House, design, repair, decor. Yard and garden. Do it yourself

House, design, repair, decor. Yard and garden. Do it yourself

» Fire cabinets Open and closed SPK. Cabinets Firefighters Main types of fire cabinets NGO pulse

Fire cabinets Open and closed SPK. Cabinets Firefighters Main types of fire cabinets NGO pulse

General Family fire safety One or another object is determined by the possibility of localizing and extinguishing the fire in the embryo, at the very beginning of fire. An indispensable means of primary fire extinguishing - fire extinguishers and fire kits - built into the plumbing special cranes and sleeves with nozzles. Usually, when sunbathing, the fire applies to low speed, unless of course, there are no flammable objects or liquids near the focus.

At this stage of fire development, it is easy to extinguish with a stream of water, a powder or foam fire extinguisher, provided that he was at hand at the right moment. Therefore, the storage of fire extinguishers and the availability of access to them is important. For this purpose, cabinets Firefighters NGO pulse are created. The Production Association of NGO Pulse is one of the most famous and popular manufacturer in Russia.

Types and modifications of fire cabinets:

For each Fire Protection Object Defined regulationsdefining the amount and type of fire extinguishing means. In some rooms for complete safety, it is enough to have a 2-3 fire extinguisher, and there will be few in others and 20. It depends on the category of premises, works produced in it, such as materials or equipment, wall material and electrical wiring material.
Therefore, the cabinets produce various sizes, tanks, installation type. Among them, the main things can be considered:
  • wall
  • pottal
  • embedded.
By appointment, they are classified:
  • for manual fire extinguishers,
  • for fire crane-sets,
  • combined.
Like most modifications, the metal fire cabinet NGO pulse is painted by the weatherproof anti-corrosion powder paint. Such a coating for more than 10 years protects the metal of the cabinet from rust and other damage, does not penetrate and does not breed at low or high temperatures conventional range.

The door of the cabinet can be equipped with a glass window, through which you can see its contents, or be deaf, opaque. But in the same time there is a special niche for storing a spare key. This niche is closed with glass, which in a fire must be broken if the main key is in an unknown place.
To protect against vandals or intruders, the door is closed on the castle.

The main types of fire cabinets NGO Pulse:

Scientific and Production Association Pulse produces different kinds Firepart products of active and passive type. Fire cabinets are one of its important types.

A built-in fire cabinet SPK 310V NGO pulse is used to place fire cranes and sleeveless cassettes. The cassette can be folded at 90˚ to facilitate the unwinding of the sleeve. In front of the door there are two holes for fire valves of an angular or direct-flow type. The hinged cabinet is made under the 310N SPK indexing.


Both options can be released in closed or open versions with the right or left door. Painted in white or red colors.
Cabinet Fire SPK 315 NGO Pulse 1 is designed to store the fire extinguisher weighing up to 12kg and the crane kit. Inside it is divided into two separate compartments, which are closed with separate doors equipped with their own locks. Produced in open and closed versions.


Firefighters Metal Cabinets NGO Pulse SPK 320H also have two compartments - for fire sleeves and two fire extinguishers. Sections are located not next to each other, but vertically. Fire extinguishers of any modification are stored in the lower compartment. Every weight can reach 10 kg.
Doors in most models are glazed. In some cases, the cabinet Fire SPK 320 NGOs Pulse for the fire sleeves is used as a storage of one crane kit. It does not equip the fire extinguisher. Sizes I. appearance Its the same as the usual one. The cabinet of the fire crane is installed near the built-in or exterior plumbing systems and is equipped with a sleeve on the cassette and valves. The sleeve is equipped with a fire tip or sprayer.

A fire wardrobe for keys is used to store key set from fire cabinets and storerooms with tools. It closes on the lock - latch, open which can be a special key. In an extreme situation, the glass door is divided into access to the keys stored there.

Fire cabinets are designed to connect a fire crane on production facilities and in public buildings. Produced with a compartment for fire extinguisher or without it. Equipped with a turret (basket) for and a hole for the failure of a fire crane. Made of thin-grained steel. The built-in cabinets are distinguished (c) and mounted (H), with a window (o) and without the window closed (s). Color white or red. Doors of cabinets are equipped with special locks. Cabinets are designed to operate in rooms at a temperature of +5 to +45 degrees. and relative humidity up to 95%.

According to the rules, anyone that is not used continuously must be stored under appropriate conditions. "TPK Promaeerotekhnika" sells fire cabinets of European quality, which are intended for the storage of fire safety elements (fire hoses, fire extinguishers, etc.). We can find a wide selection of cabinets that are intended for installation in public buildings, as well as manufacturing enterprises. Our highly qualified employees will consult about the selection and conditions for placing fire cabinets on your facility.

Requirements for fire cabinets

The cabinet must be located in strict accordance with government norms and fire safety instructions. In residential I. multi-storey buildingsDepending on the area, on each floor it should be placed from one to several fire cabinets, sometimes their number reaches tens. At the production of cabinets are placed in the places allotted for this, combined with fire shields, on which the means of operational fire extinguishing and the fight against the fireplace (fire extinguishers, shovels, buckets, axes and bagor) are placed.

