House, design, repair, decor. Yard and garden. Do it yourself

If there is a sewage in the house, then the blockages in it are almost inevitable. They arise for various reasons and eliminate various methods. In any case, if the wastewater ceased to leave the house, the cleaning pipe is needed. Methods to eliminate blockages range from the use of a regular ventusion prior to the use of complex professional equipment. Today we suggest you to figure out what method when it is better to use.

Why are sewage pipes clogged?

Even the most accurate mistress is not insured against the occurrence of the congestion in the sewage. It may arise due to such reasons as:

• accumulation of fat deposits;
• cheating sewer pipes;
• entering the sewer sewage tissue;
• deposition on the walls of the pipes of calcium precipitate, rust, etc.

These are the so-called operational and mechanical congestion. To eliminate them, it is sometimes enough to dissolve or destroy the accumulated in sewage system Substances.

In addition, there are technological congestion that occur due to the state of the pipeline. The reason for this congestion can be:

• wear of sewage equipment;
• incorrect system design;
• excessive amounts of pipeline turns;
• small diameter of sewer pipes, etc.

In order to cope with this kind of problems, large-scale restoration work may be needed. Especially dangerous to sewer such garbage, like hair and animal wool. This is very durable substances, to remove the plug formed of them is extremely difficult.

If atypical noise or appeared from the sewage unpleasant odorsThis may be the first sign of the emerging blockage. The use of special household chemicals will help prevent the problem.

Use of Vanuza and Santeh Cable

Solving the question of how to clean the sewer pipe, many mistresses and hosts turn to such a simple and ingenious device as Vanutuz. It is installed above the drain hole and several times vigorously pump air into the sewage. As a result of such a mechanical impact, the base is destroyed. Then you need to turn on the water that will wash the residues of the accumulated garbage.

Before applying the vehicle, it is recommended to close the hole of the overflow with the lid or cloth. Otherwise, it will not be possible to provide a sufficiently high air pressure in the system, and the application of the vehicle will be ineffective. Sometimes you need to use Vatuz several times to achieve the desired result.

Vanatuz is the most common mechanical tool for cleaning the sewage. It must be tightly pressing the drain hole and press a multi-time

If the blockage was formed deep in the pipes, Vantuz may not cope with it. Then the owner of the house will have to be armed with another popular hand tool - cable.

Special sewer pipes is a dense steel spring a length of several meters. For ease of use to one end of the cable, the handle is attached, and a number of different nozzles can be used for the other end.

When cleaning, the cable is lowered into the sewer hole until it reaches a blockage. The device is then starting to rotate in order to be mechanically destroying the resulting obstacle.

Cable for cleaning sewage is successfully used to eliminate dirt and trash, accumulated at a depth of several meters. Nozzles allow you to use this device even more efficiently.

If you need to make the maximum force to eliminate the accumulated dirt, you need to rotate the clockwise cable. When rotating in the opposite direction, the spring may dismiss and the cable will be damaged.

Using household chemicals

Effective cleaning of sewer pipes is also successfully performed using special gels or powders. You only need to carefully read the instructions and accurately follow the instructions of the manufacturer. Usually, the procedure is reduced to pour the powder or pour the gel into the drain hole and wait for a while.

If after the time specified by the manufacturer, the accumulated water does not start decree, should be used by the VATUZ. Several energetic movements will help eliminate the blockage, which has already been exposed to chemicals.

If such means for quick cleaning of sewer pipes for some reason are not available, you can use substances that can be easily found in any kitchen. The easiest option: pour into the drain hole a couple of liters of boiling water. Sometimes this is enough enough to dissolve a fat traffic jam. And in general, as the prevention of operational blocks, it is recommended every time after washing a very oily dishes poured boiling water into sewer. Fat will be more efficient to wash off from the walls of the sewer tube and the probability of a block will significantly decrease.

