Evgeny Sedov
When the arms grow out of the right place, live more fun :)
Content
Plastic window designs of different firms have similar adjustments. When they are installed, the average clips density are set. Over time, under the influence of wear or other factors, the sash can prick and start clinging the frame or an impos. When the temperature drops, the cold air from the street can start penetrating into the room. In all these cases, it is necessary to adjust the windows that can be conducted independently, if you know how to adjust the plastic windows for the winter switching the clamping settings from summer to the winter option.
Plastic window systems have become the most popular product that is installed during construction or repair as a simple apartment and a chic high-rise mansion. With all the variety of window fittings used in their creation, similar mechanisms are used in all systems. Preparation plastic windows By winter begins with the first cooling. The main tools that may be needed to adjust windows are:
In order to prepare eurosny to winter period, seasonal adjustment of the clamp of plastic windows is necessary, in which the following steps should be carried out:
Climbing to the frame is based on the engagement by rounded elements of the clamping slave, when turning the knob down. These rounded elements made in the form of an oval are called pinges, and made in the form of a circular element with a shifted axis of rotation - eccentric. The rotation of the axle is produced by pliers. Their vertical installation creates a minimum clamp, which means the summer pressed mode, horizontally - the maximum strong clamp. Rotating an eccentric by adjusting hexagon, you can adjust the clamp from weak to stronger and back.
Determine the need to replace the rubber sealer can be inspected and verified. You can change it with parts - at the same time you save money. Going for buying a seal, you should take a sample with you and buy a longer piece. It is better to cut up more unnecessary with a sticker than to leave the gap. Buy a high-quality rubber seal. It will be necessary to buy special glue for him. Before inserting the seal in the groove, apply glue throughout the area of \u200b\u200bcontact with the seal, glue it, close eurowindow for the period of drying the glue.
Adjusting windows and fit is made in the case of large gaps or when it is clinging behind the frame. Adjust the opening sash vertically and horizontally needed in cases:
Wind adjustment can be made independently if available required tool. The only details that can break and require the replacement are handle and sealing tires. Adjusting the window clips is transferred to the winter mode. At the same time, the handle turns with the effort, the sash is strongly pressed against the frame, heavily squeezes the seal. In the spring it will be necessary to loosen the clamp, since the opening on the ventilation occurs often, which can lead to a strong wear of the closing mechanism and seal.
To transfer to the winter mode, you must do the following steps:
Adjusting the upper loop is performed using a M-shaped hexagon. On the top loop there is one adjustment of the upper plank horizontally. The displacement control process is performed when open window The short side of the hexagon in the adjusting opening, which is located in the end of the sash. The range of offset of the upper part is in the range from -2 to +3 mm. The key rotates the screw to part of the turnover and check the ease of closing.
Lower loop adjustment is made by the same tool. The difference is that on the bottom loop, in addition to the displacement of the lower plank horizontally, there is a screw offset of the entire sash vertically. The horizontal displacement is made by the method similar to the upper loop. The vertical displacement is made with a semi-open window, for which it is necessary to insert the long side of the hexagon vertically from top to bottom into the hole of the canopy when the decorative casing is removed. Such a change is possible in the range from -2 to +2 mm.
Strong displacement of the supporting construction elements as a result of a shrinkage of a new building can cause strong departure of the frame from the frame, to reinstall the plastic window. If the opening has twisted hard, you will have to align it or order a new eurowownau. Internal adjustments of opening and clamping mechanisms can be corrected horizontally or vertically in the range of 2-3 mm. To do this, you will need a standard set of tools:
To align the flap horizontally or vertical, the plastic window is required in the canopy. Alignment in the horizontal plane is performed by end adjustments on the upper and lower canopy with a fully opened window. The hex key is inserted by a short side into the hole. When the key is rotated clockwise, the sash attracts to the canopy, against the clock - to the impost. The maximum adjustment range is from -2 to +2 mm.
You can adjust the displacement in the vertical position on the lower awn in cases where the sash hits the frame or to change the values \u200b\u200bof the gaps. This will require a hex key. You must open the cap on the canopy, insert the hex key with a long end down into the upper hole. Rotating a bolt clockwise, the sash can be lifted, counterclockwise - omit. The maximum adjustment range in height is from -2 to +2 mm.
