Ballu BIGH-4 gas infrared heater- modern economical heater for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any electrical connection at all. BIGH-4 is excellent for local heating of work areas on open areas where the use of traditional heating methods is ineffective. The possibility of local installation in a place where heating is required, provides an economical fuel consumption.
Thermal radiation of gas infrared heater, like sunlight, is poorly absorbed by air and reaches heated surfaces practically without loss. Heat is transferred directly to dense objects (floor, walls, etc.) Infrared heaters operate almost silently, do not overheat the air, do not mix air and dust. The power of the BIGH-4 heater can be infinitely adjusted in the range of 3.0-4.5 kW.
Ceramic Heater Panel undergoes special preliminary testing at the factory in order to identify imperceptible defects (microcracks, chips), which can subsequently lead to failure of the device. Class A is assigned to panels that successfully passed all tests. The panel is protected by a stainless steel grill.
The device is protected against gas leakage in the event of a flame extinguishing by means of a gas valve controlled by a sensitive thermocouple. If wind or other external influences extinguish the flame, the gas supply will immediately stop.
The panel body is covered with heat-resistant enamel. This coating will remain attractive for a long time. appearance and protects the device from corrosion. The detachable leg can be easily disassembled into 2 parts, allowing the device to be folded into a compact package when not in use.
The main: local heating of outdoor work areas and open areas.
Additional: cleaning surfaces from ice and snow and maintaining them in this state, heating and drying materials.
Construction zones, sites, open verandas, terraces, gazebos, etc.
Infrared heaters, unlike guns, do not heat the air, but the surfaces of objects and people in the area of action. The heating area depends on the power of the radiant infrared panel and the distance to the heating object. Objects located within a radius of up to 4-6 meters from the radiant panel, depending on the operating conditions, fall into the coverage area of the street heater.
Heating area BIGH-4 up to 60 sq.m *
* Indicated approximate heating area. The value may differ depending on actual operating conditions.
Security
Dimensions (edit)
Equipment
General characteristics
Performance
Functions and features
The BALLU gas infrared heater of the GAS COMPACT series is a modern economical heating device for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any electrical connection at all. The BIGH-4 model is perfect for local heating of work areas in open areas where traditional heating methods are ineffective. The possibility of local installation in a place where heating is required, provides an economical fuel consumption.
Thermal radiation of a gas infrared heater, like sunlight, is weakly absorbed by the air and reaches the heated surfaces practically without loss. Heat is transferred directly to dense objects (floor, walls, etc.) Infrared heaters work almost silently, do not overheat the air, do not mix air and dust. The power of the BIGH-4 heater can be infinitely adjusted in the range of 3.0–4.5 kW.
The ceramic heater panel is specially pre-tested at the factory. Class A is assigned to panels that successfully passed all tests. The panel is protected by a stainless steel grill.
The device is protected against gas leakage in the event of a flame extinguishing by means of a gas valve controlled by a sensitive thermocouple. If wind or other external influences extinguish the flame, the gas supply will immediately stop.
The panel body is covered with heat-resistant enamel. This coating retains its attractive appearance for a long time and protects the device from corrosion. The detachable leg can be easily disassembled into 2 parts, allowing the device to be folded into a compact package when not in use.
Features of the model
High quality grade A ceramic panel
Safety thermocouple for flame supervision
Gas hose with pressure reducer 1.5 m included
Infinitely variable power control
Directional local heating
Complete independence from power supply;
Absolute efficiency: 100% efficiency;
High quality premium ceramic panel A does not deform if water accidentally splashes on the appliance
Detachable leg: super compact package size;
Quick start-up: 1.5 m gas hose and pressure reducer installed.
Appointment
Basic: local heating of outdoor working areas and open areas.
Additional: cleaning surfaces from ice and snow and maintaining them in this state, heating and drying materials.
Scope of application
Construction zones, sites, open verandas, terraces, gazebos, etc.
Model selection
Infrared heaters, unlike guns, do not heat the air, but the surfaces of objects and people in the area of action. The heating area depends on the power of the radiant infrared panel and the distance to the heating object. Objects located within a radius of up to 4–6 meters from the radiant panel, depending on the operating conditions, fall into the coverage area of the street heater.
Ballu BIGH-4 gas infrared heater the Gas Compact series is a modern, economical heating device for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any electrical connection at all. Ballu BIGH-4 heater excellent for local heating of work areas in open areas, where the use of traditional heating methods is ineffective. The possibility of local installation in a place where heating is required, provides an economical fuel consumption.
Heat radiation gas infrared heater Ballu BIGH-4, like sunlight, is poorly absorbed by air and reaches heated surfaces practically without loss. Heat is transferred directly to dense objects (floor, walls, etc.) Infrared heaters work almost silently, do not overheat the air, do not mix air and dust. Power heater Ballu BIGH-4 can be infinitely adjusted in the range of 3.0–4.5 kW.
Main purpose gas stove Ballu BIGH-4 it is a local heating of working areas outdoors and open areas, it can also be used to clean surfaces from ice and snow and maintain them in this state, warming up and drying materials. Places where you can use infrared heater Ballu BIGH-4 varied: construction zones, platforms, open verandas, terraces, gazebos, etc.