The usual food soda allows you to create an alkaline medium in the pipes, dissolves blockages and disinfects the pipeline from the inside. It is also used in conjunction with vinegar, salt and other substances

There are several recipes on how to clean the clogged sewer tube soda. An ordinary food soda is effectively used in combination with vinegar, salt and other substances.

Soda and boiling water

Procedure:

1. First you need to pour into the sewer near the liter of boiling water.
2. After a quarter of an hour, try to clean the sink by Vatuz.
3. Then pour a glass food Soda And pour three more glasses of boiling water.

If necessary, this procedure can be repeated several times. An alkaline medium is formed in the sewage, which not only cracks the blockage, but also disinfects the walls of sewer pipes.

Soda and Sol.

Procedure:

1. Food soda and a mustache salt mixed in equal proportions, for example, half a glass.
2. The mixture is poured into the drain hole.
3. Approximately 1 liter of boiling water are poured.

After that, it is necessary to allow the mixture to act about 8-12 hours. During this period, it is not recommended to use sewage.

Soda and vinegar

Procedure:

1. First, half of the glass of soda falls asleep into the drain hole.
2. Then the same amount of vinegar is poured.
3. The drain hole is closed with a plug.
4. After about two hours, approximately liter of boiling water is poured into the sewer.

Please note that with alkali compounds (soda) and acid (vinegar), a large amount of foam is formed and carbon dioxide is released.

Professional assistance in complex clouds

In most cases, the methods listed above are effective, but it does not always happen. If you could not solve the problem on your own, it's time to invite specialists. To begin with, they will spend the video of the state of the sewer system, in parallel, finding out not only the place and nature of the blockage, but also the general condition of the pipeline. Then one of these methods will be applied as:

• the hydrodynamic method in which the water jet is supplied under the sewage system high pressure;
• thermochemical cleaning with special Toolsheated to high temperature;
• pneumohydropulse sewage cleaning by transmission through the second power pulse exposure system.

Thanks to modern equipment, the brigades are coping with a blockage in the shortest possible time.

Sliding sewage in the private sector is a common phenomenon. It makes no sense to seek help every time for help to the plumbing. Clean the pipes at home can be done with your own hands using mechanical devices or people.

Causes of stammer

Crane pipes in the kitchen can for reasons:

• Pipes made of cast iron clogged more often due to the fact that their inner surface is buggy. This is due to the constantly flowing corrosion process. Particularly can be clogged by a segment between the bathroom and the kitchen sink;
• Plastic pipes are less susceptible to clogging. This happens if their installation is made with incorrect observance of the slope;
• The precipitate on the walls of the canalization of fat leads to the fact that it is marrying. Over time, a thick layer is formed, and the pipe loses the passability;
• The aqueous impurities contain a limestone falling on the walls of pipes;
• The source of pollution is land and sand, which fall during the washing of shoes;
• If the pipes have been hammered by large objects, then you need to call a specialist. Works will be conducted by the hydrodynamic method. Often this happens in high-rise buildings;
• The cause of clogging can be detergentshaving active substances. They, like fat, fall on the inner surface of the pipes.

What material would be made by pipes, the question constantly arises how to clean the sewage in the private sector.

Methods of cleaning

Answering the question than to clean sewer pipes At home, you need to accurately establish the place and cause of water impassability.

The main methods for cleaning sewage in the kitchen:

• Carry out cleaning with screwdrivers;
• Mechanical cleansing;
• Using chemicals.

If there is a blockage in the pipes, the elimination at home is carried out by any of these methods. In the private sector, the task is facilitated. Here work is the opportunity to spend in the yard.

