Not always household heating units are able to meet the needs for thermal energy of large buildings. Boilers Termotekhnik TT100, TT50 and TT200 are designed for heating large areas with minimal cost.

The design of the Termotekhnik uses a special internal organization, allowing several times to increase productivity and other specifications.

Why high power boilers are needed

In general, domestic heating units can effectively heat rooms up to 1000 m² in size. To increase productivity, it is necessary to connect several boilers in a cascade bundle, which is not always profitable, requires more maintenance time and often leads to excessive fuel consumption. This problem can be solved by installing an industrial steel hot water boiler Termotekhnik TT100 from Entroros.

The main purpose of the Thermotechnician station is the heating of industrial and administrative buildings large area, heating small towns and cities. Maximum performance 5 MW. Installing a station is much more profitable than purchasing several boilers and connecting them to one network to obtain the required power.

Model overview TT100

Hot water three-way boilers Termotechnik type TT 100 are connected to the heating system closed type. In this case, the maximum heating of the coolant reaches 115°C, the working pressure in the pipeline is 0.6 MPa. The basic package of the station includes:

• The block of a copper - is made of the high-strength steel steady against hostile environment.
• Burner - allows you to smoothly adjust the intensity of the flame and control temperature regime avoiding overheating and hypothermia of the premises.
• Automation - the entire work process is controlled by a microprocessor board. It regulates the intensity of heating and gives a signal to turn off the gas supply in case of emergencies. Thermotechnical boiler safety automation is manufactured by the Italian company E&M, a world-renowned leader in the production of heating equipment protection systems.
• Security group- in addition to highly sensitive automation, valves and sensors are used to prevent emergencies.

A special boiler start-up program has been installed, thanks to which ignition is carried out by simply pressing a button on the control unit.

Installations differing in power

Although the TT100 station is the most popular, attention should also be paid to existing analogues that differ in power from TT50 and TT200.

• Thermotechnician type TT50- the maximum productivity reaches 950 kW/h. The modulating burner ensures stable operation at power settings from 350 kW.
  Steel hot water heating boiler Termotekhnik TT50 is a metal cylinder, along the perimeter of which there are fire tubes of the second and third passes. Ease of use is achieved thanks to the front doors of the boiler, which provide wide access to all important components.
• Steam industrial boiler Termotekhnik TT200- at maximum productivity provides production of 25 thousand kg. couple / hour. Economizer (purchased separately), allows you to reduce gas consumption by an average of 5%. Since the process of space heating is carried out with the help of steam, it is allowed to connect only to closed heating systems.
  The steam heating boiler Thermotechnician type TT200 from Entroros is equipped with an inspection hatch for visual observation of the liquid volume in the water chamber.

For safe mixing of water coming through the heating return, a special water-guiding element is installed. With its help, the heating surface is reduced and stable operation of the equipment is ensured without extreme thermal loads.

Safety is based on following the rules

The technical characteristics of Thermotechnician steam boilers significantly exceed those of conventional solid fuel equipment. But high performance is achievable only if all the rules and recommendations of the manufacturer are observed.

What should be paid attention to during installation and subsequent use of the boiler?

• Large gas consumption- indicates heat losses or incorrect settings. Requires referral to specialists. The fuel consumption of the boiler must be within the limits established by the manufacturer (indicated in the technical documentation) + 5%.
• Sealing the heating system- there are high requirements regarding the installation of the heating system. special attention paid to sealing joints and the use of high-quality heating elements that can withstand a pressure of 0.6 MPa.
• The entire volume of the combustion chamber must be cleaned at least twice a year, before and after the heating season. The presence of soot on the walls contributes to overheating of the combustion chamber and, as a result, its failure.

Potentially dangerous situations can be prevented by paying attention to the warning signals of automation.

Boilers TT100 from the Thermotechnik company are more profitable than conventional gas or solid fuel boilers, the savings reach 5-15%. The installation of steam equipment requires strict adherence to installation and operating regulations, as well as the cost of more quality installation heating systems. All costs pay off after the first season of operation.

