Reading time ≈ 6 minutes
Most recently, the market of modern youth gadgets blew an anti-stress toy, called spinner. Despite the large range of the goods offered on the shelves of stores and Internet resources, the option to create a spinner with your own hands looks very attractive, because it will not only save on the product, but also get the desired twilight according to your ideas and fantasies. There are a lot of spinner options with your own hands at home, consider the most popular of them.
Original Ty Toy - Fidget Spinner comes from english word. Spinner, which means rotation or crash. It is one, or a few bearings that help with their rotation not only to pass the time, but also to improve the motility of the fingers, dexterity and attentiveness. The analogues of Spinner can be called the old good yo-yo, which at the beginning of the 2000s could be found in the hands of everyone. Now one of the most popular places among fashion trends They occupy the spinners, on the agility of contact with whom various championships are already held.
The initial purpose of Spinner is a toy for youth, a bauble, contributing to the corortion of time, however, this turntable turned into something more. As practice shows, Spinner is an excellent helper in the fight against bad habits. This applies to the abandonment of smoking, sickling with fingers and many other unpleasant moments associated with the fact that a person needs to urgently take his hands to any matter. As a result, the twist of Spinner became a real hobby for many people who not only master the skill of rotation of the toy, but also compete in this aspect among themselves.
The main task of this product is its rotation, which should be long and occurred without much effort. The basis of foresight rotational motion Toy, is the bearing, which is located in the center. So that the spinner would twist and beautifully, he should have right shape and amplifying cargo. Typically used three weightlifiers, evenly remote from the center, however, you often can be found spinners and with two or four cargoes. It is important to note that the spinners do not require batteries and twisting batteries. If the toy is performed in the right way, make it rotate around its central axis will be able to a light click of the finger. The most important thing in normal operation of the twist is the observance of symmetry, because even a small deviation of the sizes of the sides with weighting agents will lead to poor and unstable rotation.
Production of this twist is not difficult technological processrequiring special knowledge and tools. The main material is one or more bearings, and the options for the implementation of the base there is a mass. The main nuance of this process is the weighting of the edge of Spinner, because otherwise he will rotate badly. For weighting, coins, nuts or other bearings are perfectly suitable. An important detail For hand spinners is a bearing lubricant, which allows several times to increase the speed of rotation of the toy. It is recommended to lubricate with oils intended for motorcycle chains. If this does not turn out to be at hand, you can use the WD-40 tool.
In order to decide on how to make a spinner with your own hands, first of all it is necessary to determine the basic material. Steep spinners are obtained from a wooden basis, which, with proper and high-quality processing, is not much different from the factory analogues. To begin, it is necessary to create a drawing of the future product. In its framework you need to take the diameter of the bearing and three weightlifiers, pushing out in the future from these numbers. The sketch of paper on the wooden workpiece is carried out, with the help of a jigsaw, you need to cut the future spinner.
Holes for metal parts are drilled on a special machine or with a feathery drill. For ease of operation, the workpiece must be carefully polished and polished. Reliability of the finished toy will betray the fixation of metal spare parts to the basis of epoxy or any other glue. In order for the spinner to be comfortably twisted on the finger or any other surface, it is recommended to apply decorative linings on the rotating part of the bearing. From the primary materials, two ordinary buttons of the appropriate size are perfectly suitable for this role.
An attractive manufacturing option is to create spinner from bearings with your own hands. Firstly, this method does not require various extraneous materials, except for glue and four bearings, one of which will play the role of the central axis, and the three remaining - weightlifiers. Secondly, this method will not require long time, allowing you to get a spinner in 5 minutes of work.
The only difficulty of the process is the bad gluability of metal parts among themselves. For reliable fixation, additional thermal processing will be required, which is often difficult at home to ensure. After gluing, the excess glue should be removed with a file or supfil, thereby removing all the rough surfaces.
Hot glue is an excellent basis for homemade twist. For the manufacture, you will need a set of weighting agents, bearing, hot glue and the base that performs the role of the soils (usually is made of thick paper or cardboard according to the drawing).
An important point is the installation of metal parts strictly in the center of its area. Then glue is poured into the form and expects full frost there. After hardening, the paper circuit is removed and the spinner grinding is performed to a completely smooth surface.
To perform a homemade spinner, not only hot glue can be used, but also epoxy in the floor has solidified. Plasticine glue not only connects the bearing and weighting agents, but is the basis for torque.
In this process, it is important to position the metal parts correctly, it is better to use in advance marked wooden board from drilled holes and inserted locks. The main excess glue is better to remove it until its complete solidification, then polishing only small roughness. 