Cleaning sewage

Usually cleaning sewer pipes is more often carried out in the kitchen. Here there are more fats, hair or food waste. Works in these premises are permanently held. You need to follow four items:

1. In case of strip cast-iron pipes It is necessary to regularly pass 1 liter of boiling water through them. If there are plastic sewage, it is enough with a duration of 20 minutes to skip hot water. The jet to do a little. If stuck a piece of soap, it will quickly dissolve;
2. In a glass of water, as much soda and half of a glass of salt falls asleep. Such a mixture is covered in the sewer pipe for 15 minutes. Then you need to let the water from the water pipeline, rinse the system and in parallel to carry out the cleaning operation to the vehicle;
3. Use a vacuum cleaner with blowing function. If with the help of a rag, reduce the diameter of the tube of the vacuum cleaner, then the sharpness of the air flow will increase. If you send air jet In the drain, it will push the plug;
4. If in the kitchen you need to wash the siphon closed, then it is removed, eliminate all the garbage and washed under running water.

In the case when such methods do not lead to success, more serious measures are applied. However, first find out the location of the blockage. Specify that it was a pipe that clouded, and not a siphon.

To do this, fill in water all the plumbing devices and conduct observation:

• If stagnation passes only in one node, for example, in a sink, only local networks were clogged;
• If water has been established in all plumbing places, then clogging is complete, and it is necessary to solve the question with the involvement of masters.

Local clearing sewage is carried out on its own. To do this, the siphon is removed, the corrugation is removed, and the flushing is carried out with the help of chemicals or cable.

Mechanical methods

To know how to clean the sewer at home, if serious clogging happened, it is important to understand which apply tool to break the plug into small components. Then its constituents simply wash off the water flow. This method is often used in the kitchen, where food residues are often the cause of the blockage.

Clean the pipes in the sewage can be using a vehicle, which works on the creation principle hydraulic pressure Due to vacuum formation.

Instructions for use:

• The sink is filled with water;
• The base of the tubuz is pressed against the plum and sharply pressed;
• Several times there are progressive movement up and down. The last movement up the device sharply breaks away from the plane. It is important to do it caution so that the parts of the sink are not broken;
• Such work is carried out up to 4 times.

In the case of double shell, it is required to be cleaned with two vehicles at the same time. For this you need an assistant. If this is not, then one plum is closed with a rag.

Santechnic cable

It is a wire with a handle, at the end of which the rash is located.

Instructions for cleaning:

• The rope of the rash is entered into the drain;
• With the help of the handle there is a scrolling of the wire. At the same time the pressure is performed down, and then up. You need to pierce the cork until it goes out;
• Times the water is served so that the fine garbage is washed away.

Knowing how to break through the plugs can thus clean metal pipes. At the same time, rust is removed from the inside. If the pipes are plastic, then instead of the rash, the cable is taken with twisted wire, so as not to damage the material.

Other Means

How to clean the sewer if there are no cable? Then the homemade devices go to the move:

• Scotch top to donomose on the spirals passes plastic bottle. On the border of the scotch on the bottle, line is carried out;
• The lines are made on the bottle;
• Bottle dyshko is used as a handle;
• At an angle of 45 degrees in the form of a spiral, notches are made;
• The device is inserted into the plum hole, and then removed. The spiral pulls garbage on itself.

Chemical methods

Industry provides an extensive selection of policies from a clogging that promote sewage cleansing.

• In liquid form. Tire "Tyret" and "Mr. Muskul" with the presence of ammonia odor;
• In the form of powder. For example, Comet. If there is no passability at all, the use of such a means is meaningless;
• Acid. "Mole". Before use, you need to pour into the boiling water system. After using the drug, rinse well with running water;
• Alkaline. Domasetos, "Whiteness".

How to clean the sewer using these funds, indicated on the package. It is necessary to familiarize yourself with it.

Folk ways

Calming sewage treatment with folk remedies is used when there is a fear of applying chemistry. In a private house, a salt with vinegar is often used. This method has tangible advantages in the form of cheapness and ease of use.

Salt, being alkali, enters into interaction with acid-vinegar. Heated occurs, and carbon dioxide is distinguished. Such a mixture affects the walls, removes the flare from them.

In the drain hole, the soda falls asleep in the amount of half of the pack and half the bottle of vinegar, which is slightly heated. The hole is closed by a plug. Waiting time - 2 hours. After that, there is a washing of sewage with 3 liters of boiling water. All dissolved garbage will leave with water.

