If you want to bring the color of the color of colors in line with the design of your interior or just add bright colors on the white window sill, you can paint the usual clay pots into warm and gentle colors.
4 clay flower pots
White matte №1007 (either ground No. 68 or №168)
Cream №33 (cream)
Green №27 (Leafgreen)
Blue No. 15 (River Blue)
Glossy varnish Bosny №190 - at will
Old wallpaper or newspapers
1. Before the colorful pots you need to wash, dry and if necessary to degrease. If they are new - it will be enough to wipe them with a damp cloth.
2. We put the first pot on pre-unsettled newspapers.
3. As a primer layer, we apply a matte white paint Bosny №1007. On this basis, the main colors will be juicy and brighter, besides, it will fill the pores and significantly reduce the consumption of the paint. If you want to paint the pots in more dark colorYou can also use soilbosnary №68 either red-brown №168.
4. After drying the primer layer (after about 10-15 minutes), we apply a thin layer of the paint of the primary color. Prayes the entire outer surface pot, as well as the top of the inner surface (about 2-3 cm from the edge).
5. After 1-2 minutes we apply the second layer. If necessary, apply more thin layers of paint until you get the degree of color saturation.
6. After drying in paint (approximately 10-15 minutes.) You can apply an aerosol glossy varnish. This will make the surface shiny and protect it from pollution. Thanks to the layer of paint and varnish, pots will easily be laundered and acquired a more neat look.
7. Repeat the same procedure with all other pots, alternately painting them into different colors.
On the side surface, the pot after applying paint (when it dries) you can use some drawing with a contrast color or inscription. And then reveal the entire surface with varnish.
1. It is necessary to paint at room temperature indoors with good ventilation.
2. Before working, the canchor must be good.
3. The paint is applied from a distance of 20-25 cm.
4. After work, the canopy must be turned upside down and press the sprayer button until pure air goes. After that, the splash can be put on the left paint until the next time - there will be no dried paint on the sprayer, which would score the sprayer valve and prevented reuse.
5. Although the Bosny paint dries very quickly (from dust in 10-15 minutes), use painted objects is recommended no earlier than a day when the complete drying of the coating occurs.
We have at home, do not always suit the interior of the room, and often there are simply unpleasant. Spring comes and we want to transform your home, bring order in all corners and come up with something new for comfort in your apartment. Why not start with flower Gorshkov, because they are always in sight, stand on the windowsill or somewhere next to the window. At the same time and transplant the plants tired for the long winter months in fresh land and updated pots. First you need to decide what we want to change appearance His flower pots. Maybe we are tired of their dull brown or gray? Then everything is simple: take acrylic paints, brush and change the color. Do not forget that before starting painting a pot, it should be well washed, dried and degreased (for this cotton swab, wipe the pot with a liquid to remove varnish or alcohol).
Must necessarily pay attention to what material is made flower pot. If it is plastic, then before the pot is painted, load the entire surface of the pot of PVA glue, let me dry, and then paint in needed color acrylic paint. In addition to acrylic paints, you can use paints from canopy.
When the paint is dry, if it does not work out a smooth and beautiful layer, paint the pot again and again give the paint to dry well. To secure the result of the pot, cover acrylic varnish. Only when the lacquer becomes dry, proceed to landing in a flower pot.
As you can see in the photo above, the pots do not just paint the paint of one tone, and draw pictures that can easily draw anyone who can at least keep a bruster in their hands. The advantage of the coloring of flower pots with their own hands is that you can come up with any drawing or pattern and try to embody it in life.
It is quite easy to decorate clay pots, especially those that are not covered with icing. The surface of the pot is porous, so before painting this pot also needs to be primed by PVA glue. When the glue dries, gently paint the pot into two layers. When the paint is dry, proceed to apply the pattern.
If you wish, you can decorate several flower pots in one topic and transform any room in the house with them. These are such pots can like the boys.
And girls can like the pots with flowers, butterflies (dragonfly) or birds.
If the child is already able to draw something, try to paint flower pots together together. Surely, with benefit and interesting to spend time.
Children will surely become pots with eyes and spouts. They can serve as containers for small toys.
