House, design, repair, decor. Yard and garden. Do it yourself

close ×

Tandar is a jug-shaped furnace with high heat capacity and low fuel consumption (firewood), which makes it simply indispensable in the steppe. Pilaf, shuffer, kebab, lavash - all these dishes are impossible to imagine without the use of Tandara. There are several types of such furnaces, a number of them can even be done at home. In this article, we will look at two ways to manufacture a tandora from a 200-liter metal barrel.

Before proceeding with the manufacture of a tandora from a 200-liter barrel, a number of instruments and materials should be prepared.

Required tools and materials

To create the presented type of Tandara, the following materials will be required:

• 200-liter metal barrel;
• brick of refractory type;
• sand;
• clay;
• water;
• pallet (needed to collect fat);
• armature;
• board thickness from 25 to 30 mm;
• wooden cutlets.

The following will be required from the tools:

• bulgarian;
• scissors for cutting metal;
• master OK;
• putty knife;
• trowel;
• drill.

Manufacturing Tandara

Feeding the presented materials and tools can be moved directly to the manufacture of the furnace:

1. 1. Clean the barrel using high pressure washing.
   2. It is necessary to take a metal 200-liter barrel and cut out the end wall, where the bay neck was placed.
   3. At the bottom of the barrel, with the help of a grinder, the hatch cutters - it is necessary for supplying fresh air to the burning area.

1. 1. The walls of the barrels are plated by refractory brick. Masonka must be performed on cleanium, solid thick layer. It can be purchased in the finished form (for example, Weber Old ML SAVI) or create yourself. Proportions: chammed clay - 1 part, ordinary clay - 1 part, sand - 4 parts. Mixtures on cement based No approach, since they are less resistant to elevated temperatures. This can lead to the fact that during the use of the furnace of its walls crackle.

1. 1. With the help of a brick, the brick is given the necessary form. The masonry is performed until the top of the barrel. The masonry is carried out in a quarter of the brick, during its execution, make sure that it is accidentally laid down a hole for pondered.
   2. In order not to have problems with the closure of the lower pond, it is necessary to cut the edge of the edge with the brick under the corner. After that, it is necessary to attach a wooden handle to the brick, for this, the deepening is drilled in the center of the brick, and the handle is planting on the clay solution. You can use a cast-iron door pondered with steel damper, but it will be less sealed.

1. 1. The installation of the pallet for grease is carried out. The pallet is a small-sized bowler, which is attached to the metal crossbar and hang inside the tandora. For fasteners of the pallet inside the furnace, in brick masonry It will be necessary to make slots.

1. 1. Further, a wooden cover is made for the tandora. To create it will be required wooden boards Thickness of 30 millimeters. The lid is a two-layer, the diameter of the lower layer is approximately half the top.

After making the oven it is worth thinking about its installation. As the furnace is stationary, it is required to be installed on the foundation. It must be shallow, about 20 centimeters. In this case, the diameter of the recess in the ground should be slightly larger than the diameter of the furnace, approximately 15-20 centimeters. For the manufacture of the foundation, it is necessary to fall asleep on the bottom of the pit pillow from the sand, and to lay on top reinforcement grid. A formwork is created by a height of 10-15 centimeters, it is poured with concrete.

Second way

There is something more light way Manufacture of tandoor from a barrel:

1. Inside the barrel, clearly in the center, a piece is installed iron pipe Large diameter.
2. The space remaining between the walls and the pipe space, it is required to fill with a clay, slag or broken refractory brick.

The disadvantage of this method of manufacturing a tandoor is that the temperature inside the barrel is much lower than when using potanda from ceramics.

Observing all the technology of creating a tandoor from a 200-liter barrel, you can create an ideal oven for cooking Eastern and Asian cuisine as soon as possible.

I always want to decorate your garden or summer cottage, so that it was nice and the neighbors could be surprised! What do you think you can use barrels in the country?

Of course, the first thing that comes in response is:

- Collect rainwater. This is certainly very important !! Water dated to us, well, how not to use it is good. Well, the barrel of course you need to decorate so much so that you can admire it!

You can make a summer house for faithful guard.

The house for kids who love to play in her daughter - Mother. Such cozy house, with closures and curtains, and decorate it with a beautiful pattern.

To rest in the garden really make such a waterflower garden furniture. Design options for such furniture, you can come up with a lot, I suggest options that found on the Internet.

For collecting greenery with cottage plot For the formation of organic fertilizer.

Landing vegetables too a good option! Tomatoes, cucumbers, potatoes, strawberries, wonderful options for growing vegetables and berries in unnecessary metal barrels. And the barrels can also be painted !!