If there is no soda at hand, but there is a means of Alka-Zeltser, then it can act as a replacement.

Two tablets are thrown into the drain hole, and 1 tablespoon of vinegar is added. Then the system is washed with boiling water.

Cleaning in the bathroom

Washing shower hose:

• From the shower hose, the watering can and the sealant is removed;
• The hose to the hole is applied, and water is started under the maximum pressure;
• The procedure continues for 8-10 minutes;
• If you have multiple holes, the rest required to close;
• This procedure is carried out with the rest of the holes in turn.

Cleaning siphon

With local pollution, siphon siphon is usually clogged. To clean it, you need:

• Unscrew the plastic nut;
• An outlined siphon is placed in the container;
• A mixture of vinegar and soda is poured into the opening hole of the pipe;
• As soon as the reaction comes to an end, a glass of vinegar is added.
• After the start of the hissing process, you need to continue to add vinegar to the reaction stop;
• After 20 minutes of waiting, a filling of 3 liters of heated water is carried out;
• Siphon is placed back with a twisting of a plastic nut.

If, when removing the siphon, the system will not be scored, the use of the mixture is not required.

Elimination of smell of plum

To begin with, the plug is being removed. The following activities are held:

• Falling asleep into the drain hole dry mustard. Then washed off;
• You can use a chlorine solution. He eliminates all odors, but installs his;
• The problem can be solved by air freshener, but not long.

In the event of a violation of the installation instructions, the siphon will occur the absence of a hydraulic assembly that does not allow the smell to outward. You need to check the siphon on the installation of the installation:

• In a bottle siphon drain pipe Located below than the water level. Otherwise, evaporation will be held over a water shutter;
• Perhaps the pipe has changed its position or was installed incorrectly. It takes it to fix and fix it.

Other reasons for water stagnation in the sink

Sometimes the reason lies not in the clog of the system, maybe:

• Clogging of the siphon itself. It is necessary to clean it;
• The corrugation between the siphon and the sewage was clogged or improperly curved. It is required to correct its position;
• Corks were formed in places of joints, where silicone seals are located. It is necessary to eliminate traffic jams.

Prevention

It is carried out in order to reduce clogging:

• It is impossible to pour out fatty waste into the shell;
• Try to do not fall into it the remains of food, they are better to throw in a bucket;
• To drain the mesh to drain, so that small waste in it is delayed;
• Hair should not fall into the sink;

All household drains go through the sewer pipes. Everyone everybody falls into the water, hair and other trash. All this becomes the cause of the cloth even in smooth plastic pipesoh. Alone to cope with the situation will help the tips, how to clean the sewage system at home.

Crashing stock in the kitchen - common situation

What provokes the appearance of a blockage?

Water standing in the sink or bathroom, the appearance of an unpleasant smell is signs of the formation of a blockage in the sewer tube. Common causes of its appearance are:

• operation of kitchen sink without mesh;
• entering large garbage in the toilet;
• fat accumulations in pipes;
• insufficient slope of the sewer highway.
• in autonomous System Warning of the pipe or damage to the system can occur.

During the operation of cast iron pipes over time, there is a significant decrease in their diameter due to deposits and corrosion on the walls. The line with a cross section is less than necessary quickly clogs and requires solid cleaners.

Attention. Frequent clogged areas include: Outers of kitchen sink, bathtubs and toilet bowls.

Simple ways to combat blockage

Called sewage in a private house, what should I do to restore her work faster? This question periodically arises from everyone. Eliminating the trash plug does not always require the use of complex methods and special tools, it is worth trying to solve the problem with simple and affordable means.

Vantuz

This common plumbing tool is in every family. It consists of a smooth wooden handle and a rubber bowl at the end. Cleaning sewer pipes by VATUZ is performed according to the following scheme:

• If there is not enough water in the sink, then it should be gained to the height of the bowl.
• The device is pressed against the drain hole, and progressive movements are performed up and down.
• Next, Vanutuz rises sharply if the water is fast glass into the hole, it means that the work is over. If you need to move the device repeated several times.

