Any physical activity is useful for kids develops a motorcycle, coins the reaction, it is advantageous to the CNS and the bone-muscular system. But it is necessary to take care that the child be able to move and do exercises.
Movement is necessary for children of any age. However, if for schoolchildren there are many options for sports complexes and simulators, they can be written to the pool or dancing, then for the kids of the preschool age, there are not so many opportunities. It should be borne in mind that the exercises must be applied in a game form so that the child does not lose interest and enjoy the useful classes. One of the most convenient and available methods Ensure the baby the opportunity to actively move these home trampolines and trampolines for the street or cottage. Classes with such mini-simulators are real joy for children, so they gladly frolic and jump, developing their abilities and training the muscular apparatus. Today the market offers many options for children's trampolines, you can find a model that meets your taste and capabilities. Despite this, some parents prefer to make trampolines with their own hands.
There is no single technology for which you can make children's trampoline Each family finds its ways for this. Consider one of these ways that you can easily create a small trampoline for your baby. To do this, it is necessary to buy two identical hoops with a diameter of approximately 115 cm, 6-8 wooden shells with a length of about 20-30 cm, a strong tissue (for example, a tarp), as well as a cloth for a cover, a thick rubber band (an elastic rope that can replace the springs). Wooden lumps that act the role of legs should not be concerned, should not crack when picking. This is the guarantee of the reliability of the whole design. To secure hoops, you need to either make in each bar for two wide holes closer to the upper and lower ends, or make neat cuts that guarantee that the hoop will be securely secured and will not fly. The number of "legs" can be different, but the optimal amount of 6-8 pieces. After the holes are ready, it is necessary to turn hoops to them so that the legs are at the same distance around the circumference of each other. You will have a design that is a frame of a future trampoline. Next, it is necessary to take a dense durable fabric, cut a circle from it, a little smaller diameter than the hoop, adjust the edges and flash. It is sewed with a loop in the amount of about 16 pieces at an equal distance from each other. Instead of this design, you can entertain a thick wire. In the first case, the rubber band is in the loop, in the second to wire through small holes in matter. The gum turns around around the upper hoop, and the formed loops is better to further fix, for example, with the help of rubber pieces and scotch. Now you are already ready to trampoline, but it has holes between matter and hoop that may be dangerous for the child. Therefore, it is best to sew a case, dressed above and tightened by a rope under the upper hoop. It should be borne in mind that it is difficult to make a fully functional and safe design. Manufacturers calculate the indicators of the strength of materials, the reliability of the entire mechanism, so they can give a warranty on their products. In the case of the manufacture of a trampoline with their own hands, it is necessary to rely only on common sense and experience, carrying all responsibility for the safety of the child.
The cottage is considered an excellent family area where adults can relax from the working everyday life, and children sweep their energy in clean air. To protect the games of little fidgets, other parents are placed on country areas Batuts. These simulators can be purchased in the finished form, and independently make it yourself from the remedies.
Children's trampoline is a device intended for jumping. Classes on it have a positive effect on the whole organism. The kids not only get a lot of pleasure and pleasant emotions, but also develop the vestibular apparatus, motorcy and the bone-muscular system. Despite the fact that recently you can find a lot of trampoline models, they are quite realistic to build them yourself. You can collect trampoline with your own hands from various materialBut that the jumps become safe, the protective grid must be present in their designs.
In the manufacture of a trampoline at home, it is important to pay attention to the strength of the frame and the installation of springs.The main feature homemade trampoline It is believed that in them one side is attached to the frame with springs that require a special placement scheme. Initially, you need to perform the primary hook, attaching the springs to each third loop. Observe the pitch in two loops is necessary so that the elements are not deformed, but evenly stretched.
For a homemade simulator, it is best to choose long springs.In addition, it is important to pay attention to the selection of material for the frame - it should be durable. Before making a children's trampoline, you should decide with it with sizes, in advance drawing a drawing.
Country trampoline can be made from ready-made parts that are sold in a wide range. If there is no possibility to purchase them, then for the assembly you can use suitable techniques. For example, a frame from a metal hoop, which is done by a drill the required number of holes. It will also be needed wooden baroK - It will have to cut it on 8 identical pieces, no more than 30 cm long. In wooden parts, holes are made, the diameter of which should be several millimeters more than those in the hoop.
To create mat, it is necessary to choose a solid material.It is good for a tarpaulin. It is sewn from it, in size, the corresponding trampoline circle.
And also children's trampoline can be made of the chamber. There are many options for creating a home simulator, the only thing that the material from which it is planned to be assembled should be reliable and high-quality in operation.
Make a trampoline for your baby is not difficult if you show zeal and a little fantasy. Of course, at home it is not possible to create a chic projectile, but the modest home-made simulator will serve as a great place for the games of the little fidget. Before proceeding with the workflow, it is important to decide whether a spring trampoline or inflatable with a grid.
The first species is made of metal support and mat attached to the frame with springs.Its for safety is equipped with a protective net. The second one is difficult at home, so it is better to refuse to refuse it.
In the event that his assembly of a children's trampoline is performed for the first time, the following instructions will help beginner masters.