Flowerbed is a train, I think that many can see such an application of the barrel. Yes, and children are good entertainment!

Wonderful wardrobe for storing dishes and option to protect the access of rodents to edible supplies!

Barbecue outdoors.

Lamps, if barrels are not standard, but smaller. Mult holes drill on the invented drawing, apply paint, install electrical equipment and the whole cottage will glow!

Little pond for giving.

- Capacity for swimming!

Here you met with the proposed options and found out that you can make from the barrels in the country.

And on how to decorate the barrels used for watering, in the article.

Metal barrels often remain on the plot after graduation construction work and repair. For someone, it is just a garbage or a simple water tank. And for craftsmen and people with fantasy, a metal barrel is excellent material for creating useful and beautiful things that will be useful in the farm.

The easiest option is the flower bed in the painted barrel. It is not necessary to make much difficulty, but in the end it will work very beautifully.

Which of the children stand in front of this is the real train, where the barrels got the steers, the seats and were put on the wheels? The rhetorical question is most likely, you will have to roll all neighboring children, because your own exactly boasts the creation of Pope.

Metal barrel can become a roomy storage. If at home this option of the chest seems to be too brutal, why not adapt the barrel to store all sorts of instruments in the garage.

The nest for non-masters in a barrel is also a good option for those who are engaged in breeding poultry. Just do not forget about the litter.

Furniture made of old metal barrels - a separate topic. What are just not made from these items - armchairs, garden benches, coffee tablesEven sofas and bar chairs.

Convenient and durable option to create a coach for washing at the cottage or in the summer kitchen. If there is no possibility to connect the water supply and drain - you can always adjust the metal barrel as a base for the colorhouse.

As you can see, metal barrels are excellent material for creating a variety of functional items. We hope our photo creation will inspire you to create something like that, and perhaps you will be able to make even something more creative!

Homemade metal oven 200 liter barrels: drawings, stove scheme, photo and video. The barrel stove can be used to heating garages, work premises, greenhouses and other premises.

Standard Metal 200 liter barrel has a height of 860 mm, diameter 590 mm and weight 20 - 26 kg.

Dimensions of the barrels are almost perfect for making a stove from her, the only nuance is the thin walls of the barrel 1 - 1.5 mm, which will quickly run away from high temperatures. As an option, the furnace can be from the inside to lay refractory bricks.

For the manufacture of the furnace will need:

• Two 200 liter barrels.
• Door for the oven.
• Copyright.
• Sheet metal, corners and rods.
• Pipe for chimney.
• Refractory brick.

Instruments:

• Bulgarian with cutting circle.
• Welding machine.
• Electric drill.

Stove of 200 liter barrel: scheme.

Bulgark cut off the top of the barrels and cut out the side opening under the fuel door.

Welding machine welded the flue door to the barrel. At an altitude of 20 cm from the bottom of the barrel, we install trees for ash.

Under the roller, you can make a separate door, opening it, you can adjust the force of thrust in the furnace.

So that the metal walls of the barrels do not boost over time, you need to lay out the inner surface of the furnace with refractory bricks. To more tightly adjust the bricks they feed them with a grinder.

To masonry the chimney labyrinth, you need to cook from the corners of the crossbar under the bricks.

Bricks are laid out on the furnace mortar. The composition of the furnace solution is 1 part of clay on 2 pieces of sand, the mixture is mixed with a minimum amount of water to a very thick consistency.

The thickness of the seams for masonry should not exceed 5 mm.

The old barrel turns into: dog Konur or Lena, mini-bar, chair, stool, pouf. From this container, you can make it easy to furniture for home and cottages.

How to make a coneer, a layman for dogs from a barrel?

Kennel

Sometimes old wooden barrels throw out the owners of the stores. After all, such a container over time becomes unsuitable for storing cucumbers, sauerkraut. If you find such a trophy, then the loaf for the dog will cost almost for nothing. You can cheap the old barrel and also to save perfectly.