Pressure created by Vanatuz, makes garbage to move away and continue the movement along the pipe.

Punching by Valaum Vodo in Toilet

Council. If there is overflow, you need a hole to close the plug, otherwise it will not be possible to create pressure in the system.

Digging boiling water

The main reason for clogging pipes in the kitchen is a large amount of fat deposited on the walls. Hot water effectively dissolves such sediments, so it is worth opening a hot tap and try to rinse the system.

Dissolve fat will help folk remedy - Soda and vinegar solution. This method is very simple and everything you need in the kitchen. Before you clean the sewage and vinegar, you need to prepare a rig for pluming. To work, you will need:

• glass of soda;
• a glass of 9% vinegar;
• bung.

In the dry stock of the shell, the soda falls asleep and vinegar floods. The hole quickly closes the cooked object. Substances come into a rapid reaction, in the process of which deposits on the walls of pipes are split. No less effective vinegar replacement will be lemon acidwhich gives an active response when interacting with soda. After some time, washing sewer hot water.

Pipe cleaning methods

All activities for cleaning pipes from clogging are carried out in one of three ways:

• mechanical cleaner - performed using a special tool;
• chemical cleaners - active reagents in the form of powder, solution or gel decompose garbage;
• hydrodynamic purification - acts using water pressure under pressure.

Tools for mechanical method

The use of vanza, also refer to mechanical cleaning, if its use does not give the result, go to the plumbing cable. It allows you to cope with the trash cork accumulated at a high distance from the drain. Cable for cleaning sewage is made independently made of metal wire. The factory version is performed from a flexible helix and ends with a handle. You can enter it through the line of revision, or removing the siphon under the sink.

Plumbing cables differ in diameter and length, for use in a private house there is enough tool with a cross section of 6-9 mm and a length of 5-6 meters. To increase the efficiency of use to the cable, nozzles for the toilet are offered, in the form of a brush or hook. Work is performed in a specific sequence:

1. It is necessary to close the floor at the place of work with a polyethylene film, and put on the hands of the gloves. Preparatory activities will protect against contamination by uncleans that can flow out of the pipe.
2. The tip of the cable is inserted into the pipe and carefully pushed inside. In the process of movement, the tool rotate in one direction.
3. When the obstacle cable is reached, progressive movements He is trying to destroy on separate fragments.
4. With a large cloud, the cable is getting up and cleaned. Mechanical sewage cleaning ends with a burden of a large volume system hot water.

Council. For cleaning plastic pipes, a soft spring cable is suitable, it will not hurt the pipeline wall.

Cleaning pipes

There are electrical cables with which the sewage pipes are cleaned with their own hands in difficult situations. The device has a drum, a pistol-type handle and a set of nozzles. The device is placed in the pipe and works like a drill, destroying any blockage.

Drugs for chemical cleaners

Sewer barns are divided into several types:

• mechanical - arise as a result of hitting a large garbage;
• technological - appear when wearing pipes or design errors;
• operational - accumulate in the process of using the pipeline.

If an object that has fallen into the system can be obtained only by a mechanical way, the operational blockage is amenable to the action of special means. Usually it occurs because of the sediment on the walls of the fat, attracting and holding a different small garbage.

Alkaline drugs

Cleaning sewer pipes at home is possible without the use of tools and promotion of fittings. To do this, it is necessary to use one of the chemicals presented in a huge amount. Preparations have a different consistency:

• powder - dry matter is easily falling asleep inside the pipe;
• gel - economical and effective toolcovering the entire surface of the walls and slowly flowing;
• liquid - used for complex blockages.

Anyone chemical Aggressively, before it is used to put on gloves and leave the room after applying, so as not to inhale the pairs.