For the kitchen, color the pot into flower, berries, chairs or polka dot.
For the bedroom and the living room, make a dream and depict anything suitable for the interior of the room.
When inspiration comes, drawings are fought quickly and immediately embodied.
Sometimes even the drawings on the pot seem to us a little, but I want to add something else that the flower kashpo or pot turn into something unusual. Then you need to look for a house, which can be glued to the pot so that he stand out from a number of his fellow. This can be anything: beads, sequins, buttons, plastic and felt flowers and other minor decorations. It is necessary to glue on super glue or glue from a pistol.
In the same way, you can transform your flower pot, completely covered with it with seashells. Such a pot will support well marine topics in the room.
Kashpo and pots, decorated with seashells, are able to decorate not only the room, but also a balcony, a terrace or a porch in a garden house.
If the pot turned well, you should not sit in it such a plant, which will be closed by your leaves with your leaves. Place it, for example, cacti, which grows slowly and do not hang down.
Ceramic or plastic pot can be saved with pebbles. You can use super-glue or glue from a special pistol to attaching the pebbles.
Simple plastic pots after decorating pebbles are transformed beyond recognition.
Have you ever tried to decorate pots to use texture plaster? And you try. Get an interesting result. Apply a texture (relief) plaster on a pot and use the calculation or a gear spatula to the wet plaster any pattern, which only come up with. IMPORTANT, DO NOT WINLING THE PROPERTY FIGURE, but gently dry the pot. In the future, the plaster does not appear and does not peel.
Another pointing way to decorate flower pots-sticking pieces of tree branches. Take the thin twigs of the tree (better not resinous rocks), garden plugs and blank wooden "rounds". Start the bottom to glue them to the pot on hot glue and continue until the whole area is filled. Alternate small and large "woods". When the glue dries, cover the pot acrylic varnish.
And if you do not want to cut the branches with nippers, just put on a pot of two stationery gum and carefully push the same sliced \u200b\u200btwigs for them around the entire pot. Then the twine bind the twigs among themselves.
Such pots can be decorated with thin branches, painted silver or gold paint and natural or artificial berries.
Many ways to decorate pots already invented. Perhaps you will come up with something your own. Here I also bring to your attention how to decorate the pots of lace. Cut the fragments of the lace and stick to the pot, which is primed by PVA glue. Next, the pot with lace needs to paint.
To decorate the pot of twine, you will need a replenishment of twine, PVA glue and tassel. Take the pot and wake the pva glider. Carefully start winding the twine around the pot. Further also to the top of the top pot: scroll the strip with glue and wind the twine. Then give the pot to dry. Twine can even paint in any color acrylic paint.
If you suddenly wanted the flower pots to repeat the coloring of the curtain or curtains, then you need to take the fabric from which the curtains are sewn and make the pattern for the pot. To do this, on a clean piece of paper "Rolling" a pot from one to the other edge of the sheet and draw two rounded lines: on the upper and lower edge of the pot. Measure the circumference of the pot on top and bottom, these sizes must match the lines you spend. Cut out the pattern and impose it on the fabric, fixing with needles. By the way, do not forget on the pattern, leave extra 1 centimeter from above and below to have the ability to overcome the fabric. The carved fabric is glued to the PVA glue to the pot, decorate at your discretion.
From unnecessary knitwear, seek such "suits" for their pots. Looks in spring fresh and beautiful.
Perhaps you will like the pot just woven in the burlap.
It looks great to pots in bags from the cargo, somehow immediately becomes homely cozy.
All that you read above makes sense to do with floral pots, if they are still whole, without cracks, and ceramic will not crumble and do not scatter. And if it makes no sense to transform the old pots, then take them to the cottage and make this funny "pot" company here.
Good luck to all!
