Lifting of furniture- 200 r. Behind the floor
(With a working elevator, the cost of lifting will be - 400 p. The first and last floor is considered)
Furniture assembly- 10% of the cost
Remote District Delivery is paid regardless of the order amount.
For orders more 15 000 rubles - Delivery 0 rubles
For orders less 15 000 rubles - Delivery 350 rubles
For orders more 15 000 rubles - Delivery 0 rubles
For orders less 15 000 rubles - Delivery 350 rubles
The item leaves from the regional warehouse of the city of Barnaul with the help of transport companies.
The cost of delivery services from G. Barnaul to your city, first of all depends on the weight and volume of the goods you have chosen, on which the services of transport companies (as a rule, in all transport companies on the official site can be checked for the delivery of goods delivery, knowing weight and volume).
Shipment of goods is carried out at 100% payment of goods.
Delivery transport company in Barnaul is 350 RUb., which will be included in the goods. When ordering from the amount of 15000rub Delivery to the terminal for free.
For the delivery from the city of Barnaul - in your city, you calculate when receiving a product on the company's terminal or when receiving at home (provided that the transport company carries out this service and you ordered it).
We work with all the well-known transport companies. And be sure to take into account your preferences by its choice.
If you find it difficult, then our specialists will select you a transport company based on your preferences in the price and quality of services and will tell you the cost and delivery times, considering your order.
Recommendations for shipping through the transport company: Order additional rigid packaging (cruise) on your cargo.
It represents wooden frame, It is suitable for almost any cargo, especially for the transport of fragile, beating, large and non-standard goods. Please note that we do not send glass and fragile products without crate! Such packaging protects against unauthorized access and damage. The cargo package service is on the terminals of transport companies.
In the event of a marriage during transporting in rigid packaging, you have the full right to make a complaint with a transport company for compensation for the cost of cargo.
The cost of tough packaging (crates) You pay the transport company on the fact of getting the cargo. The cost of the service is different from various transport companies (about 700 rubles).
Also, it is worth understanding that the cost of transportation of cargo will increase, since dimensions and weight of the cargo will increase.
How to arrange?To make the delivery of cargo in rigid packaging (cladder), during the ordering in
Delivery within the Moscow Ring Road - 950 rubles, for the Moscow Ring Road - 30 rubles. / km. Possible pickup. Payment upon receipt of cash or bank card. If the goods are in stock, then delivery for 1-3 days, in the absence of a warehouse - under the order from 1 to 2 weeks. Delivery days: Tuesday-Saturday. The maximum delivery distance for the Moscow Ring Road is 100km. Delivery to TC - 1000 rub. (with a mandatory crate). Manufacturer - Vita Furniture.
Lifting on a cargo elevator for one loading: walls up to 250cm - 500 rub., Walls more than 250 cm - 700 rubles; Cabinets and hallways up to 150cm - 500 rubles, cabinets and halls up to 250cm - 700 rubles., Cabinets and hallways from 250cm - 800 rubles; Baby and bedrooms -500rub.; kitchen -500 rub.; Dressers, shoes, writing tables - 200 rubles; Computer tables - 300rub., Mattresses-100rub., Sofas for free. Lifting on the floor for the floor: walls up to 250cm - 150 rub., Walls more than 250cm - 300 rubles; Cabinets and hallways up to 150cm - 150 rubles, cabinets and halls up to 250cm - 300 rubles., Cabinets and hallways from 250cm - 350 rubles; children's - 250 rubles, bedrooms -300rub.; kitchen -250 rub.; Dressers, shoes, writing tables - 100 rubles; Computer tables - 200 rub., Mattresses-50rub., Sofas 250P.
Assembly - 10% of the order amount (but not less than 1500 rubles). Departure of the collector for the Moscow Ring Road - 30 rubles. / km. Assembling dresser, written tables and shoes minimum 800 rubles. The assembly is carried out in coordination with the client in terms of 1-3 days. Remember, if desired, the assembly can be carried out on your own.
After the repair is completed in the kitchen, you will certainly decide to buy a new kitchen set. As a rule, stores provide assembly services for an additional fee. But why pay money when you can save? After all, the kitchen assembly is not so complicated, as it seems at first glance.
To assemble the kitchen yourself, you will need a minimum set of tools.
If you have not dealt with the furniture assembly before, before assembling the kitchen, be sure to learn the standard instruction. It shows which details for which are used, as well as the procedure for work.
If you screw the item not in your place, you will have to disassemble it, and this will reduce the strength of the connection. This is especially true of cheap cabinets from chipboard modules, often the doors of them come out along with the root.
The process of assembling the mounted cabinet can be viewed on this video:
We proceed to the second stage - setting the kitchen in place. Doors do not hang yet, they will interfere.
Be sure to need an assistant who can support a countertop when sawing, otherwise a piece will disappear and torn part of the coating. To make this work itself, you can pre-stick a paint ribbon on the table top. After you spill a round hole, the piece will remain hanging on the tag.
The attachment of mounted cabinets should occur at least 60 cm above the table top, otherwise it will be inconvenient.
