Electro-hydraulic drives Siemens SKP25.003E2 together with valves (VGG ..., VGH ..., VGF ..., VGD2, VRH ..., VRF ...) Designed for use with oil gases I-III and air. As a rule, applied on gas generators. Actuating mechanism For gas valves, Siemens SKP25.003E2 operates as a constant pressure regulator with an installation spring. Together with the valve provides the function of the shut-off safety valve with the gas pressure regulator / controller. This drive is mainly used with gas burners With forced boost (with mechanical or electronic adjustment of the mixing of fuel and air). Siemens SKP25.003E2 servos are slowly open and quickly closed. Have low power consumption. It is possible to connect the detachable connection, the stroke indication and electrical display. Drives SKP25.003E2 are supplied without a limit switch.
AGA63.5A27 - Heater for the actuator type SKP;
- AGA64 - Cable socket DIN EN 175 301-8;
- AGA65 - DIN EN 175 301-803-A / ISO 44 connector;
- AGA66 - a set of gaskets for installation between drive and valve (VG ... / VR ...);
- AGA67 - connector;
- AGA68 - Plug Connector for AGA62.000A000 for sharing valves
vendor code | BPZ: SKP25.003E2. |
Voltage network | 220 B. |
Network frequency | 50 Hz |
Power consumption | max. 35 VA (in stage 2) |
Degree of protection | IP 54 * |
Security class | I. |
Closing time | less than 1 sec. (when you turn off) |
Opening and closing | 1-speed |
Limit switch | - |
Equipment | with pressure regulator up to 22 MBAR |
Weight | 1.6 kg |
* - Provided only with installed connectors (provided that the central screw attachment corresponds to the connector)
Gas valve drive SKP25.003E2
SKP 25.003 E2 drive for Siemens gas valves is an actuator, or as they are also called, the SCP-25.003E2 drive for the Siemens valve is equipped with a pneumatic bypass controller, which provides a single-stage opening or closing of the valve. Swing pump is located inside the oil chamber. The spring of the executive mechanism of the gas valve is replaceable and can be selected for various operating pressure. Plug connections, connecting cable, sedative choke, springs and additional seals can be additionally purchased with the valve (option) or separately. The SKP 25.003E2 drive provides a quick closure and slow opening of the Siemens gas valve. Executive mechanism SKP25 Work as a pressure regulator in various ranges (the pressure range depends on the type of the installed spring. The SKP25 drive ... controls the bypass valve through the pneumatic controller, opening the gas valve. Used on gas valves (installed) on the upgrade burners of a fan type with mechanical or electronic adjustment of the fuel / air ratio.
The main parameters SKP25.003E2. | |
Name | SKP25.003E2. |
Purpose | Gas valve drive Siemens (executive mechanism) |
type of drive | Electro-hydraulic, opening / closing of the bypass valve |
Opening speed | approximately 2 mm / second |
Closing speed | < 0,8 секунды |
Time of complete opening | 6 - 10 seconds |
vendor code | BPZ: SKP25.003E2. |
Food | AC 220 - 240 V / 50 Hz |
Limit switch | Not |
Pressure regulator | Permanently performs a constant pressure regulator |
Optional equipment (accessories, options)
Photo | Short description | Price |
AGA63.5A27 -Heating element - for use when low temperatures ambient (<-10 °С) | on request |
|
Aga62.000a000 -Connecting cable with connectors - for the power supply of two performing mechanisms on a double gas valve (VGD ...) with a connector (AGA64) | on request | |
AGA 64. - Connector for actuator - plug connector in accordance with DIN EN 175301-803-A - Triple Pole - 6 ... 9 mm diameter. / Max. 1.5 mm² | on request | |
AGA 65. - Connector for the terminal switch - plug connector in accordance with DIN EN 175301-803-A - Triple Pole + - 4.5 ... 11 mm diameter. / Max. 1.5 mm² | on request | |
AGA22. - Yellow - 15 ... 120 mbar - Standard spring for SKP25.4 (0 ... 700 mbar) | on request | |
AGA23. - Red Installation spring for SKP25 ... - Options to Standard Spring AGA29 - 100 ... 250 mbar - 0 ... 1500 mbar when installing on SKP25.4 (option for AGA22) | on request | |
AGA28. - Installation spring not painted for SKP25.3. - Options to Standard Spring AGA29 - ± 1.5 mbar | on request | |
AGA29. - Installation spring not painted For SKP25 ... - 0 ... 22 mbar | on request | |
AGA25 - Soothing choke for SKP25 ... - option (comes additionally, at the request of the buyer) | on request | |
AGA66. - Set of seals (mounting pads) - for installation between the actuator and valve - increases protection from IP 54 to IP 65 - When using single VGG valves ... - Install in strict accordance with the instructions | on request |
Gas valve drive SKP25.003E2 Designed for use with oil gases I ... III and air. Basically, the drive is used on heat generators that operate on gas. The drive opens slowly, and closes quickly. The drive for the gas valve can be supplied with a limit switch (for example, to indicate a fully closed position).
Dimensions:
Cut-off safety valve (SKP15 ...)