What and how to make floral pots do it yourself, read
Pots and pallets can be easily found in business stores. To create projects offered in this book, the unhappy products are best suited: they are made of special clay and burned in furnaces, due to which the characteristic terracotta is acquired. Choose new, evenly colored pots with a homogeneous surface without defects. For painting ceramics suitable acrylic paints (matte, metallic, with sequins) or ordinary artistic in tubes (before use, they should be dissolved with water). Neither those nor others are waterproof, but because you are going to place a product on the street, be sure to cover it with varnish - acrylic (produced in the form of aerosols), on aquatic or polyurethane basis. Thus, you protect the surface from moisture and dirt. The pot covered with enamel for glass and ceramics and the burning cabin in the oven can be washed. Fireproof enamel some trademarks dried and without heat treatment.
The medium for the erosion of paints makes them more transparent, due to which dark and light tones are mixed, forming a divorce. The glaze medium creates the effect of a vitreous coating.
Finishing glue for decoupage is used for gluing paper applications and their coating with a protective layer. Such a means is not resistant to moisture and is not suitable for the pot you are going to put on the street.
Brushes for paints are flat, oval and round, wide and narrow. A brush of flots and a liner can also come in handy. Experienced artists recommend using high quality tools, clean and care for them, so that they will be served longer. When working with a stencil, use brushes with flat bristles that allow you to apply paint evenly. Spongeous brushes with a width of 25 mm are convenient for applying paint bases, glue, decoupage and crane (cracking effect). For painting pots are also comfortable sponge rollers. Brushes for varnish are characterized by a short bristle. Sponges are suitable for applying paint and creating a variety of textures. Pressed sponges can be given with scissors any form and use them as stamps.
Completing of the work
1. Wash the pot with water with vinegar to completely remove dirt and fat. If necessary, sweeten it with a brush. Let dry.
2. If you need to drill holes, use a carbide drill. Holes make painting
Since the pot can crack or crash.
3. Transfer the drawing on the product. To do this, redraw the selected template (from the book or at your discretion) on the tracing. If necessary, increase or reduce it with a xerox. Put the flooring with the image on the decorative surface, placing a copying layer under it with a copy paper. Circuit the drawing line with a ballpoint handle.
4. Color the pot on the planned pattern. After drying, apply varnish or other protective coating
Council
Planting plants directly in paint-painted pot should not. It is better that the flower is in a separate container. If you are going to put something wet into the decorated article, it is recommended to treat its inner part with varnish for external work; Otherwise, the fluid can leak through the pores of the ceramics and damage the drawing. Using such a product for serving a table or storage of products, protect the latter from contact with a painted surface; If the pot is painted inside, pre-place the products in glass containers or plastic bags.
1. Spread the bottoms pots and pallet. Let dry.
2. With a flat brush, cover the outer surface of the pot and both sides of the pallet with strokes in an arbitrary order using paints of all colors from the list, with the exception of golden and brown.
3. With a flat brush, paint the brown paint rim. Pot and pallet.
4. Draw brown lines that form arbitrary rectangles.
5. Brush Flots Welcome Golden paint and fidgeted separate yellow sections. Let dry.
6. Apply varnish on the painted surfaces.
7. Putting food products on the dish, remember that they should not touch the surface.
In the photo - a piece of cake is pre-placed on a plate.
Council
On this original dish in English is notched unusual recipe: All you need for happiness - faith, hope, love, family, friends, generosity and laughter, and some more sunlight. You can make an inscription from hand or with the help of stamps to transfer it to a pot, and then circle black paint
You will need:
Ceramic pot - 14 cm
Ceramic pallet - 25.5 cm
Acrylic paints - sea wave color, glossy blue, red, golden (metallic), brown, bright yellow, lemon yellow
Acrylic sealant
Brushes - flat, flutz, thin
Water tank
Paper towels
1. Carbide bewood drill a hole with a diameter of 5 mm in the center of each pallet. Watch dust.
2. Cover the pallet lid and the outer surface of the pot of white enamel from the aerosol. Let dry.
3. Draw a bright red enamel strip 5 cm wide at the bottom of the pots; On the rims of each of them, draw one wavy line. Make inscriptions, as in the photo, or at your discretion.
4. Cut from the sponge two mugs with a diameter of 10 and 13 mm and glue to non-sharpened ends of the pencils. With their help, as well as through the opposite ends of the brushes, apply onto the lid and under the bezel of each pot of red point. Let dry.