1. But it is necessary to wash well inside and outside, give it to dry out for several days. So that there are no drafts in the dog's house if the boards diverged, connect them.
2. If the slots are small, you can put an open barrel in the reservoir, placing inside the stones. The tree wets for 3-5, fill the slot.
3. The dried container needs to be covered with an antiseptic and dry again. And if the barrel in bad condition, at first to treat its surface with emery paper. Now on the one hand, the hole is cut out of this size so that the dog is free to pass. Based on its preferences, make it round, rectangular or in the form of the arch.
4. Align the platform to the coneer, pour rubbank here. And better - put the plates.
5. Old barrel must be well fixed. Put 2 thick timber on the prepared platform, attach it to them. You can make two volumetric legs from the fortune, fix it on them.
6. If you own the jigsaw, cut the jewelry from the tree to enter, for a cone, attach them with self-draws.
7. If there are no cracks in the barrel, and the precipitates do not register it, you can leave a dog house in this form. If they are and for reliability it is better to cover the roof of the tale or polycarbonate. You can make a 2-stranded roof of wood, and then cover it with any of these materials or using others.

This is how it is not difficult to make a cone with your own hands from the old barrel. If you are looking for an even simpler version, then look at how to make a bed for a dog from the same packaging.

Lena

As you can see, it can be created in two ways, cutting along and across. But first, it is also necessary to prepare a container, washing out, drying, painting it with an antiseptic or varnish.

1. So that the dog is convenient to get, make a cut in front of the bed a little more than in other places. Treat the cut surface so that there are no sharp parts and the zoom. This cutout can be direct or rounded.
2. If the dog is big, then cut the barrel not across, but along. To fix the edges, bring a horizontally consideration with one and the other. Unlike the first option, such a launcher is unstable. Therefore, attach to it from the bottom of the brows or curly legs, it will turn out beautiful place Pet rest.
3. Located inside the woven, so that he was gently sleep. You can sew a mattress in a rounded lay. To do this, measure the diameter of the barrel. This size cut out two circles from the fabric. Determine the size of the arc, such a length cut out the strip from the same material.
4. Sew it on the side to one and the second circle to connect these details. Leave the gap through which to put a soft filler - synthetone, holofiber or the like. Sewing a hole in your arms. A similar mattress is shown in the second top photo of the right. And under it is another.
5. In such a mattress, soft edges. The dog will be located in the center of the Lena and will not touch the sides of the barrel. To do this, you can start creating a mattress, as in just a telted version, but to stop the inner circle, leaving some of it not sewn. Insert the filler here, squeeze the hole. Now fill out the external ring using more filler, squeeze the hole.

Coffee table from the old barrel do it yourself

It can also be created by putting on the bottom or sawing in half. One old barrel will turn into two identical table. Skolmet the curly legs from the squad to fix the workpiece. Put a wooden countertop on top, fix it with self-draws. To achieve a single style, paint wooden table details in one color.

For the second idea, such a container is collected across in half. It turns out the blanks for two tables. The tempered glass is placed on top, so that it does not go, use special fixing gaskets.

To decorate the table, we can put on top of the barrels wooden wits, beautiful pebbles, shells or photos, and cover with glass from above.

If you need a high table, then do not spawned a barrel, but to make it one-piece, so can even be used as a bar rack. By the way, if you want to make it, it will come in handy and inner space Tara.

Make a vertical cutout in an old barrel. Remove the separated element. Attach to it and to the loop barrel, hang this door by fixing the handle on it. Inside Make a round shelf or use a bodie cover for it. It is possible to artificially be such mini-edge, covering it with a versatility of the appropriate shade.

If you want to make a bar rack even higher, then screw the legs to the cover, lock the table top on top to the container. Under it you can store glasses, beer mugs or other low items for a home bar.

If you cut the table top, one edge to attach to the bar to the wall, the second put on the barrel, it will get a big table.

And do not throw out the remaining round trimming from this container, and attach to the wall. Make inside this hoop section of the section. Here you can store bottles, putting them horizontally.

Old barrels in interior decoration

To give the place of uniqueness also use old barrels. The trim of this container will become an interesting decorative element, if you attach it to the wall.

And the rest will turn into a bedside table. You can paint it into the desired color.

And the decoupage technique will allow the use of Provence style to turn your bedroom in a quiet corner of France. To do this, take:

• napkins with a drawing "Provence";
• pVA glue;
• water-based lacquer;
• tassels.

Remove the top pieces of napkins - only they will need. So that these thin paper parts do not break through, lubricate the PVA not them, and the barrel parts that will be decorated. When the glue dries, cover the surface of the napkins with aqueous or decoupage varnish. You can use special, with the effect of cracker. Small cracks will allow the effect of antiquity.

You can do not alone, but two bedside tables for spouses.

If you cut off one small side of an old barrel, put this place to the wall to the wall, it turns out the original washbasin. Of course, in its top it is necessary to make a hole for the sink and a small door below to serve it and store it here. detergents either trash can

Homemade comfort begins right at the entrance to the room. Put on both sides of the door on the barrel, so that homemade and guests folded here for canes, umbrellas.