The simplest I. a budget option independent manufacture Spinner, this is a work with plastic clamps that are designed to tighten the cables. For convenience, it is recommended to use metal weights of the same diameter as the bearing. Wealers are laid out three corners of the equilateral triangle, as shown in the photo. Around them creates the basis of three closed screeds. Then, each of the weights is attached to the base, also with a plastic clamp.
After that, an axial bearing is installed in the middle and a uniform tutting of the clamps from each weightlifter begins. For reliable fixation, the resulting design is tightened by three more clamps, from the center to each of the sides of the weighting goods. This method of manufacture, although the most inexpensive and fast, however appearance The finished product is significantly inferior to analogs from other materials.
The manufacture of spinners of the medium density fibreboard on its principle is very similar to working with a wooden blank. At the beginning of the process, on small sizes, the MDF sheet is made of marking, taking into account the placement of metal parts and the total size of spinner. Then the holes for the central bearing and weighting elements are drilled and the size approached the final one is adjusted.
It is worth noting that when processing and drilling a MDF sheet, you need to be more attentive and neat than when working with a tree, since this material fragile and brittle. To learn an aesthetic type of finished product, it is recommended to paint it, while in front of the painting spinner must be pre-engaged and degreased.
Spinner, spinner .. all as if crazy. What it is? Where did you come from? And most importantly for what? Today we will try to figure it out ... one person came up with him. Now the whole world goes crazy, people buy, children like.
When I was small, I really liked to twist the top. Will you get some gear more of the old hours and start to twist - who has longer? Familiar? We sit and look .... Although your feelings in childhood.
Approximately the same sensations arise with me when the spinner is rotated. Were cool and look. Yes, and the spinner is essentially a top. Only the top is on the axis. And the spinner is twisted in the horizontal plane. Anglo-Saxons love to use the word "spin" (rotate, contact).
They have "spin" everywhere - from quantum mechanics and physics - to this simple thing. To horror is simple. And we have a top, and many other analogies ..
Who rewrought a cassette pencil, that spinner does not buy!
Time does not stand still. Our children are no longer known about all sorts of tape recorders, tops. There was such a new-fashioned thing. And there is every reason to think that the spinner will soon turn into an element of the style. Maybe soon we will see the spinners not only with LEDs, but also gold, with rhinestones, maybe even with pubers ..
Now such an interesting time, you can expect anything. If the demand for platinum spinners will appear, I will not be surprised. Online stores are already traded by products for 3000 rubles ...
Constructive spinner is very simple. Imagine a star in the center of which the bearing is installed. Star petals balanced. In each ray, you can insert along the bearing. And twist yourself. Add brightness with bright colors and here, the spinner is ready.
It is necessary for the entertainment and during idleness. If you are in the "trend", then of course in order to stay fashionable and stylish. Initially, he wondered as an anti-stress calming agent. What corresponds to reality. It can be twisted in different ways - on the table, in the fingers, on one finger ... While he is spinning, you look, how it does it, and your head at this moment becomes absolutely empty ... and this is a holiday friends. Let for a moment, but rest.
All your attention switches to spinning petals. Maybe for this reason in our age stress, this simple children's toy has become so popular throughout the planet ... Who knows? Children love spinners for brightness and for this ... Now many sellers serve this attractive product as a kind of "means". This is what sellers write:
So, if you want to relax and get an expensive exclusive product, then forward in online store. I am sure that we are very looking forward there. But Russia is such a unique country. Our person can not sometimes come in to go and buy this simple piece. Our person does it himself.
Because when you did a thing myself, (even the simplest), to her a completely different attitude. Such a thing, for example, it is always sorry to throw out ... By the way, when something crammed myself, it is also sometimes relaxing and distracting. We will do the spinner with your own hands to distract and experiment 🙂
Materials Friends may be the most different. But the principle is one - the center is worth the bearing. In order to ensure a long and easy rotation, the toy must be balanced, and the bearing should not contain a thick oily lubricant. Here is one of the manufacturer's options:
You need to buy four bearings (three will be as opposed to)
It will take a drill on a tree, (Pyro) with a diameter of the same as bearings:
Even - we will need the material itself from which the hull is made. He can be anyhow. The main requirement strength, and easy processing.
Material Place the pencil about this:
We continue to rotate the drill (the same spinner):
We will make the usual drill additional holes (for intricate design):
The billet should be drilled like this:
And before landing in it bearings look like this (if you can work beautifully, you need to try to round the corners):
It is necessary to prepare the central bearing, remove the factory lubricant from it.