Council. It is impossible to leave the drug in the pipes longer than the manufacturer recommends. The active substance may damage the sewage material. After applying the highway is washed with water.

To eliminate traffic jams, acids and alkalis are used, one of these substances is caustic soda used to clean the sewage. It easily corps organic compounds, so it should be treated carefully. The drug can cause a chemical burn. They work with it in gloves and glasses, and the room should be constant access of fresh air. Soda cleansing technology is very simple: two spoons of caustic are falling asleep into the drain and poured a glass of boiling water. After 2 hours the flow is washed with water.

The popular cleaner for the sewer pipes "Mole" is made on the basis of caustic soda. It is used to remove deposits and prevention. Treatment of 1-2 times a month will save pipes from fat and food residues.

Safe method Floating alkali

Granulated funds

"FLUP" - the drug in the form of granules, produced by two types: for use with cold and hot water. Powder falls asleep into the draining in the recommended amount and poured with water. The time of action is 3-15 minutes, the pipe field is washed with plenty of water. The drug removes lime flask, fibers and food residues.

"Potechan" is a potent preparation that dissolves paper, hair, fat. You can not allow it to hit the skin, clothing and surrounding items. Powder falls asleep in dry drain and after 3 minutes poured with hot water. After another 3 minutes, the pipe is washed with warm water.

Choosing a chemical to clear the blockage in the sewage pipes, recommendations should be taken into account for use for various materials.

Sealing gels

Among gel preparations, Mr. Muskul and Tiret uses popularity. Both means are universal, they can be used for plastic and metal pipelines. Geli is effective with minor stamps and as prevention.

An effective method for removing plaque and garbage plugs is a sewage cleaning with a hydrodynamic method. To perform it, you must send a hose with a metal tip and nozzles. In high pressure, water is supplied under high pressure, which through the nozzles is sent to the walls of the pipes. For work, a pump is needed, inserting up to 190 MPa. The movement of the nozzle is carried out due to the jet rocket, directed to reverse side. The nozzle pierces the sewage, and the water removes deposits.

The efficiency of using the hydrodynamic method

Council. The hydrodynamic method is safe and productive, it is suitable for any type of pipes.

Perform the hydrodynamic troubleshooting allows you to purchase a sewage cleaning machine. Such an aggregate has different sizes and modifications:

• manual - work as a household pump with a hose;
• petrol - powerful and effective devices copble with a blockage in the pipes of large diameter;
• drums - work from electricity, used for internal and external sewage networks.

Regular prevention of sewage pipes will save from the need to deal with a blockage.

Do not forget to rate the article.

The reasons why blocks are formed in the sewage pipes, several: incorrect installation, careless operation of the sewer system, old pipes. But the consequences are always the same - a plug appears, which makes it difficult to move wastewater.

In this case, you need urgent cleaning of sewer pipes. Next, we explain in detail what instruments and technologies will be required.

If the sinks are not installed on the drain holes of the sinks, household waste fall into the siphons and pipes, and the fat is settled on the walls. Sooner or later, the thickness of the layer becomes such that the dirt prevents the free passage of the fluid and any solid particles are capable of tightly clog pipes.

There are several signs for which you can define problems in the operation of the system:

1. Sewer Stena. Waste, accumulating on the walls of pipes, publish a characteristic nasty smell. It enters the room and poisoned air. If there is a sink or bath, you should take action as soon as possible.
2. Slow plums of water. If the fluid is bad, it means that too many deposits accumulated on the walls of the pipes. They are time to remove. Often it is enough to just pour boiling water into the sink. Fat dissolves and leaves the sewerage.
3. Full stop of the device. If the water stopped to drain into the sewer system at all, it's time to take up the plumbing cable, because Semi-dimensions here will not cost, and special chemistry is unlikely to be effective.

Most often, the sewage is clogged with food waste, hair, fat and dissolved detergents. Such traffic jams can, without the help of plumbers with special tools.