Boilers Termotekhnik TT100 are mass-produced. The power of boilers manufactured by Entroros varies from 1000 kW to 15000 kW. All boilers of the TT100 series have a fire-tube design of the furnace and gas ducts, belong to fire-tube type boilers and are designed for installation in boiler rooms with a maximum coolant temperature of up to 115 degrees C and with an operating pressure of up to 0.6 MPa. The preferred areas of application for boilers Termotekhnik TT100 are industrial boilers. These include large boiler houses of housing and communal services, boiler houses of various production facilities and boiler houses that supply thermal energy to technological equipment of various industries. Boilers Termotekhnik TT100 are used both for heating systems and for hot water supply systems (DHW).
Entroros TT100 boilers are equipped with fan-type pressurized burners that provide automatic supply, ignition and combustion of fuel. To control the burner flame, there is a viewing eye in the front plate of the boiler, which allows you to visually control the combustion process in the boiler furnace. Boilers Entroros Termotekhnik TT100 can be installed in a boiler room of any capacity. This is due to the wide range of boiler capacities manufactured by Entroros.
In our company, you can purchase hot-water steel fire-tube boilers of the LAVART brand, produced by the Omsk plant of innovative technologies. Go to page Boiler equipment LAVART

Models of boilers of the TT100 series:

Boilers Termotekhnik TT100-1000 with a power of 1000 kW

Hot water boilers of fire-tube type. Water consumption - 57 m³ / h. The water volume of the boiler is 1.76 m³. This boiler is the smallest boiler in the TT100 series. Maximum temperature up to 115 ºC.

Boilers Termotekhnik TT100-1500 with a power of 1500 kW

Water-heating steel gas-tube boilers. Water consumption - 86 m³ / h. The water volume of the boiler is 1.86 m³. The boiler is mass-produced and is one of the most popular Entroros boilers. Maximum temperature up to 115 ºC.

Boilers Termotekhnik TT100-2000 with a capacity of 2000 kW

Heating boilers of gas-tube-smoke type. Water consumption - 115 m³ / h. The water volume of the boiler is 2.8 m³. Coppers are made and delivered under the order. Maximum temperature up to 115 ºC.

Boilers Termotekhnik TT100-2500 with a capacity of 2500 kW

Steel three-way boilers. Water consumption - 143 m³ / h. The water volume of the boiler is 3 m³. Boilers with a maximum operating power of up to 2.5 MW. Maximum temperature up to 115 ºC.

Boilers Termotekhnik TT100-3000 with a power of 3000 kW

Steel boilers. Water consumption - 172 m³ / h. The water volume of the boiler is 4.1 m³. Boilers with a maximum operating power of up to 3 MW and a maximum overpressure of water up to 0.6 MPa. The maximum heat carrier temperature is up to 115 ºC.

Boilers Termotekhnik TT100-3500 with a capacity of 3500 kW

Russian industrial boilers. Water consumption - 201 m³ / h. The water volume of the boiler is 4.6 m³. High quality fire-tube boilers. The maximum heat carrier temperature is up to 115 ºC.

Boilers Termotekhnik TT100-4200 with a capacity of 4200 kW

Boilers of high power, up to 4.2 MW. Water consumption - 241 m³ / h. The water volume of the boiler is 5.4 m³. Steel hot water boilers fire tube design. The maximum heat carrier temperature is up to 115 ºC.

Boilers Termotekhnik TT100-5000 with a capacity of 5000 kW

Boilers Entroros Termotekhnik, industrial use. Water consumption - 287 m³ / h. The water volume of the boiler is 6.4 m³. Hot water heating boilers with high efficiency. The maximum heat carrier temperature is up to 115 ºC.

Boilers Termotekhnik TT100-6500 with a capacity of 6500 kW

Boilers TT100 of high power, manufactured by Entroros. Water consumption - 384 m³ / h. The water volume of the boiler is 7.4 m³. Hot water heating boilers with high efficiency. The maximum allowable temperature of the heat carrier at the outlet of the boiler is up to 115 ºC.

