website, let's tell me))) Next rating a good store - Cant (There is also a 5% discount). As a rule, after trajectory bypass and Kant, the desired thing is. In St. Petersburg still have Boardshop №1 . Oddly enough, but in the same trajectory or in Kant or Bordshop, the projectile is cheaper thanks to all these discounts and bonuses.
But the main thing is to guarantee quality. As a rule, a good board serves a long time, and for a long time to roll on some Decatonovsky wedze will not be at all in the buzz.
Now you accurately buy the right snowboard and you will be able to break off on the slope!
So, you are already riding no one and not two seasons, you know everything about a snowboard and can really call yourself an advanced rider. You certainly know what style you ride, what kind of deflection is better and still want to buy a bunch that will give you new sensations on the slope.
Experienced riders carefully look at the snowboarding companies , Gnu.(they are, in essence) and Never Summer.
, like any major manufacturer, has a number of boards of various purposes, but their value is much higher. The fact is that Lib Tech has a number of interesting know-how, allowing their boards to show various qualities that makes riding even more interesting. Constantly improved materials of internal inserts, experiments with deflection and wavy Kant Magne Traction - this is only a small part of their inventions. For nature lovers: Production of LIB Tech Megaecological, fully protecting not only the world around, but also employees, and, that is important, Raders themselves. Boards do not contain harmful dyes, varnishes and even oil, and according to technological and characteristics, they are new and interesting.
Company ideology Never Summer Differs from LIB. Their boards are simpler and straightforward in behavior, but reliable and high-quality. Never Summer earned its reputation as reliable snowboards at the early stage of the development of snowboarding, in the distant 1983, and still focus on the quality of production, the best materials and a piece manual assembly.
However, it is necessary to keep in mind that the boards of an advanced level behave differently. They told the story as a guy riding a snowboard for many years came to acquire something like. And bought Lib Tech Skate Banana. Two weeks he came with his hand tied and without the front teeth and washed "Thank you for warned! And it would be worse." What happened to him, the story is silent, but morality is simple: excessive self-confidence, especially on the slope, does not lead to good. New board, and even more so, with a trimmed design, requires running.
Now go to the most important part of the snowboarding gear -