Protein and fat deposits remain on the inner walls of the sewer pipes. Under the influence of bacteria, they decompose and stink. The gases include a poisonous hydrogen sulfide, which negatively affects the state of the central nervous system. It can cause headaches, fainting, depression

In most cases, it is much easier to prevent the appearance of blockages than to clear them later. If the sewer system is in order, then the dirt tubes in the pipes appear only due to the negligence of residents at home

If the blocking is completely overlapsing the pipes, water begins to accumulate in the sink or bathroom, overflow through the edge. This may end up not just expenses for plumbing services, but also a full-fledged sanuce.

It is not necessary to bring the system to such a state, it is better to immediately respond to the "first bells". It's cheaper.

Mechanical and chemical pipe cleaning

If the blockage was formed due to a solid object hitting a system, specialists will have to be invited to clean the sewer tubes. They use their own tools and equipment - long high-strength cables and special machines, incl. Pneumatic, drill, root.

Often, you have to resort to the hydrodynamic cleaning method - punch a complex blockage of a stream of high pressure water. Depending on the plug density, the pressure may be minimal or reached the limit indicators - 200 or more atmospheres

Less serious blockages can be eliminated independently - with cables, voices, special household chemicals for cleaning sewage. The most reliable device coping with almost any traffic jams is a plumbing cable.

He saves in situations when other means are useless. But simple blockages can be eliminated using vehicles or chemistry.

Option 1: Plotted cable

This is a universal tool for cleaning sewage. It is made of metal springs. Due to the high length of the cable, difficulties may arise in order to hold and turn it, so manufacturers pay attention to the hands of their models. Nozzles are fixed on the working part of the cable, thanks to which you can destroy any dirt plugs.

Gallery of images

A clogged sewage system is unpleasant, but, unfortunately, a common problem. It will unnecessarily remind that it requires an immediate solution. Today on the Beton-Area website, we will highlight the question in detail: how to clean the sewer pipes at home? Consider methods of mechanical and chemical cleaning. From a variety of proposed options, you can easily find applicable in your situation.

Causes of clogging of sewer pipes

No efforts to protect the drain system in the house from clogging do not guarantee 100% success. Even the smallest mesh on the drain hole and the constant use of hot water is not pure pipe. What is the reason for the cause of weed traffic jams in the drain system?

Main blocks of blockages in drain pipes:

Signs of clogging of the drain system

It is easy to understand that the sewage system is very simple. Two main features will be told about this:

• stagnation of water in the sink, bathroom or toilet;
• an unpleasant (rotten) smell isolated from the drain pipe.

List of effective sewer cleaning methods

Specialists advise in the case of clogging of the drain system to resort to one of the following methods:

• mechanical cleaning;
• chemical cleaning;
• cleaning with screwdrivers.

• clogged place
• challenge
• pipe material.

There is no fundamental difference between the cleaning of the sewage in the apartment and the private house. IN own homeHowever, there is a possibility of exposure to a piece of drain system, which goes beyond the dwelling.

Mechanical cleaning of plum pipes

The implementation of the mechanical cleaning of the sewage without calling a specialist is possible only if there is necessary equipment. The most primitive tool that is easy to apply at home is Vanutuz.

Cleaning sewerage Vantum

This simple device is almost every hostess. If you think that you don't need Vantuz in your home, you should know that most of the "fresh" blockages are easily eliminated by this uncomplicated tool. To quickly remove a blockage from the pipe, you need to dial some water into the sink or bathroom, press the vanatuz to the hole and press the handle with force several times. Under the pressure of the air, water together with the formed by the accumulation of dirt will rise up. Such an action must be done several times until it becomes obvious that the pipe cleared.

Pipe cleaning Plumbing cable

This adaptation usually saves situations in which Vanutuz did not help. These are usually cases with a solar cork or jam in a large garbage tube. Rarely, who holds a plumbing cable in an apartment or house just in case, but it is definitely to have representatives of the organization's serving house.