How to buy?

"TPK Promeerotherhnika" offers a wide selection of models of metal cabinets for fire equipment in red and white. Or get highly qualified consultation by telephone, as well as contacting the company's central office .. The company also offers a wide selection of ventilation, fire-fighting and sanitary equipment. Our specialists will develop project documentation Or will provide professional advice to their customers. We will promptly deliver all the equipment to the customer's object. Our company will be glad to see you among our customers!

Fire inventory designed to eliminate the focus of fire in the event of its discovery, should be at each enterprise, in the office, residential or commercial object. But for unhindered and prompt access to funds fire protection The regulations of their storage defined by legislative acts and SNiP must be met, the fire wardrobe SPK is installed in the buildings in the buildings.

Where to buy cabinet SPK

NGO "Pulse" is one of the largest enterprises of the capital and all of Russia specializing in the production of fire safety facilities, including on the manufacture of various models of SPK cabinets and their delivery to the regions. The company's products meet the standards defined by the standards for the SPK cabinets. The proposed solutions can be effectively used on production, indoors various destination. Cabinets are available in various modifications, including:

  • closed cabinets for fire crane,
  • open fire cabinets.
  • open and closed.

Fire cabinets for fire cranes from NGO "Pulse" are distinguished by a competitive price, as its own modern production allows the company to hold the cost of products at an affordable level.

Varieties of cabinets

The SPK is classified, based on the configuration, configuration and purpose. They are divided into constructions for:

  • cranes (a separate ruler go fire cabinets for 2 cranes),
  • fire extinguishers,
  • combined.

Cabinets for two fire cranes or combined can have two cells, each of which is placed separate means of fire extinguishing. Also, fireproof cabinets for hydrants and storage of fire extinguishers can be additionally completed with the alarm button. Mounted products by mounted, embedded or insertion.

Specifications

The cabinet for fire sleeves, hydrant or fire extinguishers is made in the form of a rectangular design of sheet metal, painted powder paint in red. The mounting of the cabinet is carried out due to the anchor bolts in the immediate vicinity of the fire valve. The weight of the structures varies depending on the configuration in the range of 20-40 kg.

Cabinets are equipped with a swollen door with a locking mechanism, the key from the cabinet should be stored in an affordable place.

Advantages of SPK

This fire equipment is very popular thanks to the convenience of storing fire protection. The advantages of structures include:

  • high strength
  • excellent performance,
  • resistance to external influences
  • wide the lineup,
  • foreign attractiveness and constructive simplicity.

At the request of the customer, the cabinet can be made with a deaf door or with glazing. In the second case, refractory glass is used, which allows you to see the contents of the cabinet even with its closed state.

If you do not know which cabinet for a fire crane to choose, consult our manager. A competent specialist will tell about the advantages of each model, will help choose the optimal size, configuration and configuration of the product for a specific object. Installing the high-quality SPK cabinet and competent connection of systems to a source of internal water supply will avoid fines of controlling organs, material losses and injuries of personnel in the event of a ignition.

Fire cabinets - Metal structures in which the primary means of fire extinguishing, the means of individual protection and rescue of people are placed. Fire cabinets are installed in residential, trading and warehouses, in offices, public buildings, in parking lots, etc. Depending on the configuration of technical means, cabinets are the following types:

SPK - serves to accommodate only a fire crane;

Shp - to place fire extinguishers;

Shpko. - to accommodate PCs and fire extinguishers;

SPMI - Cabinet multifunctional integrated. May consist of several compartments and contain a first-aid kit, hand tool, rope stairs, self-supporters, etc.

Also in the fire cabinet can be kept personal protective equipment (PPE), protective suits, primary means of fire extinguishing and other. Hinged cabinets (H) are made with the rear wall or without it; This type of PS is fixed on the walls. Built-in cabinets (B) are also mounted, they are installed in wall niches. Power cabinets (P) are placed on the floor, with the back wall they are adjacent to the wall. Fire cabinets can be manufactured in a collapsible option, convenient for transportation.

Cabinets firefighters are made of metal (thin-sheet rolled) with a thickness of 0.7-1.2 mm, in the doors are provided ventilation holes. Products are painted with polymer-powder anti-corrosion paint in red or white color according to the RAL catalog. The closed cabinet (h) has all-metal doors, open (o) with glazed doors. The design of the cabinet can provide a compartment for storing fire extinguishers or a cassette for placing a fire sleeve, as well as a button. fire alarm. Each technical means must be located in a separate compartment or on separate shelf, they should not lie down (stand) on each other. In the side wall of the cabinet there is one or more holes for the failure of the fire hose. General requirements for fire cabinets are installed in GOST R 51844-2009. The cabinet is sealed and / or locked on the key; The key must be in a glazed niche, which, as a rule, is located on the cabinet door. In case of fire, glass should be broken.

When placing fire wardrobes choose the most dangerous zone in the fireplace. On the industrial enterprises Near the cabinet must be installed boxes with sand. When placing a fire cabinet, you should guide the speed of access to its content in the event of an emergency. At least once a year, it is necessary to test the contents of the PN on the subject of completeness, integrity and efficiency.