Close up the gap between the table and the wall by installing the plastic plinth. Its first part is attached by self-drawing to the wall, and the decorative nozzle is snapped on top. Special plugs are used to decorate the corners. Usually inside the plinth can be placed hidden wiring.
Next is made household appliances. For gas stove Secure the hood at an altitude of 75-85 cm, and for electrical - 65-75 cm. To hide it in the closet, you abandon the hole for the duct in the upper wall of the cabinet.
Now you know how to collect the kitchen with your own hands, and can easily do it. The main thing to approach the assembly carefully, as the Russian proverb says: "Some seven times, a rejection once." It is due to insufficient measurements most of the mistakes of inexperienced masters are performed.
In our country, people are engaged in their home in the apartment independently. As far as this is the right decision - each owner must be determined for himself. In our article we will describe how to assemble the kitchen headset.
To get a quality result, any work requires preparation. Build kitchen is no exception.
Check the availability and efficiency of all required tools. Charge the screwdriver battery, prepare the electroller. Electrical engineering can be replaced by mechanical instruments, but it will only increase the time and complexity of the kitchen installation.
You may also need:
Review the set of furniture for defects and the presence of all items. If you find a noncomplex or auction, you can contact the supplier or purchase yourself what is missing.
Read the instructions for collecting that set. kitchen furniturewhich you purchased. In the kitchens produced by different manufacturers, there may be their own features on the installation that should be taken into account.
Remove from the room all unnecessary to free the space for the assembly, remove all the garbage. Floors should be clean.
Note! So that in the installation of cabinets do not damage flooring, It is possible to store the floor with a tarpaullet or other web.
After preparing and checking the tools, elements of furniture and premises, you can start the assembly.
To properly assemble the kitchen, you must first get acquainted with the features and rules of installation.
Opinions about the top or bottom cabinets start mounting the kitchen, separated. Some experts believe that already installed floor stands may prevent the process of installing suspended cabinets. According to other furniture makers, it is necessary to start from the bottom row, from which the height of the fastening of the upper cabinets is already measured.
You can choose a convenient option for you. We describe the first case. But first need to tell general principle Collection of cabinets and drawers.
Some of the most convenient devices kitchen headset are retractable drawers. If we are talking about narrow cabinets, for example, about bottled, then the fixing of the guides for the boxes is produced before the box itself will be assembled. If the cabinet is wide enough, the installation of all attachments for drawers is made after assembling the module.
At the preliminary stage, the crosses from the loop hinge are also attached to the designated places. After that, they start directly to the groove assembly.
Step 1. Take the side wall of the drawer and put it with an end on smooth surface So that the facade part look up.
Step 2. Dock the cabinet wall at a right angle with the bottom and fix the connection of the confirmates. In factory cuisines, holes for European programs are usually already prepared.
Step 3. The other side wall is attached in the same way.
Step 4. After that, you install two top strips if the lower tumb is assembly. At the hinged cabinets mounted the lid.
Note! The ends of the side walls must be in the bottom, as well as a lid or upper straps.
Step 5. It is placed on a flat surface with a facade side down and measured it diagonal, the difference between the lengths of which should not be more than 1.5 mm.
Step 6. Fix the back wall of the cabinet with the help of a bracket or nails, placing them at a distance of 7 cm from each other. In order for the rear mount to be more durable, some specialists instead of nails and furniture brackets apply screws.
Note! The cabinet, over which the washing will be installed, does not have the back wall, but often supplied with an additional rigidity edge.
Step 7. Adjustable legs are attached to the bottom of the floor cabinets. The distance from them to the nearest edges should be about 50 mm. The legs can be metallic or plastic.
In the first case, they perform not only the support, but also a decorative function. Plastic products at the end of the kitchen mounting are closed with a base plate. Suspended structures Purchase loops for mounting to the wall.
The drawer is going to the same principle.
Step 1. Four straps connect with each other at right angles to get a box.
Step 2. Measure diagonals whose lengths should not differ from each other.
Step 3. Fixed guides to the side walls of the box.
Step 4. Mounted the facade of the box with screws. Sometimes the front wall of the box can serve as a facade. In this case, it is attached to the side crossbars with the help of eccentric. But such a design is rarely found in modern kitchens.
Measure diagonal, both diagonals should be the same
Boxes are better to collect already after the upper cabinets and lower stands are collected and installed.
As noted above, so that the lower row of Tumben prevented, many experts recommend first to hang up the top cabinets.
First of all, the location of the attachment correctly. For this, the floor is laid out the height on which the bottom of the cabinets will be. If a person who will work in the kitchen most often has an average height, then for the bottom of the cabinet, it is recommended to measure 1.3 - 1.4 m. Then the height of the cabinets themselves is also set up from this mark and mark the line where the fasteners are installed. The line must be smooth and horizontal, which is checked by mounting level.
Note! The distance between the worktop and the upper section should be about 0.6 m. Therefore, if you decide to start mounting from the lower Tumb, then measure it from them up to select the height of the upper cabinets.
You can hang cabinets in different ways:
Note! Through the upper section, the headset often pass the exhaust air duct and gas pipe. For this reason, in all the cabinet, it is necessary to pre-cut holes for these communications in all the cabinet. The places of all sleeps need to be treated with sealant.