5. Color wooden handles bright red paint. After drying, screw them with self-draws and strengthen on the inside of the pallet-covers with wooden bars.
6. Drainage holes of the pots shut up with wine corks of the corresponding diameter.
Council
Decorate kitchen utensils by applique. Apply glue for decoupage on a ceramic pot and attach the menu torn to the strip, pre-softened in water. Cover the product with a thick layer of glue for decoupage. Remove excess glue and paper
You will need:
3 ceramic pots - 20 cm
3 ceramic pallet - 23 cm
Glossy enamel - white (aerosol), bright red
High Speed \u200b\u200bDrill With Thin Drill
Carbide bang -5 mm
3 wooden handles with self-draws - 3.8 cm
3 round wooden Bruck - 5 mm
Wine plugs
Sponge
3 pencil
3 flat brushes of different sizes
1. With the help of the spongy brush, cover the inner surface of the pot of golden enamel. The rim is painted in blue, below Make a pot pink, and closer to the bottom - blue. Using a flat brush, smear the border of the colors.
2. Place the product on a pre-coated surface of the desktop, upside down on a metal glass. Abundant cover the inner surface of the pot medium for glazing. Without waiting for drying, spray a pot with golden ink with an old toothbrush. Let dry.
3. Cover the pot by another layer of medium for glazing. While the glaze did not dry, plunge the thread into the black mascara. Attach the thread to the pot, and then remove the mascara will leave the thin line, which will give meter on the wet glaze. Attach the thread to the pot several times. Let dry.
4. Paint the pallet of black enamel. Wooden balls make raspberry. Let dry and glue them to the pallet.
5. Cover the pot and pallet with a glossy lacquer from the aerosol. Let dry.
Council
Simple and spectacular! Paint a few small ceramic pots in one color and apply the desired pattern on them - and the set of candlesticks is ready ..
You will need:
Wide ceramic pot - 10.5 cm
Ceramic pallet - 15.5 cm
Acrylic paints (metallic) - blue, blue, raspberry, pink
Acrylic enamel - black, golden
Medium for glazing
Glossy Lac.
Black mascara
Brushes - spongy (for applying base paints), flat
Golden ink
4 Wooden Ball with a diameter of 25 mm
Universal Adhesive Adhesive
A thread
Old toothbrush
High metal glass
1. Cut the leaves and attach them to the bottom of the pot, following the instructions of the wallpaper manufacturers. PVA glue is lined by plots that lay closely. Let dry.
2. Cover the surface of the pot with the applique of the yellowish-white paint base. Let dry.
3. Clean the entire pot of sandpaper, removing on the rim most paints. Watch dust.
4. Moisten a sponge with water. Apply varnish for decorative makeup on the pot, put a thicker layer on the rim. Let dry.
5. Cover the product with matte varnish from the aerosol. Let dry.
6. Put inside the pot of linen napkin or kitchen towel.
Council
The wine cooler is decorated with stencil painting with the image grape vine. Rectangular sheets of paper with printed statements attached to them are glued with glue for decoupage. Pallet decorated with leg ballsYou will need:
High ceramic pot
Acrylic paint - yellowish-white
Varnish for decorative composition - dark brown
Matte acrylic varnish
Scissors
Monophonic wallpaper with embossed pattern of leaves
Spongy brush
PVA glue
Sponge of cellulose
Sandpaper
1. With the help of the spongy brush, cover the outer surface of the pot of yellow paint base. Let dry.
2. Using the medium-sized flat brush, swipe in the upper and lower parts of the terracotta line product. Let dry. Transfer to the decorated surface of the drawings of the leaves.
3. Wide flat brush Paint the right half of each sheet into dark green color. Without waiting for drying, apply a flat strip of salad and light green colors with a medium-sized brush. Circuit the outline of the leaves of dark green paint with a thin brush.
4. Apply a light green paint on the left half of the leaves, decorating them with gas and yellow stripes.
5. Apply a light brown paint on a wide flat brush and make the left edge of each shadow sheet. Wake up light brown paint near the edges of terracotta strips. Let dry.