After removing the protective covers from the closame, we glit it in gasoline or acetone:
Then you need using a suitable glue (superclocks not all plastic glue!) Epoxy or other, carefully glue bearings into place.
Something like this:
Here is such a brutal, "male", harsh, spinner turned out.
We watch the video for the manufacture from beginning to end:
As can be seen, each experimenting as it can :) :). There is no limit to perfection! There would be a desire. Both samples are well spinning. More effort will go on good design. Hooray!
According to my feelings, the purchased spinner is impossible to break. Bearing is pressed into the metal case; Counterweights are glued or pressed. The weakest link is the bearing. He can rust if the kids dropped and rinsed it in the water.
It is clear that if the spinner is self-made as in the example we simply lubricate and develop the bearing until the entire rust leaves. Passed bearings glue re-normal glue. In severe cases, we use the rust converter and lubricate until the previous "driving" quality. In the case of purchased spinner, carefully remove the cover or cap that is always present there:
For the clip weaving liquid household lubrication for locks and so on. If rust is a lot, you can throw in a jar with butter, let them lie down .. that and all the repair.
Experiments continue on the wave of universal hobbies toy. Someone again connected two different areas And the spinners began to do from paper. By the way, just such crafts develop motility and everything else in children.
Therefore, you can get your child just the manufacture of such original things. From paper it will be safe for the child. True, a slightly disposable. Colored paper:
Action first:
Action Second:
FIRST ACTION:
Fourth action, axis:
Action Fifth, "Bearing" is the same of the paper, which confirms that the Japanese - creative people 🙂
To figure out what, we watch the video.
Handsomely. And fascinating to do such things.
Our people are talented and smeared. All to the farm! Do not throw anything! Choose a bitch and moreon!
Everything is simple, the principle is the same, the material is different.
We make time:
We do two. You need to drill and clean the hole at the bottom of the lid, and glue:
We glue only three plugs, the rest use for alignment and symmetry of the first three. It should turn out something like this:
It is necessary to bring everything in the divine look and after starting the assembly of the product. We also welt bearings in acetone then we collect.
When everything inserted, glued check:
Works .. 🙂 But, friends are the easiest way. There are very exotic but interesting ways to manufacture spinners of plastic traffic jams. Watch the video.
As they say, there would be a desire. It remains to say that in any creative process there is no limit to perfection. Make a spinner of wood, metal, cardboard, concrete ..
While the ball bearings are produced, we can create anything. All creative work gives pleasure to those who do it. Do with pleasure, and then everything will be fine with you. See you on the blog pages. If anyone has links to interesting options Homemade Spinner, please leave in the comments.
Spinner of bearings
The main rules for the manufacture of a relevant turntable: the central bearing; Radially located sleeveners.
With some skill, you can make a spinner based on four bearings. Buy them in a sports store where the consumables are sold.
Prepare a toy center: remove the anthers knife on the sides and place the item for 3-5 minutes into the solvent. To get rid of lubricant, clean the bearing with a toothbrush and swell carefully with a rag.
Superclamp attach the blades to the prepared center. If you try, you will be able to make a spinner even better than the store! Creative place it, for example, enclosure with a color cord.
How to make a spinner without bearing
It is very easy to make spinner in from four plastic bottled caps of the same size. Future gadget blades will serve as opposition, so fill them with plasticine and pour out glue-guns.
In the center of the fourth lid hot spin, do a hole. This detail is the middle of the homemade spinner. Stick three blades to it. After that, perform the axis of Spinner.
Make two segments of the rod for the adhesive gun, each in a centimeter long. To half the toothpicks, suck the center of Spinner, from two sides to the axis, put on the segments of the adhesive rods. Color the gadget with acrylic paints.
You can make the center of spinner bearing, which is attached to a pre-cut from plywood form. Excellent blades will get coins from the combined among themselves.
On the Internet you can find instructions, the spinner of cardboard, using the Origami technique. To create a collection of unique gadgets, show fantasy and try to invent new ways to produce turntable toys.
Interesting facts about spinner
Do not have children from me, answer the question of what a spinner is, I would be difficult.
But our children always know new trends and as crazy catching new epidemics, immersing to the course of the us adults. So I had to find out what kind of thing so and why he is generally needed.
I was interested to know, but whether the older generation knows about Spinners and I asked his father if he knows what it is and what thoughts came to his mind.
And that's what he replied:
« I once watched as my dog \u200b\u200bhit the paught of the bike pedal and that was rotated with a slight buzz. He fascinated him for ten minutes, then he was tired of him and he was hammered by a coneer cooled to a blank lesson. Now, seeing the Sport, I remember my dog \u200b\u200band I am very staring comparing them. Fashion fashion, but stupidity should have borders«.