The first way to install mounted cabinets includes the following steps.
This procedure is repeated for all cabinets.
The second fastening method facilitates the installation of the upper section. In this case, it is necessary to consider that in this case there is no possibility to attach the cabinets close to the wall. This installation of the upper cabinets, though roads, but very simple:
When the entire top row is mounted and aligned, the cabinets should be pulled with each other furniture screws.
After the installation of the upper sections is completed, you can begin installing floor cabinets.
Note! In the lower stands, too, you will need to make holes and recesses for sewer, plumbing and gas pipes, as well as for connecting electrical appliances to the network.
Step 1. Starting from the corner, the cabinet is installed in place.
Step 2. Adjust the legs of the couch.
Step 3. Install and adjust in height and other cabinets.
Step 4. Strip the adjacent cabinets of clamps, and then the furniture screed.
After that, the tabletop is installed on the stands. First, it is necessary to cut the hole for the washing with a jig.
If necessary, the countertop make a hole for hobs And for communications.
After that, you can install the table lid in place. It is often done with the help of furniture corners, which are screwed to the side walls of the cabinets. The countertop is laid on the cabinets and align.
If the cover of the Tumba consists of two parts, they are connected using metal planks as follows:
After that, they fix the tabletop on the couches by screwing into the openings of the furniture corners of the screws.
Completion of installation does not require so much physical effort as accuracy in work. After all, the appearance of the headset depends on this stage.
Now the kitchen is ready for operation.
Also read also on our website an article about facades for the kitchen with your own hands.
Delivery prices in Moscow are looking in product descriptions.
Delivery according to the nearest Moscow region (within 50 km from Moscow Ring Road): 30 -40 rubles / km. if the distance is more than 50 km 40 rubles / km.
Attention: Furniture delivery within the third transport ring is strictly produced up to 7 in the morning!
Payment of the order is made upon receipt of goods in cash.
Furniture delivery is carried out on certain days.
The telephone dispatcher coordinates the conditions and time of delivery with the client the day before the order is shipped.
Furniture made by Vladimir Factory is delivered to the entrance for free (according to Vladimir), the cost of delivery of furniture production does not specify Vladimir factories from managers.
Delivery on the Vladimir region - 30-35 rubles / km.
Delivery to the transport company Moscow: 900 -1900 rub., Not all products are available).
Delivery to transport companies with shipment in Vladimir Is free. (Not all products are available).
- Business lines (cost calculator)
- PEC (cost calculator)
- ZheldExpedition (cost calculator)
- Energy (cost calculator)
- Baikal service (cost calculator)
- GTD (cost calculator)
Delivery to other transport companies with shipment in Moscow - 900-1900 rubles, depending on the goods.
Delivery to the regions is carried out by a transport company (any) agreed with the buyer. The services of a transport company, with the help of which the delivery was carried out, the buyer pays separately.
When ordering furniture to other regions of Russia requires 100% prepayment. After placing the order to you on email A bill will be sent to pay.
The cost of lifting is determined by the forwarder depending on the complexity of the drift.
Lifting with a freight elevator:
from 500 to 1500 rubles. For the flight, depending on the weight, dimensions of the product and the number of modules.
Taken on hand:
250 rub. / Floor - bed, table, chair, children's sofa, chest of drawers, cabinet;
300 rubles / floor - sofa, kitchen sofa, wardrobe, hallway;
350 rub. / Floor - corner sofa, kit soft furniture (sofa and two armchairs);
350-500 rub. / Floor - wall long no more than 3 meters, modular furniture.
1000 rub. / Floor - wall longer than 5 meters long.
Assembly of cabinet furniture - 10% -15% of the cost of goods and complexity of the assembly.
Assembling cabinet furniture in cramped conditions (vertical assembly) - 15% of the cost of goods.
Installation of furniture (kitchen hide, built-in wardrobes) - 20% of the cost of goods or contractual.
Assembly of upholstered furniture - 400-1000 rubles.
Assembling beds from an array - 500-1000 rubles.
Children's assembly bunk beds - 700-2000 rubles, accurate - 1000-2000 rubles.
Assembling dresser - 10% but not less than 1000 rubles, computer tables - 1000 rubles.
Assembling kitchen corners (without sleeping space) - 800 rubles, with a sleeping place - 1000 rubles.
Furniture comes in disassembled form in factory packaging. If your order is completed with windows or mirrors, check the integrity of the fragile material. After receiving the order and inspection of packages, the warranty on the bearing parts does not apply.
All goods presented on the site extends the manufacturer's warranty - 18 months from the date of sale.
Repair of furniture is carried out only if the rules of operation of the furniture are observed.
Currently, all manufacturers' factories reserve the right to carry out minor changes in appearance and components made models, without warning about this dealers and buyers. Also, furniture fittings may not be identical to the samples presented in the photos. Such changes are made to regularly update models or in the case when manufacturers of handles, legs and other furniture fittings stop their production. Therefore, when buying furniture, be sure to indicate the material criteria for you (in