6. Cover the pot acrylic varnish from the aerosol. Let dry.
7. Cut the circle from the sponge with a diameter of 15 cm and place it inside the pot.
Council
High mining candlesticks from several pots can be used as floor decorations. Decorate them with pendants, braid and shiny fantasy patterns
You will need:
Ceramic Pot for Strawberries - Capacity 4 l
Acrylic enamel for outdoor work - Yellow
Acrylic paints - dark green, light green, salad, light brown, yellow, terracotta
Acrylic lacquer
Brushes - flat (wide and medium size), thin, spongy (for applying paint bases)
Pillow from sponge
1. Spread two pots on the rim. Stick to the bottom of one of them 18-centimeter pallet.
2. Fill the mounting foam inside the glued pots through the drainage hole, filling a little more than half of the tank.
3. Cut the heel and thoughts from the children's sock. The remaining part cover the thin layer of mustard paint. Let's dry and make a detail by the node in the middle.
4. Stick the ends of the sock to the top of the design of the pots. At the top, attach a 15-centimeter pallet. Let dry.
5. With the help of the spongy brush, paint all pots of the paint base of mustard colors. Let dry. Apply the desired drawing.
6. With a sponge, cover the plots near the mouth and the cheeks of the cat white paint. Make the belly white, strips - terracotta and brown. Draw a black paint eye and fruit with a thin brush; You can make it a marker. Coloring white paint eye proteins.
7. Cut the toes of the sock into two equal parts. Enclose by the inside side to white felt. Let dry. Cut extra felt. Fold every detail in half, start and stick to your head.
8. Cover the product with colorless acrylic varnish. Let dry.
9. Place your head on the torso. Inside, you can store a jar with a feline feed
You will need:
3 ceramic pots - 15 cm
Ceramic pallet - 15 cm
Ceramic pallet - 18 cm
Glossy acrylic enamels for indoor and outdoor work - black, mustard, brown, terracotta, white
Colorless acrylic varnish
Brushes - Sponge (for applying paint bases), thin
Children's sock
White felt
Universal Adhesive Adhesive
Sponge
Mounting foam
Scissors
Copy paper, carting and fountain pen
Putty, cement mortar
1. Make a larger pot on the rim five marks at an equal distance from each other. Drill holes to make rope.
2. Paint a big pot of paint cream color. Using the photo as a sample, cover a large pot of tape on the "steps" so that there are strips of different widths. On broad apply paint pink colour, on narrow - light green and cream, alternating colors.
3. Color the rims of the pots of smaller light-green paint, and the main part is pink.
4. Draw a round brush on all pots of dark green paint leaves and stems. Let dry.
5. Spray matte varnish on all pots. Let dry.
6. Stick the washers on both sides of the drain hole on a large pot. Cut 150 cm of hemp rope. Fold it twice and thread through the hole. Tie a node from above and below, leaving 25.5 cm. Make a double knot, grind through a drainage hole The pot of medium size and attach the bead. Tie the knot and cut the surplus rope.
7. Cut from the rope five pieces of 40 cm each. Tie them to K. drilled holes Big pot. Curtain the free ends of rope through drainage holes in small pots, fix the nodes and beads. Cut surplus rope
Council
Miniature pots can be used for the manufacture of Christmas decorations - all the same bells, features of animals, dolls
You will need:
Step ceramic pot - 15 cm
Ceramic pot - 6.5 cm
5 ceramic pots - 5 cm
Acrylic paints - pink, cream, dark green, light green, white
Matte acrylic varnish
Brushes - Sponge, Round
Scotch 100 mm wide
2 washers with a diameter of 38 mm
Pen's rope
6 large beads
Colorless waterproof glue
Drill and 6 mm drill for glass and tiles
Scissors
1. With the help of the spongy brush, paint the inner surface of the pot and its bezel with white paint. The remaining part of the product cover the color of the sea wave. Let dry.
2. Pencil stamps on the walls of a place for multicolored strips on the walls (see photo or your discretion). Apply paint with brushes of the appropriate width. After drying, you can make white paint desired inscription. Let dry.