The above design is simple and it is quite realistic to assemble with your own hands. This product is practically nothing inferior to the factory. If the trampoline is going for kids, then it must be additionally covered with a grid or put it under the mat. This will protect the game little child. Such a simulator is perfect for children by age up to 12 years, teenagers should collect more powerful designs.
Some craftsmen make cottage from the car from the car.They are closer to the protector drill drill holes, observing a step in 2 cm. Then a sturdy rubber or thick cord "cushion" open middle part of the tire. As a result, it turns out a tight stretched grid, it will perfectly support tarpaulin and protect the child from injuries. In such a design, you can do without legs, because the tire has sufficient height.
About how to make a trampoline with your own hands, see the next video.
However, this does not mean that the number of "Kulibins" decreased. With due attention to the details and understanding of the principle of work, you can make a more or less suitable sports projectile, such as a trampoline. But we warn you that unverified and not certified design can be truly dangerous to health! Therefore, it is not necessary to take on experiments if you do not have, at least, an approximate idea of \u200b\u200bhow to reduce the trauma. If the desire to experiment still remains, we offer you several variations of structures.
Perhaps the whole sign is such a primitive way to entertain how batto jumps In the form of an old bed with a grid. This design is quite reliable, but has many sharp corners and solid jumpers. To safely jump on it, it is necessary to remove all the angles, the frame to cover the tight, but soft material and sew a cover that would cover all dangerous places.
Another option is to wear a frame with a grid in the ground so that the hardest jumper did not take to the bottom of the pit. The edges are best close to mats.
More technological, labor and interesting option - It is a trampoline from the metal hoop. You will need two hoops that need to be placed on each other by connecting with metal or wooden legs. Next, a special dense tissue is purchased, for example, a tarp. The edges are processed to protect against rupture and around the perimeter cut into the size of the hoop, the circle is sewn with a loop. Conspose the resulting cloth to hoops with a thick rubber harness. The case is also needed around the perimeter of the structure and the lining in the form of a dense foam rubber.
If there is no hoop, then a large car tire is suitable for the structure of the web from the previous "recipe". Usually such designs are suitable only for the smallest jumpers.
Of course, the best and safest option extreme Parameasure jumps - this is the purchase of a certified product. The cost of some models is quite accessible, on average, the trampoline will cost 3-35 thousand rubles.
If you just want to forget the household problems from time to time and plunge into the world of extreme, then we are in specialized halls. We wait!
Consider some more devices that can be equipped with your homemade sports corner. This time the emphasis will be put up towards children's sports and entertainment devices.
It is made of wooden bars or logs of different lengths (2 vehicles with a length of 2.8-3.0 m and 2 Bar 2.0-2.2 m). The distance between the inscuffed logs 80 and 60 cm. Rack logs are connected by two crossbars at an altitude of 1.8-2.0 and 1.3-1.5 m. For this, three wells are cut into the upper ends, and another one - at the level The tops of a small log cabin, on the side of the big. In the wells put trimming water pipeswhich fix strips of leaf iron with nails. In front of the large logs of racks in the ground, a support for repulsion of feet is bought. So that the poles are not bent, put them on the grounds in the holes by stones, broken bricks And concrete. At the big crossbar, you can strengthen the swing made from cords and boards. To one of the top racks, adjust the homemade basketball basket for throwing balls into target. At low crossbar, strengthen the rubber harness. Looking at him, the child is easily, without excessive effort, pulls away.
In Wiste, on the crossbar, tightening with various positions of legs, wrapping, imitation of cycling in Wiste, turns of the body to the sides, etc.
The simplest simulator for the development of jumpers. The best device to please your children and give them a lot of positive emotions. To make the thrumper with your own hands, you should attach two rubber shock absorber among the ends to the belt, and others - to two hooks, driven into the logs, covered in the ground 50-80 cm from each other from the sides of the engaged. Jumping up, you can adjust the resistance, moving forward or backward from the hooks.
The most simple examples of WESEE and Espander type expander.
"WASES" (Women's Espander) consists of a wooden platform, to which the spring (or several springs) is engaged in the spring (or several springs) or rubber shock absorbers with handle.
It consists of steam levers 1 with traverses 2, moving by finger 3. On the lower lugs of the levers from the wire, there are ears for fixing the cauliflower-shock absorbers 4 from ordinary classic expander. These levers with traverts are made of wooden rails bonded by durable connections. Main sizes are shown in the figure. The levers attach one or three shock absorber. When performing exercises, breasting muscles and a number of others are well loaded, which, during classes with stretching extenders, do not experience such stresses.
Rod - a noisy projectile, rather complicated in the manufacture. It is successfully able to replace the original device invented by Polish specialists. Maintaining the device "Griffing" does not require in the manufacture of expensive materials and does not have special difficulties in performance. For the peel, a pine board 1300x250 mm is needed, as well as two bar and four rings made of steel with a diameter of 90 mm for fastening belts and shock-absorbing rubber harnesses, and for connecting rings with a dysmot - two metal stripes. A segment of a plumbing pipe with a diameter of 30-50 mm and a length of 1300 mm can be used as a grid of the rod. By connecting all the details properly, we get a projectile.