Well, at the expense of stupidity I do not know, let's go, we'll figure it out in order ...
The spinner itself is a rumbling toy with a bulk, inside of which the bearing is located, allowing to unwind burst to high speed. The functionality in such a toy is striving for zero, so the children arrange speed tournaments, whose spinner will develop a greater speed, which will be "cool".
Several interesting finds from Aliexpress. Spinners are so popular now that they are made not only from plastic and metal, but also modify, embeding Bluetooth to synchronize with smartphone and speakers Material from which this turntable is made by the most diverse, plastic and brass, and stainless steel, and copper, but anything.
The number and shape of Spinner blades is also the most diverse, for example, in the classic version of "Spinner" has 3 blades, but also two - and six-blade options or simply round, cubic forms. And for greater effect, the LEDs, bluetooth, speakers are inserted into some. What you will not come up!
And the handmaders manage to insert in the blades of the blades, knives, make the spiners from everything that falls at arm.
Here is one cravers managed to make a spinner from the cycling chain, and I must say successfully coped with the goal.
The guys from Novosibirsk, apparently, the periods are also boring and not knives, but cars.
In practice, it did not show any results, he simply began to fall apart in parts, I think it was immediately clear that the welding is not such a durable thing for such clauses. Stupid, right?
And some guys - Utyubers really risked, replacing the blades with very sharp knives, at first they just spinned the spinner, then the bad heads visited the thought of wrapped the burst with a material impregnated with a combustible mixture and unwind this spinner in a burning state, this is already from the fire show.
This is not necessary to repeat. This is dangerous! Especially, protect children, from viewing such a video.
You can argue for a very long time about the danger of these toys, because people for some reason begin to invent rather extreme tricks with spins. The speed fascinates, I want to experience the spinner on everything that he is capable and sometimes the issue of security is somehow goes to the background. It turns out that the danger of the toy is enclosed in the heads of her testes. Someone, trying to smash the glass spinner, forgets that the shard from the glass can bounce and get into the face or spinner itself at high speed can be chopped from a solid subject to the test body.
Is a toy dangerous for a psyche of man?
Why did this question mean this question? Have you heard something about the danger of a wolf? Surely you had to expose your psyche in childhood, playing with rotating toys? With the same button, for example? I imagine, a psychologist sits and says: "Never look at the helicopter, it is dangerous for your psyche" Wow ...
At the expense of the development of small motility spinner. If we are talking about the spinner, which just bought a child, then no motility was involved in this, and if the child collects a toy himself, something glitters, cuts out, it agrees 100%.
I looked at my children, they showed some interest, twisted and put these spinners on the shelf, where they are so dusting, waiting for a re-meeting with children, but it seems this will happen soon. I think that the danger to the psyche is very fetched.
It is difficult to answer this question. But it makes no sense that if a person has some nervous tension and he used to bite his nails or break the pencils, then these stupid habits can be replaced by spinner spinner, but not to affect such behavior.
The price of the question begins from 29 rubles , usually people Orders them on Alliexpress. But how and everywhere there are madmen, which, with demand, such a gorgeous offer can be done:
The spinner itself consists of a housing and tide, so it is logical that the plastic case may be damaged or the bearing mud is damaged. 
If the body broke, then the superclauses will help it, and clean the bearing can be WD-40 or alcohol, after that it is necessary to lubricate it with synthetic oil.
1. It is necessary to remove the lid and the bearing buttons. Usually, the lid is fixed on the thread,
Therefore, in this case, it is simply neatly neatly on the one hand, it is necessary to fix it, and on the other, it is gently spinning.
In some models, the fastening of the lid is made by a magnetic, such a cover must be opened, carefully separating it. Under the lid, the bearing is protected in the form of a plastic or metal partition, which is easily removed if it is easy to pick up something thin.
2. In case the bearing is fixed inside the row of the sealant. Do not try to try to discard him, as you can decline the SNIPPPER. In this case, it is necessary to wash the non-aggressive tool so as not to damage the case, the isopropyl alcohol is best.
1. Pour the cleaner on the balls and scroll them to the liquid cleanse the balls from all sides.
2. We rinse the bearing, drying it with a hairdryer (a towel or wipes for drying will not fit, as small patches and dust will fall inside). Lubricate the bearing with synthetic oil, for these purposes there is enough single drop.
To make a spinner yourself, it is necessary to think out what material you would like to create it. The easiest spinner can be made from the girlfriend, the fact that in any house can be found without much difficulty.