Fitted on gaps from above, bottom and sides of the sash may not be closed in two cases. The first is associated with a breakdown of the handle, the second - with the incorrect work of one of the pairs of pin-clamp. To check, you must open the window and, pressing the double opening lock by your left hand, turn the knob down. If she turned to the extreme position, then the problem of closing in one of the pairs of pin-clamp. Determine which pair does not work, you can take turns, unscrewing the clamping slats with a cross screwdriver.
? 
Device, diagrams and photos of the elements of accessories, adjusting bolts, movable parts of euro-mounted, methods for eliminating faults and prices can be found on the Internet on sites on this subject. Adjusting the handle is the correct installation in accordance with the list. The opening handle has four positions:
If you broke the handle, you need:
If the handle on the window or the balcony is breaking, it is necessary:
All elements of the canopy and closing of the sash are outside the design. The main actions in contamination of the elements of this mechanism are its cleaning and lubrication. If the window did not open for a long time, remove the dried dirt or rust with the help of the VD-40 universal lubricant cylinder. After cleaning, the wash should be smeared to the accessories, make it setting it.
Eccentrics are round elements that are engaged with clamping straps. The axis of their mounting is shifted relative to the center of the circle, so when rotating changes the distance from the axis to the point of touch to the presser bar. With an increase in this distance, the clamp of the sash to the frame is enhanced. The rotation of the eccentrics is performed using the hex key or screwdriver. The quantity change value varies from 2 to 5 mm, depending on the design of the eccentric. Customize the press strength is necessary twice a year when switching from summer to winter mode and back.
Among the possible breakdowns of the locking mechanism may occur the knob. Applying great efforts to the opening handle at the same time it is not worthwhile - accessories should be preserved to extend the service life. The jamming is possible in three situations - the window is open to ventilating, open or closed. If the knob is clinically in the first two cases, there is a skew when opening or triggering a special block. If the sash hangs on the same bottom loop, you need to do the following operations:
The rotation block triggering can occur as a result of a sharp turn of the handle to a large angle when opening. Removing the lock is made by pressing the unlocking button or rotate the corresponding lever. Its location can be found on the website of the developer of your fittings. If there are difficulties with the opening, try to press the frame very much and turn the handle.
Tight turning or jamming of the handle with a closed window is possible when shrinking and strong (more than 2-3 mm) sorting window or door opening. This is an extremely rare and complex case that can lead to a mock or breakage of the mechanism. Without specialists construction company Or installments to solve this problem with simple adjustments will not be possible. It is possible to join due to the lack of lubrication of the shutter mechanism. To prevent this and increase life maintenance It is advisable to produce one or twice a year.
Repair and adjustment of plastic windows is made by many firms of Moscow, St. Petersburg, other cities of Russia, who know how to adjust the PVC windows can put new spare parts. Prices for such services are different in the regions of the country, they depend on the brand of the manufacturer of fittings. The departure of the master for technical inspection and drawing up the estimate of Moscow will be from 500 to 1000 rubles. The minimum order value of Moscow is from 2000 to 3000 rubles. The cost of basic works is indicated in the table:
|
Name |
unit of measurement |
Cost, rubles |
|---|---|---|
|
Adjusting accessories (without removal) |
||
|
Door setting (without removal) |
||
|
Setup, repair, partial bulkhead mechanism (without replacement of accessories) |
||
|
Adjustment, repair, partial bulkhead door accessories (without replacement) |
||
|
Reinstall the glass package when adjusting |
||
|
Reinstalling the door glass package (the price of the glass package is not included) |
||
|
Cleaning, lubrication accessories |
||
|
Replacing the seal (the price of the sealer is not included) |
||
|
Replacing the full set of swivel fittings |
||
|
White handle / color Found in the text error? Highlight it, press Ctrl + Enter and we will fix everything! |
Now it is easy to adjust the manufactured plastic windows. Summer and winter regime, the adjustment of which is carried out in the fall and in the spring in the preceding the sharp temperature differences, makes it possible to change the clamping force, which allows to vary the degree of ventilation.
The procedure itself represents certain manipulations that may be required immediately after the installation of the new glass package. This is a kind of preventive repair, allowing to evaluate the readiness of window structures to one or another season.
After you bought plastic windows (summer and winter mode), adjustment, the setting of them is quite simple. For this, several simple steps should be performed, namely:
You can turn the eccentric using a suitable hex key or a flat screwdriver. It is often practiced a change in the position of the eccentric just with fingers, by pulling out the adjustment mechanism and its turn.
The difference between the maximum and minimal clamp of the sash is 0.2 cm, which is quite enough to increase the inflow of fresh air.
It should be borne in mind that plastic windows, summer and winter mode in which are provided, corrected by the strength of the sash. In the cold season, this process allows you to strengthen this indicator, and in the summer, clamps are weaker to enhance ventilation.
Quite often, the eccentric slot is placed in parallel to the edge of the window sash. In this position, it happens if the design comes directly from the manufacturer (a universal location that differs from the position "Winter" or "Summer" is only 1 millimeter).
IN winter The orientation of the trough is aimed at creating additional pressure on the rubber seal. Specialists advise on new windows this item not to establish, bypassed a neutral position or summer option. Sealing gum is an important element in the design of plastic windows, for this it is treated with silicone, which allows you to extend the service life.
The main advantages of plastic window structures include a high tightness indicator, which does not create drafts and allows you to keep a normal microclimate in an apartment or house. After a long operation, the characteristics of tightness may vary, which is associated with a set of reasons. For the design, which is already in use, is characterized by breakdowns, which reduce this function. Such a violation often leads to the creation of an unstable microclimate in the room.
After plastic windows (summer and winter mode), the adjustment of which should be carried out in a timely manner, adjusted accordingly, the following effect is achieved:
If everything is done correctly, plastic windows (summer and winter mode), the adjustment and correctness of the setting of which does not require much effort, will serve for a long time, reliably and functionally in accordance with the season.
Different mechanisms of plastic windows may have differences in the design. This is due to the different number of eccentrics and their configuration. Some products have cylinders located around the perimeter of the sash, other samples are equipped with a pin with the upper or lower location of the loops.
In order to correctly adjust the plastic windows (summer and winter modes), the adjustment changes must be carried out in the appropriate period. You can control the position of the trough yourself. To do this, perform the following manipulations:
As a result, the desired mechanism will be visible in the field of fixing scissor window parts.
Plastic windows (summer and winter mode), the adjustment of which consists of moving the eccentric to the required position, are adjusted by simply turning the hex key counterclockwise.
After the perfect actions of the TsAPF moves to the desired position and will be established at the desired level. Once all the details become in place, the preparation of the window to the winter period can be considered completed.
In addition, check the condition of the fittings. All weakened and faulty mounts need to be replaced, repair or secured.
In the modern world, people and thinking forgot that any problems with windows are possible. Most of The population replaced their old windows on plastic. There are many principles for choosing the right windows and no less important aspects of their use. Let us dwell on the most common.
Winter mode of plastic windows
Buying window fittings, we absolutely do not think about the intricacies of the operation of these structures and the features of functioning at different times of the year. Often, installing windows in the summer, buyers face the problem of blowing plastic windows into the cold, absolutely unaware that these designs have summer and winter use mode.
Winter mode of plastic windows is designed to make the sash close to the window frame. Plastic windows mode affects the safety of heat indoors in the cold.
Often, the plastic window ventilation from the winter mode can be confused with the adjustment of the accessories for the winter period, but it is completely two different windows.
When it comes to the density of the fold of the sash, this is the mode that protects your apartment from excessive purging plastic windows. When you need to ventilate the room, then the flow valves are used. Windows for winter mode can translate a special master. With a certain skill, this can be done independently.
The summer mode of plastic windows is characterized by the fact that the sash is not so tightly adjacent. Thus, it appears the possibility of constant free air supply to the apartment due to micro-taking.
There is a classic position - the mode of the average adjuncing of the sash to the frame when the eccentrics or the axes are located in the middle position. A window with a double-glazed window in this mode is equally well performing its functions at all times of the year and provides adequate adjoining of the seal.
Changing window modes, you can not only avoid drafts in the apartment, but also to extend the life of the structure. In winter, the material becomes more compressed, and in the hot time it returns to its original position or expands. Adjusting the windows accessories to the desired mode reduces the wear threshold of the seal and fasteners.
One of the leaders in the production of plastic windows in which winter and summer mode is provided is Rehau. The company was founded more than 70 years ago.
During its existence, the company has grown to a well-known brand with 170 branches worldwide. Rehau is the main partner of Porsche, Volkswagen, BMW and Audi. The company manufactures parts and systems from polymers for these concern.
Rehau work is aimed at developing and implementing not only plastic windows, but also body systems, ventilation equipment, seals for cars, systems of modular batteries for electrocarbar batteries.
The installation of plastic windows Rehau will provide the room to everyone necessary for the unimpeded penetration of daylight, as well as protect against urban noise and cold.
But how to translate plastic windows in winter mode yourself? Consider this question in more detail.
We translate the windows in the winter mode correctly
Translate windows to the winter mode at the autumn time is the ability to save on heating. May not translate windows to another mode while maintaining good qualities Sealer. When spring comes, move the windows in the summer mode. Due to the correct adjustment and reduction of load thrust on the window seal, will serve longer.
Switch the accessories of the window can be used to be designed for this eccentric (pin), which are located on the side on the sash. If the eccentrics have recesses for a key with a hexagon tip, asterisks, screwdrivers, or eccentric in the form of an oval, then such a design is capable of transition to any kind of window mode.
Eccentrics in their structure can be round or oval with openheads for hexagons. To switch the window to the cold mode, all eccentrics should be adjusted.
Plastic windows in the winter mode switch is easy. It is important to remember that incorrect adjustment is able to negatively affect the windows. A schematic process is as follows.
1. First, to switch the mode of plastic windows, it is necessary to take the hexagon to pull the window sash.
2. When you pick up the window, the round of the door will be visible from the door. The pattern located on the pin in most cases is directed upward. This suggests that the intermediate window mode between the winter and summer is installed.
3. The hexagon must be inserted into the centrally located hole of the pin and turn it at right angles in the seal direction. Now the adjustment of notches on the pin should look at the seal.
4. It should be noted that the main mass of the windows have more than one pin located on the window sash area. In order to avoid purge, all the trumps need to be switched to winter mode.
5. To evaluate the work, insert a piece of paper between the frame and the window sash. Next, look at how easy it is or difficult for you to remove the paper from the window. Thus, you can understand the quality of the clamp and accurately translate the window in the winter mode.
Important! When operating accessories, noticing purging with a closed sash, adjustment should be adjusted - the translation of the design in the winter mode. But this mode can significantly settle the rubber seal of plastic windows. Therefore, it is not worth tightening the eccentrics too much, since because of such an adjustment of the pin and the window frame will fail much faster.
At the occurrence of summer, turn the windows in the summer mode. The use of an inappropriate mode will soon ruin and build a seal.
Plastic windows from the winter mode can be translated by inserting the hexagon into an eccentric and srolling it clockwise. Remember, the operating time of the window depends only on your correct adjustment and prudent use.
Plastic windows are saved from street noise, provide a comfortable air temperature of an apartment, a private house. However, after installation, they require. Setting the locking mechanisms is needed every off-season - only then the windows will perform the task supplied before them. Today's article will tell how to translate the windows in the winter mode, for which it is necessary when such actions are performed. Along the way it is worth understanding the features of the locking mechanisms, the device, some nuances of functioning. We will help us with photo and video instructions, explaining the algorithm in detail the actions performed.
Immediately make a reservation that with the lack of knowledge and experience, our edition recommends contacting the professionals of his case. Specialists specialized firms Consult all possible issues and will offer the most profitable solutions to problems. Well, for those who still want to independently do this issue - a small reference.
Modern plastic windows are adjustable by the strength of the clamps in three modes:
Enough 2-3 years not to switch the "winter-summer" mode on plastic windows to after, even when right adjustments Beginning to think from under the windowsill or balcony doors. Consider problems arising from incorrect settings.
The first is a disturbance of the microclimate of the room. Excessive contributes to the occurrence of condensate on frames, double-glazed windows and walls, which leads to the appearance of mold. "Summer" settings in the winter lead to heat loss, there is a need. The result is increased gas accounts or.
Important! The use of the winter position of plastic windows in the warm season will lead to rapid wear of seals. The result is the uselessness of any subsequent adjustments. Exit - replacement of sealing gum standing non-sash.
Disadvantages of window adjustment may occur only with incorrect actions. homemade Masters. If everything is done correctly, the switching of the modes will only benefit. We will figure it out in what cases it is justified.
Timely switching will extend the service life of the windows, even if for some time these actions were not produced. Drafts in winter or dust hit in summer due to the rendering of accessories for winter mode. Let be long, but for a year or two will be delayed. Schedule loops is eliminated in the same way. Replacing accessories is an extreme measure.
Good to know! Incorrectly displayed modes can cause the window to join or the door separately in the ventilation position or together with the opening.
Not all models of plastic windows have the ability to change modes. To understand whether it is present on your glass packages, you need to look at the shut-off valves. Eccentric, located in the middle, maybe oval form or in the center it will have a hole under the asterisk or hexagon. This indicates the presence of a winter regime on plastic windows. The photos presented below will help the reader to deal with this question.
The algorithm of actions when adjusting windows with different pinches is identical, but their position may differ. Let's try to deal in detail with the types of eccentrics.
The oval pin after installation is more often located diagonally - this is a standard position, mean between winter and summer. Horizontal position speaks of winter, and vertical - about summer mode.
If the eccentric of the shut-off reinforcement is round (under the hexagon), then the position is the following. Put forward in the direction of the street - winter, located in the center - the standard, drowning towards the apartment -Leto.
The third option is a rounded hexagon pin, which does not move when turning. In this case, it is a risk that indicates the correct position. To make it easier to understand, we offer to view the pictures, how to translate the windows in the winter mode.
Before, you should produce preparatory work. The first thing to be done is to remove the lubricant from the knife shut-off knots so that along with it when adjusting does not fall inside the dirt and dust. After all the works produced, the mechanism is again lubricated.
Very important! Rubber frame seal before cold should be processed. You can do this with a lubricant (based on silicone or glycerin), but it is better to use a silicone spray that is sold in all economic and automotive stores.
Specialists recommend translating shut-off mechanisms from summer for the winter only in extreme cases when drafts are becoming sensitive. However, this is suitable only for the warm climatic zones of Russia. The optimal will be switching at the beginning of the heating season.
Specifying the need for adjustment can and drunk a glass or a small appearance on it from the inside of ice.
Helpful information! Before switching the windows to the winter mode, you should carefully examine the rubber seal. Perhaps adjustment of the fittings of the sash is correct, and the seal cracked or broke. In this case, it is necessary to replace it. For one winter you can buy cheap seals, but they do not pass more than the season.
Recommending how to translate the windows to the winter mode with a hexagon, a screwdriver or pliers, you can move to the rest. After all, with time, the frame may be a story, and one side will lay down the tight other, which is unacceptable. This creates a load on the window fittings and contributes to the appearance of drafts.
Adjusting the sash vertically and horizontal is carried out from the bottom loop. Remove the protective pad out of plastic and find a screw with a hole under the hexagon located on top. When turning the screw clockwise, the frame will start raising. Turning counterclockwise, lowered the glass pack. In order to push the frame from the frame or, on the contrary, set closer, we use the screw located on the side at the bottom of the loop.
Important! If all the adjustments are made correctly, and the problems of drafts did not disappear, this indicates the wear of seals, the factory marriage of the frame or improper installation of the flaps. We check the sealing gum, and if they are normal, we appeal to the claim to the installer. That is why it is important to perform the settings in the first year of operation - the possibility of warranty repair remains, and sometimes replacements.
Article
When buying plastic windows, always pay attention to the design of the winter mode. Window installations from the company Reheau have long been using such functions in the manufacture.
It is worth noting that not all windows can be translated into summer-autumn modes. This is typical for more expensive models that possess not only opening and closing functions. The Reheau windows are just belonging to this category of product data.
In winter, the windows must perform the function of preserving the heat in the room. This is very important, because not all models have resistance to a strong decrease in temperature. In the summer it is important that dust and dirt fall into the room and dirt from the street, and there was also access to fresh air.
To find out whether your window construction Such functions, you need to explore it. On the side of the flap should be a hole, it is on the pin.
Windows in winter mode must be translated in such cases:
The windows from the manufacturer of the rheau is easy enough to translate into the winter mode, you just need to follow the instructions. First you need to completely clear the window from pollution, it applies to fittings. Cleaning can be done with a special tassel.
If the lubricant on the details of the structures is outdated - replace it. This will significantly speed up the process and will help as accurately adjust the mode. Then, deal with the adjustment of the necessary sash. Find all the necessary trumps on it (their quantity depends on the size of the window).
In order that the sealer pressed correctly, it is necessary to translate all the levers. It is worth considering all the troughs, as modes can be marked. For turns, use a screwdriver and pliers, or a hexagon. Turn each of the levers as much as possible.
To check the correct operation of operations, close the window. If the closing has become dense, then the function is configured. Try to insert between the sash and the frame of the paper sheet. If then the sheet managed to pull out without much effort, something is incorrect.
Best of all, the presence of modes to check immediately before purchasing windows. Then you will advise on all questions and will give a couple of tips for setting up functions.
Wind adjustment. Translation of fittings in winter mode:
