So that you can correctly determine the size of the shoes for the child, we recommend that you put it with a leg on a paper sheet, then cut it with a handle or pencil and measure its contour by means of a roulette or ruler. If the value you received will be between some tabular values, it is necessary to make rounding towards more of them. For example, in the lower figure we received the amount between 12 and 12.5 centimeters, in other words, between 19.5 and 20. In this case, you need to choose the largest - 20. We draw your attention that in no case cannot be purchased for increased, since the supinator will not be in the right place, as a result of which it will lose their orthopedic properties.
Table matching the size of children's shoes Ortopedia
| Foot dimension in cm. | European Size | Foot dimension in cm. | European Size |
| 10 | 16 | 17 | 27 |
| 10,5 | 17 | 17,5 | 28 |
| 11 | 18 | 18,5 | 29 |
| 11,5 | 19 | 19 | 30 |
| 12,5 | 20 | 19,5 | 31 |
| 13 | 21 | 20,5 | 32 |
| 13,5 | 22 | 21 | 33 |
| 14,5 | 23 | 21,5 | 34 |
| 15 | 24 | 22,5 | 35 |
| 15,5 | 25 | 23 | 36 |
| 16,5 | 26 | 23,5 | 37 |
In your online store for children with a foot length of 14.5 cm. 23 size is recommended. But the insole with it in winter boots is 15.5 cm. Do I understand that a child can wear such while his foot will grow by 1 centimeter and becomes an equal insole? But should also be a stock under the fur for about one and a half centimeters? I would like to clarify that by incorrect installation of the foot, we remove the supinator, therefore you can wear shoes with a margin. It is necessary to choose the correct size with the reserve at least one season.
The difference between sizes is some difference between recommended limit values \u200b\u200bfor them. In case the foot grows with the insole to the same size, then when walking, when the stop increases its length due to the lowering of the arch, it will not be enough to increase. That is, it turns out that the shoes simply will be small. This is extremely inconvenient, and the likely probability that some orthopedic problems may appear or aggravate. Therefore, the length of the insoles should be greater than the length of the foot, 5-7 millimeters. A half centimeter under the fur is not a stock, but the place that he himself occupies, in addition to this, already described earlier than 5-7 millimeters to increase when walking the length of the foot. That is, if size is 23, then its insole length will be about 15 cm. It will rest in the walls of the shoe, as there is no fur under it. And above it - the fur, "taking" the insoles are the most and a half centimeters. Therefore, if your child has a foot equal to 14.5 cm, then the sandals necessary for it should have 23, and the winter boots minimum should have 24 dimensions. Having got rid of the supinator, you do not increase by the length of the product (that is, insoles), but only its "lifting." At the same time the size remains the same. Therefore, purchasing shoes "with a margin", you get a product with a large size than the right thing now. Such shoes are also uncomfortable and in the process of walking can rub baby legs. Leg growth occurs extremely unevenly, and guess which size will become in six months - almost impossible. The best way - This is of course fitting shoes, as sellers are almost everywhere are also consultants.
Under "stock" mean one winter - 3- 4 months. If 24 is the minimum size, then what will be the maximum in my case, please tell me?
It is impossible to predict with full confidence how much the children's foot will grow during the winter season, but it is known that it usually grows faster for the summer. But still, we believe that it is unlikely to grow more than one size. Therefore, if by the beginning of the period 24 the size of the child is not "in principle", then it is likely to be needed. And if still shoes does not hurt, but about now ... then more - 25. But here it is still possible to guess it in advance and it remains only to measure.
If you need to consult with a specialist, you can call us by numbers specified in the contact data, as well as come to our store (address is also specified in contacts). Our experts will be happy to answer all your questions and help you make a really high-quality choice available for each prices!
Different manufacturers may have its own dimensional grid for both adult and for children's shoes. For example, this manufacturer was its own, a special dimensional grid, its feature is that some models of shoes have dual sizes, i.e. Such shoes are suitable for the legs of 2 sizes.
In these models there are liners from the fleece, which, if necessary, is removed. It has a lot of length and completeness. Such shoes are not designed for one season, besides, it will be comfortable to walk in it.
To do this, it is necessary to determine the length of its stop. It is necessary to put the baby with a barefoot on clean paper and put a foot on the office, the pencil must be kept strictly vertically relative to the floor.