3. Enclose shells to the rim using adhesive glue. On the rim, the pots attach pieces of cobalt glass. Let dry.
4. Apply a tile solution between pieces of cobalt glass between pieces of cobalt glass and evenly distribute it. With the help of a sponge, moisten this part of the product with water and align the solid with your fingers, pre-put the protective gloves.
Remove the surplus with a paper towel. Let dry.
5. Remove the solutions of the polishing pad.
Council
Ordinary Flower Kashpo remind you of vacation spent on the sea. Enclose shells to the walls waterproof glue or silicone sealant. After drying, apply a thick layer of glue on the free parts of the surface and sprinkle with sand. In conclusion, cover the product with matte acrylic varnishes from aerosolYou will need:
Ceramic pot - 21.5cm
Glossy acrylic enamels for outdoor work - lilac, white, sea wave colors
Brushes - thin, flat (thin and medium size), spongy (for applying paint bases)
18 shells - diameter of about 25 mm
Cobalt glass
Universal Adhesive Adhesive
Silence for tile
Sponge of cellulose
Water bottle
Pillow for polishing
Copy paper, carting and fountain pen
A narrow spatula for applying a solution
Paper towels
Pencil
1. Spread two pots on the rim. Stick to their base ceramic pallet.
2. Fill into the glued pots the mounting foam through the drainage hole. Fill them with foam slightly more than half, measuring the depth of the cart. Remember that mounting foam increases in volume.
3. Tie a packaging tape by the node in the middle. Put the ends on the glue over the bonded pots. Top rushing the third pot. Let dry.
4. Cover the product of the paint-based peach color. Let dry. Transfer the drawing.
5. With a flat brush, apply the shadow of beige paint along the contour. Triko and shoes paint the pink paint, the hair is terracotta. Draw your eyes and mark the facial features with a marker. Apply on the eyes of white dots, and on the cheek - blush.
6. Cover the product with colorless acrylic varnish from the aerosol. Let dry.
7. For the pack, fold the tulle in front of the twice, then again. Check out the folds. Expand one of them. Collect Tulle along the central fold. Put a bundle on the ballerina. Gently tighten the thread, tie her ends and cut the surplus.
8. Stick to the top pot of a sponge sponge. Disassemble artificial flowers on the petals and glue them to a sponge.
9. Stick the musical mechanism to the bottom of the pallet
You will need:
3 ceramic pots - 6.5 cm
Ceramic pallet - 7.5 cm
Acrylic paints - beige, peach, pink, terracotta, white
Colorless acrylic varnish
Brushes - spongy (for applying paint bases), flat, round, thin
Packaging tape peach color 30.5 cm. width / 6 mm
Universal Adhesive Adhesive
Black marker with thin rod
Musical mechanism
Pink Tulle - 115 x 15 cm
Stiff pink
A sponge sponge with a diameter of 5.5 cm
Artificial flowers
Mounting foam
Cosmetic blush and cotton brush
Copy paper, carting and fountain pen
1. Turn the pallet. Put one of the pots on it and make labels for driving holes. Do one in the center of the pallet, the other side is for the wire.
2. Spread the two pots of rim to the rim, as shown in the photo. The bottom of one of them attach to the inverted pallet so that it forms the base, and the holes coincided.
3. Apply paint-foundation. Make pots with dark brown, pallet - black.
4. Mix three parts of the medium for glazing and one part of gold paint. Brush apply the resulting composition on the pots. Lightly wipe the sponge to erase part of the glaze and thus create a special texture.
5. Transfer the marker drawings on acetate film and cut holes
6. Place the leaves on the surface of the pots, dispersed them throughout the lamp, and apply a golden paint through the stencil holes, distributing it on the surface of the stencil brush. Apply golden paint on the base of the pallet. Let dry.
7. Moisten a cellulose sponge with a mixture for glazing and cover it with it. Let dry and apply a matte varnish from the aerosol.