In the kitchen will also be unique, if you use this container, boards, cover it all the same verse.

Leave the bottom of the barrel, drinking her sidewalls to get legs. That's what a stylish stool can be made with your own hands.

And as you can see, not only it. The cozy chair will work out if the top part of the old barrel is curly. Metal hoops bend so that they turn into the legs. The back and seat are made soft, using foam rubber and furniture fabric.

You can make a folding lid in the seat to store different little things here. If you want to facilitate work, then you need to make a pouf of half of the barrel.

You can use its individual items to make the bar chairs, stools, a rest chair. For this, the old barrel is subject to reconstruction, the side boards are removed from it, then use them.

If you have even minor details from this container, they will also be useful. Make from them container for fruit. And if you attach the one hundred killed on the side, you can put a bottle of wine here. In the skillful hands, individual elements of the barrel turn into a suspension for the fuels.

But what original chandeliers make out of old barrels.

Ideas for giving from old barrels

You will have wonderful country furniture if you become using this container. For tables and shops will rise by hundreds of a barrel. For this, it is first washed well, and then disassemble. The legs make from bars, but the connecting elements for them are all from the same old barrel. You can cut a large sidewall in it, leaving small on both sides, instead of the seat and backs to attach cut outstands and relax on such a rocking sofa. And the rocking chair on the three legs you can also make it possible to make me out of such a container.

If it is planned to be a feast, put the ice bar in half, place the bottles here. Guests can enjoy cool drinks on a hot day.

And the second half of this container will become woodcut. This is how the branches and materials for extracts will be neatly lying.

Rainwater is good for watering, for washing. Put the barrel under the drain, let it be recruited during the rain. You can make from the old barrel and decorative pond, putting here water plants In pots or, placing artificial.

To make it easier to use such a container for watering, wash your hands, make up the faucet at the bottom. Then you need to put this container at half another barrel so that the crane is in the desired height.

As you can see, hanging washbasins from this material will be perfectly shrouded in the country. Here, the old barrel will turn into a landscape design element.

To make a flower garden, like on the top photo on the left, you will need:

• barrel;
• instruments;
• antiseptic;
• brush;
• bars;
• self-tapping screws or nails.

Master class of manufacture:

1. From bars, make a rectangular basis for the original flower bed. Put on it half a barrel, fixing, after taking the hopping of the sidewall that. Inside, pour the lands, put flowers.
2. For the next flower garden, a completely old barrel will be combined. It is placed horizontally, poured inside and beside the soil, plant flowers. You will achieve an interesting effect if you plant the flowers of blue color, and near the barrels in bulk the blue stones. It will seem that water is poured out of it.
3. Put the barber or in the ears of the bar or the barrel of the old tree, the neuroprian stem. It turns out an old castle, in which birds are happy with pleasure.
4. Remove some wooden elements from the barrel to take the resulting space with flowers. Pour the bottom to be solid, pour the soil here.

Take the following ideas for welcome:

1. If you have left the bottom of an empty barrel, pick it up in half, cut the construction of the wall. You can fix with screws. Put this flower garden plants.
2. You can make a vertical flowerbed, putting woodenons in a part of the barrel almost in chaotic order.
3. And if one is placed horizontally, the second vertically, from afar it will seem that the top in the lower is striking the color flow.

Hammock and swing in the country are simply necessary. To make a hammock, take:

• barrel;
• strong rope;
• drill;
• self-tapping screw;
• veil;
• brush;
• saw

Next, follow this plan:

1. Remove the hoops from the barrel if one hundreds of different lengths, with the help of a saw, give them the same size.
2. Cover these details of the Morilka, let it dry. You can use and varnish.
3. From one and second end, the hodges drill, thread the rope here, fasten it well. Tie reliable loops at the ends, hang hammock.

To make a swing in the country, you will need only 3 hundreds of barrels. Prepare them, screw the fasteners here, fix the rope on them.

Stylish dacha furniture, consisting of a low table and chair, will work out all the same packaging. For the table, only the upper part of the barrel will be required, and for the chair - separate homes. By the way, if you arrange them like on lower photos, It will turn out the original chairs that can be folded and folded.

Crafts make out of old barrels gas stoves. Of course, in such work, you need to follow security measures. And relaxing lovers in nature with beer can make cooling devices for this drink by making a horizontal or vertical door.

That's how much useful and creative can be made if you have an old barrel or several such tanks.

What else can be done for giving with your own hands from the old wooden barrel, look in the video below: