Affairs are very beautiful lamps from the pipe
Volumetric luminaires made by their own hands are affected by our imagination of the magic game of light and shadow. But no less awesome is that these strikingly beautiful lamps are made from an unexpected, simple and very affordable all at the price of the material.
The use of PVC pipes, as the base for the lamp, gives broad and unusual possibilities for making. You can cut through the pipe through, can take a half, just removing the thickness of the pipe, you can make bulk compositions, carefully bending parts of the pipe. 
As the author of these lamps, Ademar Rocha tells, for the manufacture of the lamp, you need a hand drill with a set of different nozzles, and a construction hairdryer, which allows you to make the desired curved shape with the cut parts of the pipe.
Drills nozzles allow you to process the edges of the bulk parts of the lamp, make the texture and surface cuts on the pipe that will create the necessary halftone in the planned light composition. All this will give the lamp a neat finished look. 
Of course, our lamp is needed a rather heavy stand, which will give the stability of the vertical design.
For fire safety, it is better to use an energy-saving light bulb that heats up the minimum. 
As a lamp in such a lamp, you can also use LEDs. These are not only safer, but also gives more opportunities for color backlight.
Because LEDs allow you to change the color of illumination, then your lamp can please you with green, then red and golden color. In addition, the LEDs are practically not heated. 
Such a lamp, carefully made by their own hands from the ordinary pipe, will be an unexpected gift for Valentine's Day. And such a musical lamp will rate the music fan. A similar lamp can be made of overlays of two pipes of different diameters. 
The surface of the lamp can be painted, and then in the off state it will be better fit into the interior of your room.
For the lamp, you can use pipes of different diameters. For example, this ceiling for a chandelier is made by a point slot from a wide PVC pipe. 
Not only volumetric luminaires are beautiful, drawing the desired drawing on the pipe, and making a point on its contour on the pipe, you will get an easy-to-execution, but a wonderful beautiful lamp. Use not only through, but also translucent holes, so your lamp will be more interesting.
If you think to drastically change the appearance of your room or want to add home interior Loft loft, try to make a luster in the style of loft from the pipes with your own hands! Master classes with photos will help you with this.
By the way, Loft settled in the interiors relatively recently - approximately 60 years ago, and to this day is interesting to a variety of design concepts. It is appropriate as in large studios, where the living room is combined with dining room and in small-sized rooms. Loft lamps do it yourself - this is a compromise between fashion and style, extravagant and everyday life.
The usual items appear before us in the new light - this is the lamp of Loft with their own hands. The feature is long chains for hanging to the ceiling, non-standard lampshades or compositions from a variety of simple lamps and use.
Make a loft lamp from pipes is quite simple, read 4 master class - see for yourself!
Step 1
Step 2.
It turned out a urban chandelier, which the light of large lamps combines the simplicity and election of an industrial or elevator of the style.
Follow modern trends Lighting, it is necessary to take into account the economy of not only energy-saving lamps, but also the chandeliers themselves. For example, from healthy materials - try to make a simple, bright, ergonomic luminaire in Loft style from polymer water pipesAfter reading the next master class.
Step 1.
Step 2.
If necessary, after drying, you can cross the second layer. The ceiling outlet is missing from the front side.
Step 3.
After everything dried, you can attach the chandelier to the ceiling. If it suits you, throw light bulbs And enjoy your creation!
Over time, maybe you want to change it - then you can make another combination of branches and the chandelier will shine in a new way!
Reliable, easy to manufacture desktop paw in an industrial style is suitable for working in the office or at home. It is almost through the pipeline "sheds" cold or warm white light, in which it is pleasant to work or engage in your hobby. 
Step 1.
Step 2.
Step 4.
Prepare a hole for the cord on the other side. For this, the electric drill is drilled in one of the tees.
First, imagine how the lamp will stand on the table, only then mark the drilling point and drill the item.
Step 5.
Step 6.
We disassemble the switch that was cut. I pull out the former wires and with the help of the isol we make a new twist, connect the ends of the wire to the appropriate channels in the switch. Collect the switch again.
Step 7.
Check how the switch works and whether the type and stability of the lamp arranges you. If something is wrong, in such practical design It is easy to fix with the turn of the parts.
Sustainable, comfortable and completely unexpected design lamp can feel free to refer to an indispensable companion of your evenings!
You can also still make a very stylish desktop lamp of copper pipes or empty bottles, master class of these 2 lamps - in the material
If you like products with a production design, if at home or in the garage you want to install industrial lamps - look at the next master class and, most likely, you will see what has been looking for a long time. Simplicity of manufacture and urban design.
Step 1.
Step 2.
Consistently connect the details of the chandeliers: flange, to it - a tee, then nipple, corner, again nipple, connected to the Second Flange, all the time pulling the wire through the tubes.
Step 4.
Check the length of the cord from the outlet to the height on which the chandelier will be installed. While you will not arrange the height of the switch - do not join the lamp to the cartridge.
Variate the cable length until you find optimum length. After that, you can make a twist.
Step 5.
Fix the flange on the wall with the help of screws and the screwdriver, because The design is not very heavy. It turns out, the wire hangs just from the hole of the tee.
Turn on the outlet and enjoy a small designer element in the style of a large city!
Loft style chandeliers focus on the technique of solutions, clarity of forms, without excessive solemnity, pompousness. It is a big city style, spacious household premiseswhere there is no luxury, but there must be a lot of light and work, creativity.
Loft style chandeliers deny the parade and chic with their own hands, but they fit well into households and other interiors due to the continuity of modern currents and, of course, lept everyone who manufactures it.
Also a very simple loft lamp, as the photo above can be made of wood - master class in the article.
The process of processing is very relevant in the Loft style. For this, different banks and bottles will be suitable. We also have ready ideas and master classes.
Glass and wood are favorite and frequently used materials in the loft. Therefore, the lamp created from them will always look harmonious and stylish. Make this religious thing as in the photo above - (no estimate)
Creative ideas often occur unexpectedly and, it seems to be empty. But their material implementation gives such dividends that the costs of their embodiment in reality seem to be meager. Today we will try to make a decorative lamp at first glance at first glance, which will not leave anyone indifferent.
Already repeatedly stated the fact that very unusual and spectacular products for interior design are obtained from materials, it would seem not intended for this. Many decorative things are obtained from disposable dishes, plastic containers, all sorts of cases, covers and traffic jams. And from plastic bottles Construct almost anything, from boats and rafts, to sofas and chairs, from baskets, organizers and VAZ, to earrings, bracelets and rings. PVC pipes are also successful, the purpose of which is to cope with the sewage needs.
.jpg)
And so, it would seem, of such prosaic, albeit practical ordinary, plastic pipes go to a completely different level of being: skillful hands and fantasy turn them into unusual, almost the fabulous lamps-night lights.
It is difficult to say who first thought to this idea, but today the manufacture of PVC lamps are engaged in craftsmen from Brazil, Argentina, Australia, China, and fans of this curious designer reception also appeared in our country. The manufacturing process is pretty simple, a teenager can cope with elementary models that can handle the power tools. The lamp is performed by applying through holes through which the light will penetrate.
To perform from PVC pipe, the lamp will need a drill with various nozzles: drills of different thickness and grinding nozzles with abrasive. The pipe itself is selected rather wide diameter, from 20 to 50 cm, you need to focus on how the place in the interior will take the lamp and which drawing to apply will be selected.
The simplest models of lamps can be made using the same type of perforation drill, complex, volumetric models include not only the drawing from the holes of different diameters, but also work with a thickness of the pipe, removal of plastic layers, as well as cutting and giving the volume to some parts of the composition.
Before starting work, we determine what size our lamp should be. The dimensions determine the diameter of the pipe and its height. Then select the template of the desired picture. It may be a simple ornament, a peevery type composition or a floral motif, or a plot or thematic picture.
Contours drawing are transferred to the surface of PVC pipe in a convenient wayIncluding attention is paid to the upper and lower edge. Getting Started Consider the necessary diameter of the holes when you use various drills. Even simply applying the holes of different values \u200b\u200balong the contour of the drawing, you can already get a finished lamp.
.jpg)
A more elegant drawing is obtained if you apply the light halftone. This effect is achieved by removing the layers of polychlorophilus from the surface of the pipe. To do this, use abrasive nozzles on the drill. The more layers are removed, the more the light is visible.
If a 3D effect is required, the contours of those parts that should be beyond the pipe framework, first thinning with the same abrasive-grinding nozzles, then cut off with a construction knife. To give a form, they are heated by a hairdryer, better construction, it gives a more intense and uniform heating, and bent into the direction. When cooling, this form remains.
PVC pipe lamp will look in the interior and in white, so to speak, pristine color. But if there is a desire to have color design, it is easier to do it easier, painted PVC paint from an aerosol can.
After the decorative part is completed, the time comes to take care of the practical side of the issue. For this lamp, you need a reliable heavy base, it will allow to become a stable lamp.
The source of light for the chlorvinyl lamp is chosen energy-saving lamps, they will not overheat the decorated shell. An even more interesting is the use of shifts, for example, light garlands. Then the color effects of the glow, making the lamp even more attractive.
Want to reduce or increase the voltage? Buy a transformer 220-110. Affordable price And the quality that you will serve not one year.
Read 6 min.
Various interior items made from the most unexpected things and even scrap metal are increasingly becoming decorated residential premises.
Luminaires made of water pipes such as plastic and metal, cast iron makes many craftsmen, turning a simple plumbing product in designer things, unusual in appearance.
Water pipe lampAlone to assemble the lamp from the remnants of the water pipes is very easy. It does not depend on the material of the manufacture. Thinking appearance And the purpose of a lighting device, the stylistics of the room in which it will be taken into account. The properties of plastic are taken into account to be heat treatment, metal plastic pipes Street, and cast-iron - fold through adapters and connectors to the most bizarre forms.
The main thing is that attracts the creators - cavity in which you can easily skip the electrical wire. The variety of cartridges will allow you to pick up most suitable size And just glue the material in the right place.
Water pipe lamp excellent suitable Loft or country style. A pattern, carved in a large diameter PVC pipe, highlighted from the inside, will decorate even the most exquisite interior.
Production of lamps from plastic pipes with their own hands - a very simple process. The material is easy to cut. It can be bent after heating. At the same time, it is not expensive, does not pass electricity and can serve as an additional insulator. But it should be remembered that plastic is subject to melting and deformation, so the lamps should choose those that do not heat.
If you use the pipes with a small diameter, connectors and tees, you can collect the design of any configuration, simply inventing the appropriate design and folding the components of the designer. For example, a very effectively looks at an outdoor high product, folded through tees, with curved upper lines. Such a lamp can be 4 legs or a wooden round basis. number installed lamps Depends solely on the desire of the creator.
Decorate the pure living room will be able to an outdoor lamp from a large diameter pipe, in which patterns are cut. Warming up its individual parts by a construction hairdryer, you can exhaust the material and make the drawing volume. Cutting some sections, you can make them more translucent. If desired, paint the surface in any color. It will only be to fix inside the light source, put everything on PVC or wooden base and connect electricity.
The compound of individual elements is strengthened with a glue layer, passing the maximum length cable in advance.
Production of decorative products from old cast-iron pipes Very claimed for use in the country. It can be stylish sconce with large beams or loft style chandelier, assembled in the form of bizarre bending lines with several lamps at the ends.
Appropriate homemade lamps And as street lighting, installed on wooden columns and facade of the structure. The main thing is to remember that any metal conducts electricity, so you should take care of the reliable insulation of the cable.
Homemade variants of pipe lamps are perfect for playgrounds. They can be collected in the form of a fence, inserting the lamps inside the sections with a large diameter. Such a design will reliably protect the light source from mechanical damage, and the hidden cables completely eliminate the possibility of injuries from electricity.
Securing the pipe around the perimeter of individual entertainment sites, drilled in it holes over the entire area and inserting inside the LED tape, you can turn the most banal pad into the fabulous world.
Metal-plastic pipes has 1 essential advantage over PVC products - they are bent. The light source with such a housing can be rotated in any direction, without surviving that the movement will lead to a breakdown.
For assembly, it will take a blank from a tree or thick plywood. It is made of the base that is attached to the wall. In addition, the pipe should be prepared desired size, suitable cartridge, cable, isolent.
First you need to draw the design of the future product on which it will be shown how to make the main components. To work, you will need drill, jigsaw, stationery knife and several screws.
From a piece of wood or thick plywood cut out the workpiece of any shape. In the place of the alleged attachment of the pipe drill the hole of the corresponding diameter.
For full functioning, a pipe is 5-50 cm (more than). It is inserted into the opening of the base. Then the electric cable traveled through the pipe. From an inverse movable side, it is necessary to fix the cartridge. If necessary, you can use additional plumbing fittings.
When a wall lamp from flexible metal plastic will be fully assembled, it is screwed to the wall with dowels or screws, the LED element is installed and put into operation.
If pig-iron products are more suitable for making lamps in the Loft style, the gentle white plastic is better to use to create nights, which will fit into any interior. They are decorated with openwork patterns of any stylistic orientation, ranging from exquisite floristics and ending with fabulous heroes.
Making plastic lampshade is very simple. To do this, you will need a wooden or metal base with an elevated cartridge, a PVC pipe segment with a diameter of at least 15 cm and a length of 20-30 cm, a drill with a set of drills, a stationery knife.
To begin the edge of the future, the lampshar grind and apply a drawing. Then the holes of different sizes drill on the outlined lines. The oblong lines are cut out with a knife. If you want to give the image a great realistic, you can cut some surface areas by making it thinner to increase the bandwidth. Change the shape and bends of some areas can be heated by the construction hairdryer and extinguishing.
After the pattern is worked out, the lamp shade is attached to the base and screw the light bulb. Now the whole design is collected and can be connected to electricity. If desired, the ceiling can be painted.
Many may seem that when using pipes and components, plumbing chandelier will look robust and even straight, but it is not. With the right approach and careful performance, the work of art is created even from such simple materials.
For the manufacture you will need pieces metal pipes, splitters, ceiling outlet, cartridges.
To begin with, we think about the design of the future product and the number of lamps that will be installed. In the center of the whole design there will be a splitter to which pipes connect and fuse them into the desired shape. Through the resulting workpiece skip the wires. Since the cord will pass through several endpoints, it is recommended to run parallel lines in each individual branch, connecting them only under the ceiling outlet, excluding the gaps inside the chandelier.
Cartridges are fixed to each pipe at the ends, connecting them to the cable in advance. Through a small piece, connect the socket to the splitter. Then the electricity is connected.
The finished product is painted and equipped with flames. The main thing is that the result pleased the inhabitants of the house.