Boilers Termotekhnik TT100-8000 with a capacity of 8000 kW

Boilers Termotekhnik of the TT100 series, manufactured by Entroros, with a maximum power of 8 MW. Water consumption - 474 m³ / h. The water volume of the boiler is 9.6 m³. Hot water heating boilers with high efficiency. The maximum allowable water temperature at the outlet of the boiler is up to 115 ºC.
Read more ⇒

Boilers Termotekhnik TT100-10000 with a capacity of 10000 kW

Boilers of the TT100 series, Entroros, with a maximum power of 10 MW. Water consumption - 591 m³ / h. The water volume of the boiler is 12.1 m³. Hot water heating boilers with high efficiency. The maximum water temperature at the outlet of the boiler is up to 115 ºC.
Read more ⇒

Boilers Termotekhnik TT100-12000 with a capacity of 12000 kW

Boilers TT100, with a maximum power of 12 MW. Water consumption - 688 m³ / h. The water volume of the boiler is 15.5 m³. Hot water heating boilers with high efficiency. The maximum water temperature at the outlet of the boiler is up to 115 ºC.
Read more ⇒

Boilers Termotekhnik TT100-15000 with a capacity of 15000 kW

Boilers TT100, with a maximum power of up to 15 MW. Water consumption - 888 m³ / h. The water volume of the boiler is 20 m³. Industrial hot water heating boilers with high efficiency. The maximum water temperature at the outlet of the boiler is up to 115 ºC.
Read more ⇒

Everything boilers Termotekhnik TT100 have a cylindrical shape of the boiler casing, combustion chamber and gas ducts. For the manufacture of the TT100 boiler, high quality steel is used, which withstands temperature loads on the internal walls of the boiler. The design of the TT100 boiler, due to the completely washed boiler wall and toruspherical bottom, provides a high intensity of heat transfer. The front wall of the boiler is mounted on hinges that are installed on the right or left side of the boiler and allow the door to be opened together with the burner. This greatly facilitates both the scheduled maintenance of the TT100 boiler and the maintenance of the burner. The design of the boiler provides for the possibility of inspecting the boiler furnace and flame tubes. To inspect the fire tubes there is an inspection hatch, which is located in the upper part of the boiler. The second hatch, designed for cleaning the collector flue gases located in the rear wall of the boiler. In addition, the TT100 boiler has a large annular space, which allows you to create optimal conditions for heat exchange and distribution of the coolant.

Entroros boilers Thermotechnician TT100 are supplied in various configurations. You can purchase a boiler in the minimum configuration and in the maximum. Boilers TT100 in the maximum configuration are supplied with automation, pumping groups, valves, a set of sensors, a burner and other equipment. The price of the TT100 boiler and the amount of the discount are agreed upon additionally, at the stage of preparation and discussion of the commercial offer.

In order to buy a TT100 boiler, you need to send a request to e-mail or by fax, which are listed in the "Contacts" section of the site

Purpose:

THERMOTEHNIK ТТ100 – low-temperature three-pass steel fire-tube fire-tube boilers of various capacities (from 1000 to 15000 kW). Purpose: production of heating hot water with parameters: maximum overpressure - 0.6 MPa, maximum temperature - 115°C. The boilers operate on liquid and gaseous hydrocarbon fuels.

Properly thought-out fastening of the flame tube, combined with a large volume of boiler water and high strength guarantee a long service life of the TERMOTECHNIK TT100 boilers. Due to the low heat density of the boiler furnace, compliance with environmental requirements is ensured. The operational efficiency of the TERMOTECHNIK TT100 boilers is facilitated by high efficiency and low hydraulic resistance.

The priority areas of application for TT100 boilers are large heating and ventilation systems, as well as hot water supply systems for various municipal and industrial facilities.

Technical description:

Boilers THERMOTECHNIK TT100 are used for the production of heating hot water exclusively in closed systems heat supply.