Main applications:
Atmospheric burners with modulating or multi-stage work
- Separate burners or burners in industrial furnaces
- Installation with remote control of gas / air ratio on burners with direct mechanical bond
Executive Mechanisms for Gas Valves
The ON function (ON) / OFF (OFF) of the safety cut-off in accordance with EN 161 is connected to SKPX5 ... Siemens drives and gas valves
Slow Opening (Fast Closing)
Very low power consumption
For use with oil gases I ... III
As an option with / without a limit switch (factory setting)
The ability of the detachable connection
Electrical indication of work
Display
Executive mechanisms SKP ... Designed for use with the following types of valves: VGG ... VGF ... VGH ... Natural gas Oil gases I ... III N7636 VGD2 ... VGD4 ... Natural gas Oil gases I. ..Iii N7631 VRF ... VRH ... biogas (applied with SKPX5 ..., on demand) N7633 VLF ... Hot air N7637
Siemens SKP25.003E2 - Gas valve drive
Mark company offers you a wide range of Siemens products and building security departments.
We always support the current presence in the warehouse of the most sought-after equipment Siemens of this Department. For example, you can buy a drive for the SKP25.003E2 gas valve, the price will be acceptable, because We work directly with Siemens without intermediaries and can offer the best price in the market. In addition, Mark LLC additionally provides individual discounts for its customers.
If you have any questions related to the SKP25.003E2 gas valve, such as: stock availability, price, delivery in Moscow, sending to the regions or to the transport company terminal, specifications, description, documentation, warranty, instruction Operating, applied, analogues from third-party manufacturers and other questions, call our specialists by phone, or write a letter to email.
The drive for the SKP25.003E2 gas valve is available at the most reasonable price, you can buy in Mark LLC.
Electro-hydraulic drives Siemens SKP25 are designed to control Siemens gas valves, which are used to regulate the stream of natural, associated petroleum and other gases, carrying out a safety cut-off function.
Siemens SKP25 drives provide a slow opening, quick closure of the gas valve. SKP electric drives are able to monitor the gas pressure drop in the gas pipeline depending on the pressure drop in the air supply channel. The execution provides for the presence or absence of a limit switch.
Technical characteristics of servo drives SIEMENS SKP 25 drives:
Model | Voltage | Limit switch | Equipment | Opening and closing |
---|---|---|---|---|
SKP25.001E1 | 110V. | V. | 1-speed | |
SKP25.001E2. | 220V. | V. | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.001F2. | 220V. | V. | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.003E1 | 110V. | - | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.003E2. | 220V. | - | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.003E2Y. | 220V. | - | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.011U1 | 110V. | V. | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.011U2. | 220V. | V. | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.012U1 | 110V. | - | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.012U2. | 220V. | - | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.013U1 | 110V. | - | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.013U2. | 220V. | - | with pressure regulator up to 22 MBAR | 1-speed |
SKP25.201E2. | 220V. | V. | zero pressure regulator | 1-speed |
SKP25.201E2L | 220V. | V. | zero pressure regulator | 1-speed |
SKP25.203E1 | 110V. | - | zero pressure regulator | 1-speed |
SKP25.203E2. | 220V. | - | zero pressure regulator | 1-speed |
SKP25.203E2L | 220V. | - | zero pressure regulator | 1-speed |
SKP25.301E2. | 220V. | V. | zero pressure regulator | 1-speed |
SKP25.303E2. | 220V. | - | zero pressure regulator | 1-speed |
SKP25.401E2. | 220V. | V. | 1-speed | |
SKP25.403E2. | 220V. | - | with pressure regulator up to 1,500 MBAR | 1-speed |
SKP25.411U1. | 110V. | V. | with pressure regulator up to 1,500 MBAR | 1-speed |
SKP25.601E2. | 220V. | V. | 1-speed | |
SKP25.603E2 | 220V. | - | electrical installation setup | 1-speed |
SKP25.611U1 | 110V. | V. | electrical installation setup | 1-speed |
SKP25.611U2. | 220V. | V. | electrical installation setup | 1-speed |
SKP25.612U2. | 220V. | - | electrical installation setup | 1-speed |
SKP25.701E2. | 220V. | V. | electrical installation setup | 1-speed |
SKP25.703E2. | 220V. | - | electrical installation setup | 1-speed |
SKP25.711U1 | 110V. | V. | electrical installation setup | 1-speed |
Gas valve drive. Brand SKP25.003E2.
The combination of the actuator and the valve ensures the following functions: - shut-off safety valve (SKP15 ...) - a luminous safety valve with a gas pressure regulator / controller (SKP25 ..., SKP55 ... and SKP75 ...) Electro-hydraulic executive mechanisms together With valves are designed for use with oil gases I ... III and air. Basically, they are used on gas generators. Executive mechanisms open slowly and close quickly. They can be combined with any higher than the named valve types and nominal valve sizes. The actuator can be supplied with a limit switch (for example, to indicate a fully closed position). For information on the classification of valves, see "Table definition table" in the description on the corresponding valve.
Network voltage | AC 100 ... 110 V | AC 220 ... 240 V |
1-step opening and closing, without a limit switch | ||
1-step opening and closing, without a limit switch, with the Ploudo 22 MBARTER regulator | SKP25.003E2. | |
1- step opening and closing, without a limit switch, variant of the zero pressure regulator | ||
1-step opening and closing, without a terminal switch, with a pressure regulator up to 1,500 MBAR, high pressure option | SKP25.403E1 | |
1-step opening and closing, with a limit switch, with pressure regulator up to 22 MBAR | --- | |
1-step opening and closing, without a limit switch, with pressure drop controller | ||
1-step opening and closing, without a limit switch, with a regulator of pressure ratio | ||
1-step opening and closing, without a limit switch, with a regulator of pressure ratio, with an enlarged parallel shift | SKP75.503E1 | SKP75.503E2. |
1-step opening and closing, with a limit switch, with a pressure ratio regulator, with an enlarged parallel shift | --- |