When the drawing is obtained, you need to take a ruler and measure the distance from the heel to the tip of the thumb. You also need to circle and the second leg, and make measurements. If the length of the stop is different, then there is nothing terrible in it, choose more importance. Then, according to the data received, you need to determine the size of the grid proposed by the manufacturer. Do not take winter shoes with a big margin, but so that it can be put on warm socks add 1-1,5cm. Having done everything right, you can be sure that you can pick up shoes for a child and without fitting so that it turns out to be fit to him.
| The size | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| cm. | 12 | 13 | 13,5 | 14 | 14,5 | 15,5 | 16 | 17 | 17,5 | 18 | 18,5 | 19,5 | 20 | 20,5 | 21,5 | 22 |
| 34 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | ||
| 22,5 | 24 | 24,5 | 25,5 | 26 | 26,5 | 27,5 | 28 | 28,5 | 29 | 29,5 | 30 | 30,5 |
| 36 | 37 | 37,5 | 38 | 39 | 40 | ||||||||
When buying, it is necessary to evaluate not only the degree of comfort of the model, choose the necessary rigidity and type of filler, but also the right dimensions orthopedic mattresses. What parameters are presented on the market? How to choose a mattress size for a new and old bed? And how to find the perfect mattress for a child? We have prepared for you the most complete answers to these and other questions.
One of the most common mistakes becomes an attempt to acquire a mattress from european manufacturer To bed, issued according to the United States standards. The fact is that in Europe and America adopted different types Markings: Santimeters and inches. If you recalculate the size of the "royal" mattress 80 by 78 inches, we will get a little more than 203 and 198 in centimeters in centimeters. Such a model will not suit the type European Beds of Premium 2 m.
The ideal option will be purchasing a bed with a mattress. True, this is not always possible, because you can arrange the quality and design of the furniture, and at the same time you will not like the characteristics and comfort of the bedroom. In this case it is recommended to choose products from one manufacturer.
The most fastidious buyers can order a mattress at the factory for individual standards.
The market presents a huge size range of standard mattresses.
With a length of 190, 195 or 200 cm, their width is:
Determine comfortable size will help simple experience. You need to lie down on the mattress, while its length should exceed 15-20 cm your height, and in width you should freely pass with your hands bent into elbows.
For newborns and older kids, the mattresses are manufactured in strict standards. First of all we are talking about ecology used materials and high orthopedic effect. Standard size Children's mattress in a bed for a newborn - 60 by 120 cm. These parameters may increase if it is necessary to choose a mattress for a more adult child. Maximum width - 80 cm, length - 160 cm.
Non-standard are called models made to order, as well as those that have an indirectacular shape. Round products have their own dimension range:
Most manufacturers willingly fulfill special orders, manufacturing mattresses in accurately compliant with the specified customer parameters, as well as the release oval or curly models. This option It will cost 5-10% more expensive, but you can choose the type of filler and the amount of its layers, the uphony materials, as well as the type of design (with or without springs).
There are also rectangular mattresses with non-standard sizes, such as orthopedic Paster mattresses, but about them in another review.
Another parameter that should be taken into account - the thickness. The height of a flawless children's mattress can range from 6 to 13 cm, the mattress with a spring block - up to 18 cm and more. Only a certain thickness mattresses are suitable for some kindergartens, and attention should be paid to, having studied the information in the furniture passport.
Depending on the type of filler and design, adult mattresses can have a thickness of 5 to 50 cm. The height of flawless models for adults is from 15 to 24 m, spring - from 18 to 32 cm.
For a middleweight person the model will be comfortable 16-18 cm high. Many specialists, however, assure that the higher the mattress, the more convenientness.
The thick mattress is most likely it will be more convenient, because it increased the number of filler interlayers, which means that anatomical and orthopedic effects are improved.
Mattresses below 15 cm are suitable only as a base for a temporary bed or as an addition to the main sofa mattress or bed.
Well, if the passport is preserved on the bed. From it you can quickly find out the exact size of the bed. But what should I do if the documents on the furniture are lost?
Identify the necessary parameters, removing the measurements from the old mattress - not the best decision. During the operation, he could track so much that it was significantly deformed and changed in size. If you do not have a passport to the bed, where the size of the bedroom is indicated, they can be performed independently. To do this, the roulette will be required, to postpone by the inner perimeter.
Try to choose a mattress that will accurately match the bedroom dimensions. If it is more centimeter for 2-3 - it is not critical, because it will be possible to put it on the base anyway. That's just due to friction, the service life of the mattress and the product itself will be significantly reduced.
The dimensions and prices of orthopedic mattresses are directly dependent: the size is greater, the more expensive the mattress is. The cost of the product, however, significantly affects the type of construction and the materials used, therefore not only a well-selected size will be the key to buy a comfortable mattress.