Design

• Gas-fired boilers THERMOTEHNIK TT 100 are designed as three-pass gas-tube boilers.
• The boiler body and the cylindrical flame tube form the combustion chamber. Convective heating surfaces (smoke tubes of the second and third passes) are asymmetrically located around the combustion chamber. Thanks to the 2- and 3-core arrangement of the second pass smoke tubes, a high intensity of heat transfer is ensured.
• The design of the front cover of the boiler allows it to be fully opened with the burner installed in any direction. The open front door provides easy access to the fire tubes and combustion chamber during boiler cleaning and maintenance. Auxiliary guides are installed at the bottom of the lid, which makes it easier to close the door.
• The inspection hatch, located in the upper part of the body on the side of the coolant, allows you to inspect the fire tubes.
• The most optimal mode of operation of the boiler in the entire range of heat output is facilitated by a large volume of water in the boiler and a wide annulus.
• A burner plate for mounting the burner is provided on the front door. Visual control of the flame in the combustion chamber is realized through a viewing eye.
• A solid frame base ensures even distribution of the boiler's weight load.
• Laminated mineral wool mats with a thickness of 100 mm form a highly effective continuous thermal insulation of the boiler. Outside, the boiler is lined with a corrugated aluminum coating.
• Transportation and movement of the boiler during installation and handling operations is facilitated by the presence of lifting eyes on the body, installed symmetrically relative to the center of mass.

Specifications:

Boiler size	1000	1500	2000	2500	3000	3500
	1000	1500	2000	2500	3000	3500
Efficiency not less than, %	92
	115
	60
	0,6
	190
hydr. resistance, kPa	2,9	6,6	5,3	8,3	3,8	5,2
	0,29	0,65	0,42	0,65	0,71	1,0
Boiler water volume, m3	1,76	1,86	2,8	3,0	4,1	4,6
	57	86	115	143	172	200
	2980	3260	4680	5100	6960	7480
Flue gas outlet, mm	300	300	500	500	500	500
Water inlet/outlet, mm	125	125	150	150	200	200
Safety valve, mm	50	50	65	65	65	65
	G 1/2-B
	G 3/4-B
	G 1/2-B
Boiler water drain, mm	40				50
Condensate drain, mm	G 1-B
Traction gauge, mm	G 1/2-B

Boiler size	4200	5000	6500	8000	10000	12000	15000
Rated heat output, kW	4200	5000	6500	8000	10000	12000	15000
Efficiency not less than, %	92
Max. outlet water temperature, deg	115
Min. inlet water temperature, deg	60		70
Max. overpressure water, MPa	0,6
Flue gas temperature, max, deg.	190
hydr. resistance, kPa	6,4	3,7	2,4	3,7	7,8	3,3	4,1
Aerodynamics. resistance, kPa	0,84	1,2	11	12	14,4	14	17
Boiler water volume, m3	5,4	6,4	7,7	9,6	12,1	15,5	20
Nominal water consumption, m3/h	240	287	386	475	594	713	891
Weight of dry boiler, no more than, kg	9400	10440	14000	16000	20000	24000	32000
Flue gas outlet, mm	650	650	800	800	900	1000	1100
Water inlet/outlet, mm	200	250	250	300	300	350	400
Safety valve, mm	80	80	100	100	125	125	125
Inlet water temperature sensor, mm	G 1/2-B
Outlet water temperature sensor, mm	G 3/4-B
Flue gas temperature sensor, mm	G 1/2-B
Boiler water drain, mm	50
Condensate drain, mm	G 1-B
Traction gauge, mm	G 1/2-B

Documentation:

Gas boilers of the Thermotechnik TT100 series are manufactured Russian company Entroros is one of the leaders in the domestic market of water heating equipment. The units of this line are three-way gas-pipe steel systems, equipped with a built-in firebox and turbocharger. Let's look at what are the main reasons for the popularity of this technique on the territory and outside of Russia.

Model Termotekhnik TT100 - highly reliable boilers of increased productivity, designed to provide large objects of cogeneration hot water. The maximum temperature of the coolant in the system is at the level of 140 degrees Celsius. In this case, the maximum pressure in the boiler reaches 0.85 MPa.