In any case, first you will need to make a drawing of a future toy. In this case, you need to show fantasy and some skills in drawing. But it can be done easier: to circle already ready drawingdownloaded from these drawings:
SAMI simple model Spinner, the one in which the axis bearing is replaced around which the uncomplicated turntable is spinning, in such a design you will not even need glue. Simply, either collect, or cut out the housing itself, by making a rod hole in the middle (axis). Grind the rod and toy is ready.
For spinner of paper, we will need two colored squares of paper, 15 per 15 cm, prepare the toothpick as the spinner axis and a pair of cap clamps from the rod of a conventional writing handle.
According to the scheme, we make the housing of the turntable, then pierce the hole in it with scissors, we slightly expand this hole so that the axes are free to enter it.
Another option Spinner We offer you to make cardboard. Below step-by-step instruction with photo.
We manufacture therapy pattern from cardboard, for this we supply any cover of the desired diameter, then inside this circle, we draw an equifiable triangle and on each corner to the circumference with the circle, thus we get a three-point workpiece of our spinner.
Then I bring the form of Spinner to the desired and decorated our spinner as our fantasy will tell us.
Another of the species of the Cardboard Sport - on a rope with buttons or without it.
We make a blank of cardboard in the form of a circle, paint as a fantasy will tell us, then apply a button with two holes and pierce our workpiece in the necessary places with scissors, after the dissemination is ready, we glue the buttons with glue, then you turn the rope into one digest and pull out the other, We associate our rope. If you do not have suitable buttons, you can simply make two holes and sell threads in them.
For this design of Spinner, we will need caps from bottles, depending on the amount of burdocks from 4 to 7, four bearing size of 6000rs, drill, knife, sandpaper and adhesive gun.
We make a hole of the required size for the central bearing in the traffic jam, glue the plugs with each other, insert the bearings into the lids, fixing them on the sides inside the plugs.
The design of your brainchild depends on your fantasy.
If you have something to add, write in the comments, discuss.
Open any site where there is information about Spinner, you will read that allegedly the toy came to us from America (that neither the virus, then American).
This is not known who the inventor of this toy, e just believe Wikipedia, then the inventor of Spinner Catherine Hettinger, who came up with the prototype of this turntable for his daughter.
In his interview, a woman every time came up with new versions of what was influenced by the idea of \u200b\u200bthe idea of \u200b\u200bSpinner.
Scott Mac Koskry, according to the same Wikipedia, came up with a rotating metal device, which he said helped to cope with the excitement before responsible performances or meetings.
I will tell you more, the prototype of this toy is more than 5,000 years. Her predecessors were found on the territory from China to Venicela and Israel, and what to go far, do you remember your childhood? This I appeal to those people whom children consider dinosaurs who rewrite cassettes for a tape recorder with pencils. In our childhood, the spinner was also, but he didn't have this name, remembered?
Well, if I tell you a word - a button?
Well, yes, they remembered, here he is our beloved ... And we are his fouls and plipped all sorts of things to the button, to see how they will twist, our children simply pass the same stages, but already with toys that have passed evolution, in parallel with our brain. Yes, it seems that this is the toy with which 5000 years played and will play for a very long time.
Another interesting fact There is about the same spinner, and it will be about Biophysics Manu Prakas. He visited the hospital in the avail, turning attention as a centrifuge from the laboratory, intended for the separation of blood fractions, simply pinned the door, because there was no money for banal electricity.
Manu thought not long, he experienced a paper spinner, though he was completely not like that, but the essence of the same.
Based on paper disks and ropes, the manu team was created by paper, which developed the speed of 125 thousand revolutions per minute, this is despite the fact that the centrifuges in the laboratory develop speed up to 16 thousand revolutions per minute and at the same time they are not cheap, and if you are not cheap paper, the price is simply translated.
This paper does not make any particular difficulties, says the mana team that submitted an application to the Guinness Book of Records to place its super invention.
If the Internet had been developed in my childhood, it would always be wisp to talk about the dangers and benefits of Yula, plastic dolls or some more mass passion.
The essence of the dispute is harmful, the spinner is harmful or not worth the embroidery egg, just there is an excitement around the novelty and make a piracy on this. Everyone who is not too lazy: psychotherapists who have a lot of time and effort with a version of personality to be offended, bloggers Fingers, destroy the car or set fire to your home, but about everything in the apart.
The conclusion can be done one: if there were no toys in children, the world would stop in its development.
Do you have such a toy at home? Write your opinion below ...