Collect the electrical part of the lamp. Install lampshade
You will need:
2 ceramic pots - 15 cm
Ceramic pallet - 15 cm
Acrylic Paints - Black, Dark Brown, Golden
Medium for glazing
Matte acrylic varnish
Brushes - spongy (for applying paint bases), screen, for glue
Shippoon
Sponge of cellulose
Acetate film
Knife
Black marker with thin rod
Colorless waterproof glue or silicone sealant
Drill and 6 mm millimeter drill for glass and tiles
Electrical part of the lamp; Cartridge, Extension Tube with Thread, Wire, Switch
Shade
Ladies' secrets. Casket. |
 1. With the help of a spongy brush, cover the pot of light green paint. Let dry. Council
You will need:
|
May the light be! Stand for garden torches. |
 1. Sponge brush apply a pot of enamel on the outer surface yellow color. Let dry. Council
You will need:
|
Any hostess is interested in making your home cozy, beautiful, revive it. Live flowers are a chic decoration of each house. Not a small role plays what a flower is planted in what pot. Often, it is necessary to face the fact that ordinary colors pots are not beautiful enough, they make interior simple, boring, and designer - not everyone affordable. Decor of flower pots do it yourself - perfect solution This problem! After all, you can decorate the pot as you wish, and you will be able to boast of guests to the guests.
In this article we will talk about different methods decorations that will enable you with ease to make elegant flower pots.
Everyone in the house, who at least once visited the sea, there is a collection sea Rakusheys, pebbles, multicolored glass. It is these souvenirs that can be used to decorate the color tanks. Sea pebbles, glass can be found in any store, now it is not a problem. It is quite beautiful to combine marine souvenirs with different small objects (coins, buttons, fragments of a broken dishes, tiles).
It is very important before gluing the seashells on the rone, be sure to wash them and degrease.
Blind the parts on the surface of the tank is best building glue, which has a high viscosity, quickly dries. In order to better strengthen seashells, stones, glue must be applied to objects and a pot. After applying glue, decor elements must be pressed to the surface of the tank and hold a couple of seconds.
After, the convex side is out, the fragment of the shell is attached. It is necessary to attach it tightly to the surface, but very carefully, so as not to break. You can correct the position of parts using a needle or toothpick. After all the work done, the decorated surface is covered with PVA glue.
Decoupage is a decoration method at which you use various paper pictures, cut paper, napkins. This technique can be used on clay, plastic, corrugated pots. Technique is very simple.
Doing the decor with your own hands, you can select the steps:
Special sophistication decor of flower pots will give beads, beads.
Very gentle and magical is a way to decorate flower pots with a lace or lace with burlap.
The use of ropes and threads takes place in different ways to decorate the flower pot. They act as an additional element, which betrays a refinement. For example, you can decorate the carcaspa vase, give it tenderness with the help of lace, tie everything (without using glue) thread or rope brown color. This method will emphasize the shape of the vason, make it beautiful.
Decorating flower pots with their own cloth - easy way Refresh and decorate your kashpo.
The cloth for the decor can pick up one for several pots, making a certain ensemble, or different, at your discretion. The finished product can be decorated with lace, beads, etc.
Need:
We start working with the fact that we cut off the necessary piece of fabric. In width, it must completely cover the vase, in length - to be slightly more, to envelop the bottom and top of the inside of the tank.
A drawing or an inscription on a flower pot looks very mysterious, they contribute a certain note of the magic. Translation inscriptions and drawings on the clay dishes are very elegantly, it is also possible to experiment on plastic, ceramics.
Decoration of the crop is also a fairly good idea of \u200b\u200bthe decoration of pots. As they say, cheap and angry!
Establish:
In order to give the surface of an extraordinary relief, decorating it with paper and glue. We are dragging the glue with water (somewhere half of the glue, 1: 1). Napkin tear into small pieces. Using the brush, we apply glue to the napkin and glue the surface of the dishes. Making small embossed folds. In this way, we give all the free space and leave for a while.
After the glue is dry, proceed to the fast. To begin with, we applied the undeveloped glue to the folds, then sprinkle with a cereal on top. Wire a sponge and leave to dry.
Next, proceed to painting. Using the brush completely stain in a silver color, dry.
After the paint dried, decorate the vase with the help of gold paint, staining only the part where the pshelno is. Cover from above varnish.