Thermotechnician TT100 boilers are intended for operation exclusively in closed-type heating systems. The line includes several types of units that differ from each other in terms of rated power (it ranges from 1-15 MW). They are used in heating, hot water and ventilation systems. And they can be used on objects of various purposes, which indicates their versatility.

Design features

Thermotechnician TT100 is a horizontal type device with a cylindrical shape, which makes it a special and unusual engineering solution. The furnace is a special flame tube. In this model, convective heating surfaces are formed by fire tubes, which are located asymmetrically relative to the furnace.

The thermotechnician TT100 boasts improved heat transfer properties due to the 2- and 3-row pipe layout. The first rotary chamber, provided for by the design of this boiler, is washed by the coolant as much as possible. The second chamber is formed by the front tube plate and the lining niche of the front door of the unit. The convenience of the design lies in the fact that this door swings open in both directions. It makes it easier service maintenance water heating equipment, since it provides easy access to the furnace and pipes.

Experts point out that cleaning the Thermotechnician TT100 models is extremely easy, as well as inspecting key components. A special hatch is provided in the collection chamber of the boiler, which allows cleaning the exhaust gas collector. In the upper part of the unit there are inlet and outlet pipes with special fittings for temperature sensors. The emergency line is also located here. Systems of the Thermotechnik TT100 range, whose rated power exceeds 2 MW, are equipped with two such nozzles.

Inside the boiler, the coolant is distributed as evenly as possible. This became possible thanks to special water-guiding elements provided under the coolant inlet pipe.

A significant volume of the boiler and the space between the pipes make it possible to choose the heat output mode in a fairly wide range. If during the operation of the equipment it becomes necessary to remove the coolant, the drainage pipeline, which is located at the bottom of the unit, will help the user in this.

A special plate is provided on the front door of the boiler, which allows you to install the burner. The operator has the ability to control combustion in the furnace with the help of a viewing eye specially provided for this purpose. The design of the Thermotechnician TT100 includes a branch pipe for removing exhaust gases. At the bottom of the rear wall of the boiler there is a special drain fitting designed to drain condensate from the system.

The thermotechnician boiler TT100 is distinguished by its worthy thermal insulation properties, which were achieved by using special mats made of mineral wool. Their thickness is 10 cm, which provides excellent insulating properties. Corrugated aluminum covering the boiler from the outside also helps to maintain the temperature of the coolant inside the system.

An important design element of the Thermotechnician TT100 boiler is the presence of special lifting loops. They significantly facilitate the transportation, loading and installation of equipment, as they are located symmetrically to the center of mass of the unit.

Technical specifications

Since the Thermotechnician TT100 boiler is available in different power variations, it makes sense to consider the parameters of the most and least powerful in order to have an idea of technical features the entire line hot water equipment from Entroros.

The main technical characteristics of the unit with a capacity of 1 MW:

• The actual coolant consumption is 60 cubic meters per hour;
• Hydraulic resistance of the water path - 3.14 kPa;
• Aerodynamic resistance of the gas path - 0.52 kPa;
• Volume - 1.76 cubic meters;
• Weight - 3280 kg.

The main technical characteristics of the unit with a capacity of 15 MW:

• The actual coolant consumption is 908 cubic meters per hour;
• Hydraulic resistance of the water path - 6.12 kPa;
• Aerodynamic resistance of the gas path - 1.9 kPa;
• Volume - 20.00 cubic meters;
• Weight - 30212 kg.

conclusions

Thermotechnician TT100 is a line of universal water heating boilers, which are distinguished by a specific design and outstanding technical characteristics. The units are mainly used for heating large industrial and administrative buildings. It is in this area that they are most widely used.

Coppers Termotekhnik TT100 are very reliable and easy-to-work. Their low price and excellent performance have become the basis of their success in the CIS market. Therefore, to everyone who is looking for a worthy engineering solution for heating large objects, you should pay attention to this technique.

