Linner is an English word and translated "Relief Flax". This material is used to cover the wall surface and is made on the basis of paper or tissue. In the process of production on the surface of the wallpaper, a plastic substance is applied, which has a natural origin. Basically, it is a gel of flax oil or alkyd resin. It is noteworthy that the linker can later be painted in the desired color and, thus, change the overall environment in the room.
In the process of the production of linker wallpaper, wood base is recycling in fine dulk. It is sifted several times through a special sieve, after which a homogeneous mass is obtained. It mixes with certain natural components as chalk, rosin, linseed oil and wax. The resulting plastic material is applied to any relief and after cooling the plastic is glued to a paper or tissue basis.
The wall decoration with a linker allows you to get incredible combinations of noble and beautiful coating. Since the basis itself is designed more for classic interiors, linker room, finds Rich and luxurious view. Thanks deep chipsThe interior is filled with majestic beauty. Recall that the linker was invented two more centuries ago in the UK. Then they covered the walls of luxury palaces, finished estates and castles. With the development of production technology, the linker began to be manufactured on a more dense basis and received higher qualities. But in any case, the natural base of the product, as always, remained priority in production.
The release of the linker is made in rolls. Due to high plasticity and strength, the material does not mind and retains its relief. The last parameter allows the use of coatings from a linker on the walls that need surface finish and have an uneven basis. The linker effectively hides small tuberculos and cracks, visually aligning the wall.
Material, in addition to the above advantages, has high sound absorbing propertiescan withstand sharp temperature differences. The high degree of environmental friendliness of the linker makes it indispensable in those rooms where people are often located with allergic diseases. We also note sufficient moisture-resistant properties of the line: the special composition on the surface does not absorb moisture, but at the same time allows the walls to "breathe" and does not delay dust on itself.
The decoration of the walls of the linker does not represent large difficulties. Stages are almost no different from the finishing of ordinary wallpaper. As always, first it is necessary to prepare the surface to a certain extent. Preparation includes Alignment of walls, their primer and twist. If there are fat or other spots on the walls, it is better to remove them in advance. In the presence of porous surfaces for primer used special primer compounds. After surface preparation, it is necessary to move to the preparation of glue, the best is PVA or SEM-MURALE.
The second stage involves the preparation of wallpapers for sticking. In order to cut the material at the required length, you need to choose a smooth and solid surface. Remember that the length of the canvas should be 3-5 cm to be greater than the length of the wall itself, that is with a stock. Use the square to cut smooth edges. Wallpaper Linker glue "Job"And this means that you must own this technology finishing wall. Rather, there is a snarling, and not possession of special skills. That side of the wallpaper, which is superimposed on the following canvas, is usually marked by a sequence number.
After you cut the canvas, they need them facial side down Put on a solid surface and moisturize with a sponge. Wait until the wallpaper absorb the required amount of moisture. The process takes almost half an hour. Under the influence of moisture, the linker wallpaper increases by almost 1-2 cm. Only after that you can apply glue. After sticking, the wallpaper should dry after 24 hours.
If after sticking you need to change the color of the wallpaper, you can buy any paint for this, but experts advise to paint this material Acrylic enamel or oil paints. We advise you to initially choose the color of the wallpaper, which is necessary for the next organization of the future interior. Make yourself about painting only when the wallpaper has already become familiar to you, and you want to somehow refresh the interior.
Silvene or golden shades of pasta from wax are usually applied to convex embossed facets. Wasten the wax is needed by hand and very carefully. Paint should be dried several hours. It is noteworthy that this coating allows wet cleaning using non-abrasive substances.
Are you looking for material for wall decoration and need something special: original, reliable, unusual, attractive look? Pay attention to the finishing material with the beautiful name of the linker. He fully deserves to devote a separate article to him.
If you think this is another newcomer, then you are forced to disappoint you. Linker keeps its history for more than 150 years. The material came up with the British, to whom we must, by the way, and the invention of linoleum. What is a linker?
At the beginning of its history, the material made a real extension. He was very loved by decorators. After all, the linker was a cheap and lightweight stucco substitute, which was in a big fashion. Gradually, with the invention of new finishing materialsThe interest decreased. With the advent of phlizelin, vinyl and other types of wallpapers, they began to master the minds of contemporaries. But everything returns to the circles. For several years now the popularity of the linker is on the rise. And now this material is actively used by modern designers, it can be bought not only in construction stores, but also in specialized finishing salons, as well as in online stores. What attracts the linker of our sophisticated contemporaries?
When it comes to finishing materials, they are evaluated from two positions. The first is practicality and functional advantages, Second - aesthetics and design. What are the features Linker and what advantages to promise our home this material?
We are not limited to one practical considerations when choosing finishing materials. Attractive appearance, original design, beauty and compliance with the style of the room - that's what we expect from decorative finish.
Linker requires special attention to applying. Violation of the technological cycle or non-compliance with its part will lead to sad results. Therefore, most buyers linner prefer to hire specialists who will provide proper quality of performance. If you decide to do everything with your own hands, then practical recommendations By plain walls linker Will you can not, by the way.
This is so relatively easy, you can provide your home or apartment not just beautiful, but, literally, a luxurious finish that your children and grandchildren can admire. After all, the linker lives for a long time, as it should be real family values.
Linker - thick wallpapers made by hand from wood flour, linseed oil and wax. If you decide to add a little glamor to your apartment or want to surprise your friends and relatives, the wallpaper of a linker is what you need!