It is made of logs of different diameters long 3-4 m. On it you can perform a variety of power exercises, lifting the log, holding the handle of the simulator (standing, standing in the slope, sitting), squeezing under the log and so paragraph.
This gymnastic shell is useful. As well as the jump, he will give children a lot of laughter, fun and pleasant impressions. Trampoline for children is quite simple independent manufacture - It would be space for its installation. Frame (1.4x1.4 m) is performed from water pipes. The perimeter strengthens 72 homemade springs from four shoulder expenders. In the middle, the tarpaulin is 100x100 cm. The frame is strengthened on the ground in the ground and concreted racks. On the side can be attached to the ladder. The trampoline must withstand the weight of an adult. Around the projectile is released from foreign objects 1.5 ~ 2-meter zone.
All caring parents seek to teach their children to sports so that they grow strong and healthy. But how to interest little fidgets? This task can be solved with the help of a children's trampoline, in which the kid and his friends will be able to have fun and physically develop.
Jumping on this shell contribute:
Since the scope of application of the shells under consideration is rather wide, conventionally can be combined into three types:
Specialized stores are moving the diversity of home trampoline selection. In order not to be confused, you need to answer a few questions for yourself: "Where it will be used (in the house or on the street)", "children of what age", as well as to establish a marginal purchase budget.
So, trademark Hasttings is engaged in production sports Batutow High quality, not too frozen on design. Externally, these are strict and simple shells that will seem uninteresting kids, but will be assessed by schoolchildren. Depending on the size and configuration, the price of them varies from 2 to 35 thousand rubles.
The Berg's Dutch brand offers a wide range of trampolines: classic and inflatable, different shapes and colors with a high degree of security and quality. But the price range is an order of magnitude higher: 12-46 thousand rubles.
The HAPPYHOP trademark specializes in the production of inflatable children's trampolines. They are made in the form of entire inflatable towns and are perfectly suitable for installation in the country or the playground. Their cost ranges from 2 to 50 thousand rubles.
Intex, which is widely known as a manufacturer of a large range of inflatable products, offers budget models (1-5 thousand rubles) children's trampolines. These products are characterized by durability and safety for the smallest jumpers, since all products are thorough testing and a versatile study.
Unfortunately, not all parents have the opportunity to acquire such a popular projectile for his child. But you should not despair, because the domestic trampoline is quite possible to make him own. Let not be so gorgeous, as shown in the advertisement, but the only one in its kind.
Before proceeding with work, you should decide what type of projectile you will do. Spring and inflatable trampolines are most popular in children. The first view is nothing but a metal support with attached (with the help of built-in springs) a trampoline, which ideally surrounds a protective grid that prevents the child's fallout when jumping. The second type is inflatable: undoubtedly, very bright and popular, but its manufacturer is better to entrust professionals, because a home inflatable trampoline is the "task with three asterisks."
This simple instruction explains how to make a home trampoline.
It is unlikely that there are ready-made details to design a trampoline in the home of the average family. It is not scary, because they can be made of remedies. As a frame, an iron hoop can serve as a drill need to drill holes. Next, you need to take a wooden bar, which can be cut into 8 equal parts (0.3 m) and it should be done in them, slightly more (by 2 mm) frame diameter. Hangs disconnect and proceed in the resulting openings.
If the edges of the tarpaulin sew a durable loop and turn a strong rubber to them, they will get a battle mat that will remain just wrap around the hoop. From the same material you can make a cover and put it on the design to avoid the child's feet falling into holes. So, from the primary materials, a domestic trampoline is performed for children.
If the above-described materials did not turn out, you should not lose heart. There are still many different, in the first glance of unnecessary things that will help in this matter. So, if you take the grid from the old Soviet bed and the springs, connect them with a durable metal or wooden base, it will be a domestic trampoline with a grid. In this option, you need to pay attention to: remove sharp details and use soft Material For wrapping a solid base. An alternative when building a home trampoline is the option when the spring grid does not need to be put on the elevation, and the frame is placed on the ground with a prejudgered deepening. The pit should be sufficient depth so that the largest jumper in weight did not touch her bottom during jumping. The edges of the metal frame must be burned into the ground or to cover with soft mats.
Amazing but even with the help of old automotive tire You can make a domestic trampoline. An ideal in this case would be a tire from a large tractor wheel due to its large diameter. At a short distance (about 3 cm) from the edge of the upper edge of the tread, we will do the holes through which the rubber cord or the rope will pass. Fix inside the linen for jumping, made as described above in step-by-step instructions. The stiffness of the structure can be adjusted if there is a metal hoop or wooden board The required diameter.
At the trampoline made with their own hands, there are two undeniable advantages over factory "counterparts":
Of course, factory products are much won in the variety of sizes, models and colors. And the more buying budget, the wider choice. And at the finished inflatable trampolines and there is no competition at all, because they are almost impossible to make them. For small children, inflatable home trampolines are very often chosen. Customer feedback on this projectile is predominantly positive: it performs its entertainment and sports functions, not inferior to analogues in strength and security.