This entry was posted on 10/06/2015 by .

Request a Quote

Description

Boilers THERMOTECHNIK TT 100 are mass-produced in the range of rated power from 1000 kW to 5000 kW. THERMOTEHNIK TT 100 - three-way steel low-temperature water-heating boilers of gas-tube-smoke type, equipped with a furnace operating under pressurization. The boilers are designed for the production of heating hot water with a maximum temperature of 115°C at an allowable working pressure of 0.6 MPa. Boilers are used for operation only in closed heat supply systems. The preferred areas of application for the TERMOTECHNIK TT 100 boilers are large heating and ventilation systems, hot water supply systems for industrial, administrative, municipal and other facilities, providing thermal energy for production equipment. The boilers are certified according to the GOST RF system and are approved for use by Rostekhnadzor of the Russian Federation.

Peculiarities

The TT 100 boiler is designed as a gas-tube flue type boiler. The combustion chamber and the boiler body have cylindrical shape. The convective heating surfaces are formed by second and third pass smoke tubes arranged symmetrically around the combustion chamber. Two-, three-row layout of second-pass smoke tubes increases the area and intensity of heat transfer. The first rotary chamber, completely washed by water, is formed by a rear tube plate and a toruspherical bottom. The second rotary chamber is formed by the front tube plate and a specially formed lining of the front door of the boiler. The front cover can be completely folded down, or opened with the burner installed on it, as desired, to the right or left. With the front cover open, easy access to the combustion chamber and smoke tubes is provided when maintenance and boiler cleaning. Inspection and cleaning of the first rotary chamber can be done through the combustion chamber. An inspection hatch is provided in the upper part of the boiler body to inspect the fire tubes from the side of the water area. The flue gas collector is cleaned through a hatch in the flue gas collection chamber of the boiler. Water inlet and outlet pipes, as well as an emergency line pipe are located on top of the boiler. Boilers TT-100 with a capacity of 2000 kW and more have two emergency line pipes. Fittings for temperature sensors are welded into the water inlet and outlet pipes. A water guide element is mounted under the water inlet pipe for smooth mixing of cold return water with a warm boiler. There is a burner plate for mounting the burner on the front cover. Visual control of the flame in the combustion chamber is carried out through the viewing eye. The flue gas outlet is located in the upper part of the rear wall of the boiler. To evenly distribute the weight load, the boiler has a frame base made of a channel. The continuous enclosing thermal insulation of the boiler consists of mineral wool mats 100 mm thick. Outside, the boiler body is sheathed protective cover from aluminum sheet. For transportation of the boiler, butts are provided, welded to the upper part of the body symmetrically with respect to the center of mass of the boiler.

Specifications

Indicators	TT-100	TT-100	TT-100	TT-100	TT-100	TT-100	TT-100	TT-100	TT-100
Thermal power, kW	1000	1500	2000	2500	3000	3500	4200	5000	7500
Water pressure, MPa	0,6	0,6	0,6	0,6	0,6	0,6	0,6	0,6	0,6
Outlet water temperature, °С	Up to 115	Up to 115	Up to 115	Up to 115	Up to 115	Up to 115	Up to 115	Up to 115	Up to 115
Estimated fuel	gas/diesel/fuel oil	gas/diesel/fuel oil	gas/diesel/fuel oil	gas/diesel/fuel oil	gas/diesel/fuel oil	gas/diesel/fuel oil	gas/diesel/fuel oil	gas/diesel/fuel oil	gas/diesel/fuel oil
Efficiency,%	From 92	From 92	From 92	From 92	From 92	From 92	From 92	From 92	From 92
Dimensions (LxBxH), m	2.89x1.54 x 1.77	3.0 x 1.54 x 1.77	3.5 x 1.74 x 2.07	3.75x1.74x2.07	4.1x1.94x2.23	4.56x1.94x2.23	4.96x2.1x2.4	5.13x2.2x2.48	projected
Boiler weight, kg	2790	2950	5240	5500	6900	7900	9900	12000	projected