The installation of the linker is quite simple and practically does not differ from the sticking of ordinary wallpaper. The difference is that the linker needs special glue, and the canvas before work should be moistened with warm water.
It should be remembered that the linker is quite heavy material, so it is not better to work alone.
Staining a linker should start a day after installation. Consider the technology of staining of linker wallpaper.
The technology is reminding the design of wallpaper under painting. We will need a velor or mohair roller with a mid-size pile. The paint is applied from top to bottom evenly, all uneven relief are carefully filled. In order to get a color saturation, you should apply another layer of paint after 3-4 hours. This technology is simple, does not require much time and special talents in the visual arts. But keep in mind, the frequency staining will not reveal all the beauty and elegance of elite wallpaper, but rather the opposite.
With the help of a patina, you can create the effect of old-fashioned wallpaper, which will look very luxurious. First we apply the basic color. We take alkyd enamel and a thick layer on the canvas, painting all the texture elements. We wait until the first layer is driving, and proceed to the second stage of staining.
Patina, which we want to decorated wallpaper, mixes with enamel in the tray in the proportion of one to one. It does not need to be achieved homogeneous mass. The thick brush is applied on the wall with horizontal light lines. The paint will only settle on the protrusion of a line. As a result, a decorative beautiful coating is obtained, which combines several colors.
Now go to those two ways that I tried for your bedroom.
Native color of linker wallpaper - ivory. As a linker wallpaper looks to painting, after installation, it can be seen in the photo at the beginning of the article.
So, the third coloring technology.
I did it acrylic paint. The choice fell on it, because It is not immediately seized, but for this method it is important. Figure on my linker in the form of large colors, so I tried on a flower, because It has more textured elements. We take a small roller with a pile of medium size and put the paint with confident movements on the flower, trying to score all embossed recesses. Get a fully painted flower. We are waiting for 5-7 minutes so that acrylic paint grab slightly.
Now we take the usual sponge, wash it with water, press so that it does not drink from it, and begin to wipe the paint from the flower surface. With this weigh we clarify the surface, and the depth remains darker.
The effect of the shadow and our flower appears, as if blossomed on the wall.
This technology is amazingly beautiful, but I could not use it for staining of the entire canvas, because My room is bright and so bright accent It would not be appropriate.
I did not meet anything easier in creating a beauty! We take the usual sponge, so that it is a little wet. In the tray is acrylic paints Create needed color And slightly miss the sponge. Sponge with light movements rub paint into our linker.
It turns out that the paint remains on the textured elements of the wallpaper, slightly painting the background.
I still wanted to allocate flowers brighter, so I am more dark tint Once again, only in colors.
I really liked the result - this is exactly what I wanted.
The texture has allocated, and it turned out not too dark cloth.
The main advantage of the linker is multiple staining and durable use. Suppose in a couple of years, I want to change something in the interior, and then I can simply repaint the line to another color on any technology!
Wallpaper "Linker" is rolled material With a smooth, but more often a relief surface. It was invented in 1877 by Frederick Walton.
Wallpaper Linker
Represents paper base With plastic mass applied to it. Thanks to its plasticity and retention of the attached form, as well as cheapness at one time it turned out stucco.
At the beginning of the XX century. The linker was produced from a mixture of resin, oils, sawdust, wax and decorative elements. To this day, only single unscrupulous manufacturers have begun to apply plastic-based ingredients. As we see wallpaper for linker walls Consist only from natural ingredients, it was precisely that he led to its popularity at the end of the twentieth century. And only the appearance of washable wallpapers began to push off a linker from the pedestal.
Linker was finished almost all: public buildings, wagons, cabins of ships, even suite numbers in five star hotels. And thanks to their durability, they still please the eyes. It is because of their plasticity that the interior acquired the luxury of palaces in his hands Victorian style. IN modern apartments The linker is separated by partitions, built-in wardrobes and shelves, as well as used on the ceiling and walls as decor. One of the positive factors is the possibility of staining a line, so that the seams disappear and the wall looks monolith.
Before applying, the wall must be processed. Remove the previous layer of plaster and apply new. After drying, treat pimples to remove small irregularities. Wipe with a dry cloth and primed. The primer consists of the olifa and suark grated in the proportion of 2/1 and a little sequivalent for quick hardening. In this state, the wall is left for 2-3 days. The process is then repeated again. And only after that it comes sticking the wallpaper of a line. All these measures are connected with the fact that the canvas is very heavy and the perfectly smooth surface is necessary for the greatest clutch with the wall.
The linker is cut into the necessary pieces with a margin of 10-12 cm. (It has shrink properties), twisted into rolls and soaked in warm water for 5-10 minutes. Then rolls are removed, and moisture is removed from the surface. Rolled out by smooth surface Face to top and leave for drying 12-15 hours. These all operations are done in order to avoid boring and formation of slots in the joints after drying on glued cloths on the wall.
The glue is used by bustylate or perchlorvinyl. As a last resort, you can use the usual flour or starch glue with the addition of joinery glue. Application of glue and sticking Lincherst wallpaper Directly on the wall is made in the standard way. The first strip is glued, exactly from the extinted plumbing line. Subsequent glue online. The canvas stroke to remove wrinkles. Very carefully you need to follow exactly the seams on the joints, in order to avoid the appearance of the gaps. But even if in the future, small gaps will appear, they are easy to smell with putty, and cover the paint selected color 2-3 layers.
Wallpaper Linker After applying on the wall, leave for drying to 9-10 days, and only then you can easily cover the oil or enamel paint.