Pipe cleaning algorithm Plumbing cable:

• Remove the siphon.
• Insert the cable in the clogged pipe.
• Rotate the knob of the device to push it to the ground.
• We take out and clean the cable and repeat the previous steps.
• Pour several liters of very hot water into the pipe.

Chemical method of combating sewer plugs

Specially produced funds on a chemical basis corrode the resulting mud tube. The range of similar preparations is pleasantly surprised by the problem of scored sewerage. But how to choose? During the long years, consumers were able to allocate the most effective means in the modern market of cleaning products. The first two honorary places in the number of positive ratings were taken:

• "Mole",
• "Tyur".

Among decent rivals, you can call the brands well familiar to our consumer: "Domasetos", "Mr. Muskul", "Antisators", "Titan".

Remedies are available to eliminate a blockage in a drain system in a dry, liquid or gel form, but this in no way affects their effectiveness. To eliminate the tube from the pipe, it is necessary to simply follow the instructions glued to the package. Usually you need to place a certain amount of the product in the pipe, and after a strictly defined time, rinse the drain system with water.

Before buying the drug, you must make sure that it is designed to work with pipes in your home. Also, you should not use more than the specified amount of means for one reception and not to increase the exposure time at its discretion.

"Mole for cleaning pipes"

Krot is produced in Russia and has a lot of positive feedback from users. Powder or liquid for cleaning sewer pipes is easy to use and is able to cope with almost all the clouds. The tool corps fat and other contaminants in the pipes due to aggressive impact. Because of this, the property should consider the material from which the drain system is made.

Magnificently cleaning pipes, "Mole" can harm the human body if not taken action. In mandatory, the hands and respiratory organs should be protected. Several varieties of pipe cleaning agent called "Mole" are distinguished by the degree of exposure.

"Tyret"

The gel-like tool enters our markets from Germany. Over the years of import, Russian hostesses were convinced of the effectiveness of this drug in the destruction of mud plugs in the pipes. Tiret is recommended to use not only in the fight against pollution in sewage, but also to prevent such problems.

A small amount of gel is enough to dissolve a dense tube in the sewer pipe. The tool quickly applies over the drain system, dissolving the deposits on the walls of the drain channel. At the same time, Tiret is considered to be a gentle drug, so it is suitable absolutely for any pipes.

Elimination of a blockage in the drain system with remedies

There are several ways to clean the flow system without special devices and chemical preparations, we will consider the most demanded due to efficiency. It can be attributed to chemical method Cleaning, as the reaction of two substances fell in its foundation: vinegar and soda. This option The fight against clouds in the pipes elects violent opponents of poisonous chemicals or those who simply did not turn out to be at hand. No matter what reason you attracted this method, in any case, it will prove its effectiveness.

So, what will be required to destroy the mud tube in the pipe? Plugs of food soda and shelter of warm table vinegar. At the end - boiling water. For confident success, it should be done in strict sequence:

1. Pour into the drain hole soda.
2. Pour into the pipe vinegar.
3. Cover drain with a rag and leave for 30-60 minutes.
4. Fill in stock at least 3 liters of boiling water.

What's happening? Vinegar occurs with soda and a stormy chemical reaction occurs, in the process of which mud plug dissolves. Actions inside the pipe will be similar to the volcano eruption - which is why the hole is better to cover with a rag. At the end of boiling water, liquid dirt is washed away and comes out naturally. The normal current of water will be restored, the rotten smell propagating from the pipe will disappear.

Combined method of combating a blockage in a pipe

For an absolute victory over a plug in a drain pipe, many home and hostess apply several ways to clean. One of the common combinations includes:

1. Washing pipes hot water.
2. After 10 minutes, the use of vanza.
3. Falling asleep soda and pouring three times more boiling water.

All these techniques in the interaction will leave the pipes completely clean, putting the plums in the house. Such disinfection will eliminate unpleasant odors, coming from the pipe. Specialists advise regularly clean the pipes, regardless of whether they scored or not. Prevention will help to avoid serious problems with the drain.