The ceramic heater panel is specially pre-tested at the factory. Class A is assigned to panels that successfully passed all tests. The panel is protected by a stainless steel grill.
The device is protected against gas leakage in the event of a flame extinguishing by means of a gas valve controlled by a sensitive thermocouple. If wind or other external influences extinguish the flame, the gas supply will immediately stop.
Panel housing heat gas gun Ballu BIGH-4 covered with heat-resistant enamel. This coating retains its attractive appearance for a long time and protects the device from corrosion. The detachable leg can be easily disassembled into 2 parts, allowing the device to be folded into a compact package when not in use.
Features of the Ballu BIGH-4 gas infrared heater:
Ballu BIGH-4 gas infrared heater is a modern economical heating device for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any electrical connection at all. BIGH-4 is perfect for local heating of work areas in open areas where traditional heating methods are ineffective.
The possibility of local installation in a place where heating is required, provides an economical fuel consumption.
Thermal radiation of a gas infrared heater, like sunlight, is weakly absorbed by the air and reaches the heated surfaces practically without loss. Heat is transferred directly to dense objects (floor, walls, etc.) Infrared heaters work almost silently, do not overheat the air, do not mix air and dust. The power of the BIGH-4 heater can be infinitely adjusted in the range of 3.0-4.5 kW.
The ceramic panel of the heater undergoes special preliminary testing at the factory in order to identify imperceptible defects (microcracks, chips), which can subsequently lead to failure of the device. Class A is assigned to panels that successfully passed all tests. The panel is protected by a stainless steel grill.
The device is protected against gas leakage in the event of a flame extinguishing by means of a gas valve controlled by a sensitive thermocouple. If wind or other external influences extinguish the flame, the gas supply will immediately stop.
The panel body is covered with heat-resistant enamel. This coating retains its attractive appearance for a long time and protects the device from corrosion. The detachable leg can be easily disassembled into 2 parts, allowing the device to be folded into a compact package when not in use.
Basic: local heating of outdoor working areas and open areas.
Additional: cleaning surfaces from ice and snow and maintaining them in this state, heating and drying materials.
Construction zones, sites, open verandas, terraces, gazebos, etc.
Infrared heaters, unlike guns, do not heat the air, but the surfaces of objects and people in the area of action. The heating area depends on the power of the radiant infrared panel and the distance to the heating object. Objects located within a radius of up to 4-6 meters from the radiant panel, depending on the operating conditions, fall into the coverage area of the street heater.
Heating area BIGH-4 up to 60 sq.m *
* Indicated approximate heating area.
The value may differ depending on actual operating conditions.
The BALLU gas infrared heater of the GAS COMPACT series is a modern economical heating device for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any electrical connection at all. The BIGH-4 model is perfect for local heating of work areas in open areas where traditional heating methods are ineffective. The possibility of local installation in a place where heating is required, provides an economical fuel consumption. Thermal radiation of a gas infrared heater, like sunlight, is weakly absorbed by the air and reaches the heated surfaces practically without loss. Heat is transferred directly to dense objects (floor, walls, etc.) Infrared heaters work almost silently, do not overheat the air, do not mix air and dust. The power of the BIGH-4 heater can be infinitely adjusted in the range of 3.0–4.5 kW. The ceramic heater panel is specially pre-tested at the factory. Class A is assigned to panels that successfully passed all tests. The panel is protected by a stainless steel grill. The device is protected against gas leakage in the event of a flame extinguishing by means of a gas valve controlled by a sensitive thermocouple. If wind or other external influences extinguish the flame, the gas supply will immediately stop. The panel body is covered with heat-resistant enamel. This coating retains its attractive appearance for a long time and protects the device from corrosion. The detachable leg can be easily disassembled into 2 parts, allowing the device to be folded into a compact package when not in use. Features of the model High-quality ceramic panel of class A Protective thermocouple for flame control Gas hose with pressure reducer 1.5 m included in the delivery Smooth power regulation Directional local heating Complete independence from the power supply; Absolute efficiency: 100% efficiency; The high-quality premium ceramic panel A does not deform if accidentally splashed with water while the appliance is in operation Detachable foot: super compact package size; Quick start-up: 1.5 m gas hose and pressure reducer installed. Purpose Primary: local heating of working areas outside the premises and open areas. Additional: cleaning surfaces from ice and snow and maintaining them in this state, warming up and drying materials. Scope of application Construction areas, sites, open verandas, terraces, gazebos, etc. Selection of the model Infrared heaters, unlike cannons, heat not the air, but the surfaces of objects and people in the area of action. The heating area depends on the power of the radiant infrared panel and the distance to the heating object. Objects located within a radius of up to 4–6 meters from the radiant panel, depending on the operating conditions, fall into the coverage area of the street heater. Price, appearance, colors, specifications goods and completeness may differ from the real ones, check the information at the time of purchase and payment. All information on the site about goods is for reference only and is not a public offer in accordance with paragraph 2 of Article 437 of the Civil Code of the Russian Federation.
